INDUSTRIAL AND SYSTEMS ENGINEERING
To view listing from a different department, select department name from the right.Ron Aman
Assistant Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2015 Submissions
Journal Paper
Seifi, Mohsen, et al. "Evaluation of Orientation Dependence of Fracture Toughness and Fatigue Crack Propagation Behavior of As-Deposited ARCAM EBM Ti-6Al-4V." JOM 67. 3 (2015): 597-607. Web. *
Manogharan, Guha, et al. "AIMS — A Metal Additive-hybrid Manufacturing System: System Architecture and Attributes." Procedia Manufacturing 1. (2015): 273-286. Web. *
West, Harvey, et al. "Novel Materials and Structures Fabricated by Electron Beam Melting." Microscopy and Microanalysis 21. S3 (2015): 461-462. Web. ∆
Invited Keynote/Presentation
Aman, Ronald. "Metal Additive Manufacturing Overview and Recent Progress." Seminar. Naval Research Laboratory. Washington, District of Columbia. 7 Apr. 2015. Address.
Denis Cormier
Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2015 Submissions
Journal Paper
Yang, Li, et al. "Mechanical Properties of 3D Re-Entrant Honeycomb Auxetic Structures Realized Via Additive Manufacturing." International Journal of Solids and Structures 69. (2015): 475-490. Web. *
Das, Sourav, Denis Cormier, and Scott Williams. "Potential for Multi-Functional Additive Manufacturing Using Pulsed Photonic Sintering." Procedia Manufacturing 1. (2015): 366-377. Web. *
Yang, Li, et al. "Low-energy Drop Weight Performance of Cellular Sandwich Panels." Rapid Prototyping Journal 21. 4 (2015): 433-442. Web. *
Yang, Li, et al. "Additive Manufacturing of Metal Cellular Structures: Design and Fabrication." Journal of Materials 67. 3 (2015): 608-615. Web. *
Book Chapter
Parekh, D., Denis Cormier, and Michael Dickey. "Multi-functional Printing: Incorporating Electronics into 3-D Parts Made by Additive Manufacturing." Additive Manufacturing. Boca Raton, FL: CRC Press, 2015. 215-258. Print.
Published Conference Proceedings
Yang, Li, et al. "Shear Properties of Re-Entrant Auxetic Cellular Structures Made Via Electron Beam Melting." Proceedings of the Solid Freeform Fabrication Symposium. Ed. David Bourell. Austin, TX: n.p., 2015. Web. *
Mahajan, Chaitanya and Denis Cormier. "3D Printing of Carbon Fiber Composites With Preferentially Aligned Fibers." Proceedings of the Industrial and Systems Engineering Research Conference. Ed. N/A. Nashville, TN: n.p., 2015. Web.
West, Harvey, et al. "Novel Materials and Structures Produced by Electron Beam Melting." Proceedings of the Microscopy and Microanalysis Conference. Ed. NA. Portland, OR: n.p., 2015. Print.
Ouyang, Jing, et al. "Photonically Sintered PZT Energy Harvester." Proceedings of the International Mechanical Engineering Conference. Ed. NA. Houston, TX: n.p., 2015. Print.
Invited Keynote/Presentation
Cormier, Denis. "Biomedical Applications of 3D Printing." BME Departmental Research Seminar. University of Rochester. Rochester, NY. 1 Apr. 2015. Address.
Cormier, Denis. "Multifunctional Printing." MAE Departmental Research Seminar. North Carolina State University. Raleigh, NC. 11 Apr. 2015. Address.
Cormier, Denis. "Multifunctional Printing." ISE Departmental Research Seminar. Pennsylvania State University. State College, PA. 24 Apr. 2015. Address.
Cormier, Denis. "Medical Applications of 3D Printing." Xerox Research Seminar. Xerox. Webster, NY. 29 Apr. 2015. Address.
Cormier, Denis. "Novel Applications Using A 3D Printed Thermoplastic Elastomer." Solid Freeform Fabrication Symposium. University of Texas at Austin. Austin, TX. 5 Aug. 2015. Conference Presentation.
Cormier, Denis. "Multifunctional Printing: Opportunities and Challenges." New Horizons In 3D Printing, Digital and Additive Manufacturing Conference. SUNY Stony Brook. Stony Brook, NY. 29 Sep. 2015. Conference Presentation.
Cormier, Denis. "Aerosol Jet Ink Stabilization." Aerosol Jet User Group Meeting. Optomec. Hartford, CT. 21 Oct. 2015. Address.
Cormier, Denis. "Multifunctional 3D Printing." Xerox Research Seminar. Xerox. Webster, NY. 24 Oct. 2015. Address.
Cormier, Denis. "Multifunctional 3D Printing." ISE Departmental Research Seminar. SUNY Buffalo. Buffalo, NY. 31 Oct. 2015. Address.
Cormier, Denis. "Multifunctional Printing." Naval Research Laboratories Research Seminar. Naval Research Laboratories. Washington DC, Washington DC. 14 Nov. 2015. Address.
Cormier, Denis. "Introduction to 3D Printing." Printed Electronics USA. IDTechEx. Santa Clara, CA. 24 Nov. 2015. Conference Presentation.
Marcos Esterman
Associate Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2015 Submissions
Journal Paper
Takai, Shun, Marcos Esterman, and Ashok Midha. "An Approach to Study Associations Between Design Concepts and Design Outcomes." Journal of Mechanical Design 137. 4 (2015): 1-12. Print. £
Arciniegas, Alvaro J. Rojas, Marcos Esterman, and Juan C. Cockburn. "Toward the Control of the EP3D Printed Surface." Journal of Manufacturing Science and Engineering 137. 2 (2015): 1-10. Print. £
Chang, Shu, et al. "Direct Visualization and Three-Dimensional Reconstruction of Structures Formed by Electrophotographic Toner Powder Technology." Powder Technology 269. January (2015): 1-6. Print. £
Rojas-Arciniegas, Alvaro Jose and Marcos Esterman. "Characterization and Modeling of Surface Defects in EP3D Printing." Rapid Prototyping Journal 21. 4 (2015): 402-411. Print. ˜
Published Conference Proceedings
Takai, Shun, Michael Wagner, and Marcos Esterman. "A Pilot Study of Cognitive-Neuroscience Mechanism in Product Concept Evaluation." Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition,. Ed. ASME. Houston, TX: ASME, 2015. Print. £
Santucci, Alissa and Marcos Esterman. "Environmental Impact Assessment During Product Development: A Functional Analysis Based Approach to Life Cycle Assessments." Proceedings of the ASME 2015 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. Ed. ASME. Boston, MA: ASME, 2015. Print. ˜
Scott Grasman
Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2015 Submissions
Journal Paper
Hewitt, M.R., et al. "Integer Programming Techniques for Solving Non-Linear Workforce Planning Models with Learning." European Journal of Operational Research 242. 3 (2015): 942-950. Print. «
Juan, A.A., et al. "A Review of Simheuristics: Extending Metaheuristics to Deal with Stochastic Optimization Problems." Operations Research Perspectives 2. (2015): 62-72. Print. «
Invited Keynote/Presentation
Grasman, S.E., et al. "Department Chair Discussion on Tenure and Promotion." INFORMS National Meeting. Joint Session of the Junior Faculty Interest Group and Minority Issues Forum. Philadelphia, PA. 2 Nov. 2015. Conference Presentation.
Grasman, S.E., et al. "Flexible Work Structure and Due Dates in Workforce Planning Models with Learning/Forgetting." IIE Research Conference and Exhibition. Institute of Industrial Engineers. Nashville, TN. 1 Jun. 2015. Conference Presentation. *
Grasman, S.E. and C. Smith. "Ph.D. in Academia." IIE New Faculty/Doctoral Colloquium. IIE Research Conference and Exhibition. Nashville, TN. 30 May 2015. Conference Presentation.
Michael Kuhl
Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2015 Submissions
Published Conference Proceedings
Kuhl, Michael E., et al. "Relevant Education in Math and Science (REMS): K-12 STEM Outreach Program using Industrial Engineering Applications." Proceedings of the ASEE Conference and Exposition, June 14-17, 2015, Seattle, WA. Ed. Not Listed. Washington, DC: American Society for Engineering Education, 2015. Web. *
Tontarski, Clayton and Michael E. Kuhl. "OR Nurse Planning and Scheduling Under Uncertainty." Proceedings of the 2015 Industrial and Systems Engineering Research Conference, May 30-June2, 2015, Nashville, TN. Ed. S. Cedinkaya and J.K. Ryan. Norcross, GA: Institute of Industrial Engineers, 2015. Web. *
Kuhl, Michael E., et al. "Extending K-12 Industrial Engineering Outreach Programs and Accessibility Using Simulation." Proceedings of the 2015 Industrial and Systems Engineering Research Conference, May 30-June2, 2015, Nashville, TN. Ed. S. Cedinkaya and J.K. Ryan. Norcross, GA: Institute of Industrial Engineers, 2015. Web. *
Liu, Ran, et al. "Combined Inversion and Thinning Methods for Simulating Nonstationary Non-Poisson Arrival Processes." Proceedings of the 2015 Winter Simulation Conference, December 6-9. 2015, Huntington Beach, CA. Ed. L. Yilmaz, W.K.V. Chan, I. Moon, T.M.K. Roeder, C. Macal, and M.D. Rossetti. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, 2015. Web. *
Yanikara, Fatma Selin and Michael E. Kuhl. "A Simulation Framework for the Comparison of Reverse Logistic Network Configurations." Proceedings of the 2015 Winter Simulation Conference, December 6-9. 2015, Huntington Beach, CA. Ed. L. Yilmaz, W.K.V. Chan, I. Moon, T.M.K. Roeder, C. Macal, and M.D. Rossetti. Piscataway, New Jersey: Institute of Electrical and Electronics Engineers, 2015. Web. *
Deo, Devdatta and Michael E. Kuhl. "Activity Alternative Selection Considering Stochastic Reliability in Project Planning." Proceedings of the 2015 International Conference on Operations Excellence and Service Engineering, September 10-11, 2015, Orlando, FL. Ed. Not Listed. Novi, MI: Industiral Engineering and Operations Management Society, 2015. Web. *
Katie McConky
Associate Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2015 Submissions
Full Patent
McConky, Katie, et al. "System and Method for Remote Activity Detection." U.S. Patent 9098553. 4 Aug. 2015.
Invited Keynote/Presentation
McConky, Katie, Hector Ortiz-Pena, and Moises Sudit. "A Framework Supporting the Separation of Cognition Performance from Execution Environment." 2015 INFORMS Annual Meeting. INFORMS. Philadelphia, PA. 1 Nov. 2015. Conference Presentation.
Ruben Proano
Associate Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2015 Submissions
Published Conference Proceedings
Bullard, Joseph, et al. "Inference from Structured and Unstructured Electronic Medical Data for Dementia Detection." Proceedings of the 14th INFORMS Computing Society Conference. Ed. Brian Borchers, J.Paul Brooks, and Laura McLay. Richmond, Virginia: n.p., 2015. Print. «
Rachel Silvestrini
Associate Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2015 Submissions
Journal Paper
Silvestrini, Rachel T. "Considerations for D-Optimal Sequential Design." Quality and Reliability Engineering International 31. (2015): 399-410. Print. «
Jones, Bradley, et al. "Bridge Designs for Modeling Systems With Low Noise." Technometrics 57. 2 (2015): 155-163. Print. «
Kennedy, Kathryn, et al. "Prediction Variance Properties of Bridge Designs." International Journal of Experimental Design and Process Optimisation 4. 3/4 (2015): 234-255. Print. «
Brian Thorn
Professor
Industrial and Systems Engineering
Kate Gleason College of Engineering
2015 Submissions
Published Conference Proceedings
Thorn, Brian K. and Andres L. Carrano. "Development of a Sustainable Engineering Masters Program: The Path Ttaken and Lessons Learned." Proceedings of the International Conference on Engineering Education for Sustainable Development, Vancouver, Canada. June, 2015. Ed. Unknown. Vancouver, Canada: n.p., Web. *
Bayus, Jacob and Brian K. Thorn. "Environmental Analysis of Aluminum-based High Barrier Flexible Packaging Alternatives." Proceedings of the Industrial and Systems Engineering Research Conference. Nashville, Tenn. May, 2015. Ed. S. Cetinkaya, J.K. Ryan. Nashville, Tenn: n.p., Web. *
Warner, Mary and Brian K. Thorn. "Lifecycle Assessment of Four Common Road Deicers." Proceedings of the 2015 Industrial and Systems Engineering Research Conference. Nashville, Tennessee. June, 2015. Ed. S. Cetinkaya, J.K. Ryan. Nashville, Tenn.: n.p., Web. *