| Title | Authors | Year | Citation | |
|---|---|---|---|---|
| Numerical Simulation of the Interfacial Oxygen Transport Resistance for a PEMFC Cathode Incorporating Water Droplet Coverage | Koz, M. Kandlikar, S. G. | 2012 | ECS Transactions, 50(2), pp. 183-196 | C163 |
| A Preliminary Study for 3D Numerical Simulation of a Through-Plane Temperature Profile in a PEMFC Incorporating Coolant channels | Koz, M. Kandlikar, S. G. | 2012 | ICNMM2012-73182, Proceedings of the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, July 8-12, Rio Grande, Puerto Rico | C162 |
| Pool Boiling of FC-87 over Microchannel Surfaces at Atmospheric Pressure | Kalani, A. Kandlikar, S. G. | 2012 | IMECE2012-86186, Proceedings of the ASME 2012 10th International Mechanical Engineering Congress and Exposition, November 9-15, Houston, Texas, USA | C161 |
| Heat Transfer Enhancement During Pool Boiling Of Water Over Horizontal And Vertical Tubes With Micro Structured Surfaces | Mehta, J. S. Kandlikar, S. G. | 2012 | ICNMM2012-73175, Proceedings of the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, July 8-12, Rio Grande, Puerto Rico | C160 |
| Pool Boiling Heat Transfer over Microchannel Surfaces With Ethanol at Atmospheric Pressure | Kalani, A. Kandlikar, S. G. | 2012 | ICNMM2012-73188, Proceedings of the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels, July 8-12, Rio Grande, Puerto Rico | C159 |
| Effect of Channel Material on the Behavior of Water Droplet Emerging from the GDL into the PEMFC Gas Channels | Gopalan, P. Kandlikar, S. G. | 2012 | ECS Transactions, 50(2), pp. 503-512 | C158 |
| A Two-Phase Pressure Drop Model Incorporating Local Water Balance in PEM Fuel Cell Gas Channels | See, E. J. Kandlikar, S. G. | 2012 | ECS Transactions, 50(2), pp. 99-111 | C157 |
| Micro/Nano Hierarchical Structure in Microchannel Heat Sink for Boiling Enhancement | Yao, Z. Lu, Y-W. Kandlikar, S. G. | 2012 | 25th International Conference on Micro Electro Mechanical Systems, Paris, France | C156 |
| Invited Speaker: An Experimental Investigation of Structured Roughness on Heat Transfer During Single Phase Liquid flow at Microscale | Lin, T. Y. Kandlikar, S. G. | 2011 | Proceedings of the 3rd Micro and Nano Flows Conference, August 22-24, Thessaloniki, Greece | C155 |
| Keynote Talk: Challenges of High Heat Flux Removal with Single-Phase and Flow Boiling Heat Transfer | Kandlikar, S. G. | 2011 | International Forum on Frontier Theories of Thermal Science, December 18-20, Beijing, China | C154 |
| A Numerical Study to Predict the Effects of Structured Roughness Elements on Pressure Drop and Heat Transfer Enhancement in Minichannels and Microchannels | Dharaiya, V. V. Kandlikar, S. G. | 2011 | IMECE2011-65262, Proceedings of the ASME 2011 International Mechanical Engineering Congress and Exposition: Energy and Water Scarcity, November 11-17, Denver, CO, USA | C153 |
| Cooling Mechanisms in 3D ICs: Thermo-Mechanical Perspective | Kandlikar, S. G. Kudithipudi, D. Rubio-Jimenez, C. A. | 2011 | 2011 International Green Computing Conference and Workshops (IGCC), July 25-28, IEEE, Orlando, FL, USA | C152 |
| Thermal Management Considerations in the Design of an Experimental Fuel Cell with Material Evaluation | See, E. J. Banerjee, R. Daino, M. M. Sergi, J. M. Owejan, J. P. Gagliargo, J. J. Kandlikar, S. G. | 2011 | EFC11237, Proceedings of European Fuel Cell - Piero Lunghi Conference and Exhibition, December 14-16, Rome, Italy | C151 |
| Effect of Channel Geometry on Two-Phase Flow Structure in Fuel Cell Gas Channels | Rath, C. D. Kandlikar, S. G. | 2011 | ICNMM2011-58102, Proceedings of the ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, Edmonton, Canada, June 19-22 2011 | C150 |
| Investigation of Water Droplet Interaction with the Sidewalls of the Gas Channel in a PEM Fuel Cell in the Presence of Gas Flow | Gopalan, P. Kandlikar, S. G. | 2011 | ECS Transactions, Volume 41, Issue 1, pp. 479-488 | C149 |
| Gas Diffusion Layer Material Degradation Mechanisms and Their Effect on Water Breakthrough Dynamics in Proton Exchange Membrane Fuel Cells | Garofalo, M. L. Kandlikar, S. G. | 2011 | EFC11239, Proceedings of European Fuel Cell - Piero Lunghi Conference and Exhibition, December 14-16, Rome, Italy | C148 |
| Advances in Digital Microstructure Generation of PEMFC GDL with Localized Binder and PTFE Distributions | Daino, M. M. Kandlikar, S. G. | 2011 | EFC11275, Proceedings of European Fuel Cell - Piero Lunghi Conference and Exhibition, December 14-16, Rome, Italy | C147 |
| An Experimental Investigation on Heat Transfer Characteristics of Air and CO2 in Microtubes | Chen, C-W. Yang, C-Y. Lin, T-Y. Kandlikar, S. G. | 2011 | ICNMM2011-58102, Proceedings of the ASME 2011 9th International Conference on Nanochannels, Microchannels, and Minichannels, Edmonton, Canada, June 19-22 2011 | C146 |
| Effect of Temperature on the In-Plane Permeability in the Gas Diffusion Layer of a PEM Fuel Cell | Banerjee, R. Kandlikar, S. G. | 2011 | ECS Transactions, Volume 41, Issue 1, pp. 489-497 | C145 |
| Effective Thermal Conductivity of Gas Diffusion Layers Used in PEMFC: Measured with Guarded-Hot-Plate Method and Predicted by a Fractal Model | Radhakrishnan, A. Lu, Z. Kandlikar, S. G. | 2010 | ECS Transactions, Volume 33, Issue 1, pp. 1163-1176 | C144 |
| Nanoscale Surface Modification Techniques for Pool Boiling Enhancement - A Critical Review and Future Directions | Lu, Y-W. Kandlikar, S. G. | 2010 | FEDSM-ICNMM2010-30170, Proceedings of the ASME 2010 3rd Joint US-European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels, and Minichannels, Montreal, Canada, August 1-5, 2010 | C143 |
| History, Advances, and Challenges in Liquid Flow and Flow Boiling Heat Transfer in Microchannels: A Critical Review | Kandlikar, S. G. | 2010 | IHTC14-23353, Proceedings of the 14th International Heat Transfer Conference, Washington, DC, USA, August 8-13, 2010 | C142 |
| Through-Plane Water Transport Visualization in an Operating PEM Fuel Cell by Visible and Infrared Imaging | Daino, M. M. Lu, Z. LaManna, J. M. Owejan, J. P. Trabold, T. A. Kandlikar, S. G. | 2010 | ECS Transactions, Volume 33, Issue 1, pp. 1423-1433 | C141 |
| Pool boiling heat transfer and bubble dynamics over plain and enhanced microchannels | Cooke, D. Kandlikar, S. G. | 2010 | Third joint US - European Fluids Engineering Summer Meeting and 8th International Conference on Nanochannels, Microchannels and Minichannels | C140 |
| Numerical Investigation of Heat Transfer Effects in Microchannels under H2 Boundary Condition | Dharaiya, V. V. Srivastava, R. R. Kandlikar, S. G. | 2010 | IHTC14-23118, 14th International Heat Transfer Conference, Washington, DC, USA, August 8-13, 2010 | C139 |
| A Scale Analysis Based Theoretical Force Balance Model for Critical Heat Flux (CHF) During Saturated Flow Boiling in Microchannels and Minichannels | Kandlikar, S. G. | 2009 | MNHMT2009-18549, Proceedings of the ASME 2009 2nd Micro/Nanoscale Heat and Mass Transfer International Conference, Shanghai, China, December 18-21, 2009 | C138 |
| Natural Patterns Applied to the Design of Microchannel Heat Sinks | Rubio-Jimenez, C. A. Rubio-Arana, J. C. Hernandez-Guerrero, A. Kandlikar, S. G. | 2009 | ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, USA, November 13-19, 2009 | C137 |
| Mathematical Model for Fluid Flow in Artificially Roughened Microchannels | Wagner, R. N. Kandlikar, S. G. | 2009 | ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, USA, November 13-19, 2009. | C136 |
| Investigation of Water Vapor Diffusivity Through GDL of a PEMFC | LaManna, J. Kandlikar, S. G. | 2009 | ASME International Mechanical Engineering Congress and Exposition, Lake Buena Vista, Florida, USA, November 13-19, 2009 | C135 |
| Evaluation of a Tapered Header Configuration to Reduce Flow Maldistribution in Minichannels and Micrachammels | Dharaiya, V. V. Radhakrishnan, A. Kandlikar, S. G. | 2009 | Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June 22-24, 2009. | C134 |
| Cooling of Microelectronic Devices Packaged in a Single Chip Module using Single Phase Refrigerant R-123 | Pasupuleti, P. Kandlikar, S. G. | 2009 | Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June 22-24, 2009 | C133 |
| Evaluation of imaging techniques applied to water management research in PEMFCs | Daino, M. M. Kandlikar, S. G. | 2009 | Seventh International ASME Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June 22-24, 2009 | C132 |
| In Situ Characterization of Two-Phase Flow in Cathode Channels of an Operating PEM Fuel Cell with Visual Access | Sergi, J. M. Lu, Z. Kandlikar, S. G. | 2009 | ASME 2009 7th International Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June 22-24, 2009 | C131 |
| Numerical Simulation of Single Phase Liquid Flow in Narrow Rectangular Channels with Structured Roughness Walls | Srivastava, R. R. Schneider, N. M. Kandlikar, S. G. | 2009 | ASME 2009 7th International Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June 22-24, 2009 | C130 |
| Measurement of Heat Transfer in the Entrance Region of Small Diameter Tubes | Lin, T. Y. Yang, C. Y. Kandlikar, S. G. | 2009 | ASME 2009 7th International Conference on Nanochannels, Microchannels and Minichannels, Pohang, South Korea, June 22-24, 2009 | C129 |
| Simulation of Heat and Mass Transport in Gas Flow Streams of a PEMFC from Water Management Perspective | LaManna, J. Underhill, R. Kandlikar, S.G. | 2008 | Nineteenth International Symposium on Transport Phenomena, Reykjavik, Iceland, August 17-20, 2008 | C128 |
| Two-Phase Flow Considerations in PEMFC Design and Operation | Owejan, J.P. Gaglioardo, J.J Sergi, J.M. Trabol, T.A. | 2008 | ICNMM2008-62037, Sixth International Conference on Nanochannels, Microchannels and Minichannels, Darmstadt, Germany, June 23-25, 2008. | C127a |
| Effects of Roughness on Turbulent Flow in Microchannels and Minichannels | Brachbill, T.P. Kandlikar, S.G. | 2008 | ICNMM08-62224, Sixth International Conference on Nanochannels, Microchannels and Minichannels, Darmstadt, Germany, June 23-25, 2008. | C127 |
| A Critical Review of Water Transport Models in Cas Diffusion Media of PEM Fuel Cell | LaManna, J. Kandlikar, S.G. | 2008 | ICNMM08-62201, Sixth International Conference on Nanochannels, Microchannels and Minichannels, Darmstadt, Germany, June 23-25, 2008. | C126 |
| Investigation Of Water Transport In An Ex-Situ Experimental Facility Modeled On An Actual DOE Automotive Target Compliment Fuel Cell | Lu, Z. White, A. D. Pelaez, J. Hardbarger, M. Domigan, W. Sergi, J. Kandlikar, S. G. | 2008 | ICNMM2008-62200, Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels held in Darmstadt, Germany, June 23-25, 2008. | C125 |
| Surface Roughness Effects on Heat Transfer in Microscale Single Phase Flow: A Critical Review | Young, P.L. Kandlikar, S.G. | 2008 | ICNMM08-62192, Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels held in Darmstadt, Germany, June 23-25, 2008. | C124 |
| Investigation of Fouling and its Mitigation in Silicon Microchannels | Young, P.L. Kandlikar, S.G. | 2008 | ICNMM2008-62038, Proceedings of the Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels held in Darmstadt, Germany, June 23-25, 2008. | C123 |
| Current Status and Fundamental Research Needs In Thermal Management within a PEMFC Stack | Kandlikar, S. G. Lu, Z. Trabold, T. | 2007 | Keynote Paper, 10th UK Heat Transfer Conference, Edinburgh,September 10-12, 2007. | C122 |
| A Roadmap For Implementing Minichannels In Refrigeration And Air-Conditioning Systems- Current Status And Future Directions | Kandlikar, S. G. | 2007 | Heat Transfer Engineering, 28-12, p.973-985. | C121 |
| Effect Of Non Uniform Flow Distribution On Single Phase Heat Transfer In Parallel Microchannels | Bapat, A.V. Kandlikar, S.G. | 2007 | 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007 | C120 |
| Effects of Flow Field and Diffusion Layer Properties on Water Accumulation in a PEM Fuel Cell | Owejan, J.P. Trabol, T.A. Jacobson, D.L. Arif, M. Kandlikar, S.G. | 2007 | 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, pp 401-408, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007 | C119 |
| Effects of Freezing and Thawing on the Structures of Porous Gas Diffusion Media | Pelaez, J.A. Kandlikar, S.G. | 2007 | 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007,pp.401-408, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007 | C118 |
| Estimating Roughness Parameters Resulting from Various Machining Techniques for Fluid Flow Application | Young, P.L. Brackbill, T.P. Kandlikar, S.G. | 2007 | 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, v 2007 B,pp.827-836. Cited 1 time. Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007 | C117 |
| Effects of Low Uniform Relative Roughness on Single-Phase Friction Factors in Microchannels and Minichannels | Brackbill, T.P. Kandlikar, S.G. | 2007 | 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, pp.509-518. Cited 1 time, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007 | C116 |
| A Review of Models For Water Droplet Detachment from the Gas Diffusion Layer-Gas Flow Channel Interface in PEMFC's | Schillberg, C.H. Kandlikar, S.G. | 2007 | 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, pp. 299-310, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007 | C115 |
| Further Evaluation of a Flow Boiling Correlation For Microchannels and Minichannels | Peters, J.V.S. Kandlikar, S.G. | 2007 | 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, pp 11-17. v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007 | C114 |
| Numerical Study of Effecct of Contact Angle on Bubble Growth and Wall Heat Transfer During Flow Boiling of Water in a Microchannel | Mukherjee, A. Kandlikar, S.G. | 2006 | 13th International Heat Transfer Conference, Sydney, Austrailia, August 13-18, 2006 | C113 |
| Single-Phase Liquid Friction Factors In Microchannels | Steinke, M.E. Kandlikar, S.G. | 2006 | Stienke, M. E., Kandlikar, S.G., International; Journal of Thermal Sciences 45, (11), pp 1073-1083. | C112 |
| A Numerical Analysis Of Growing Water Droplet Inside Air Supply Channel Of A PEM Fuel Cell | Mukherjee, A. Kandlikar, S.G. | 2006 | American Society of Mechnical Engineers, Fluid Engineering Division, (Publication) FED | C111 |
| Critical Heat Flux Measurement And Model For Refrigerant-123 Under Stabalized Flow Conditions In Microchannels | Kuan, W.K. Kandlikar, S.G. | 2006 | American Society of Mechnical Engineers, Heat Transfer Division, (Publication) HTD | C110 |
| Investigation of Fouling in Microchannels | Perry, J.L. Kandlikar, S.G. | 2006 | 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 B, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 837-845 | C109 |
| Thermohydraulic Performance Analysis of Offset Strip Fin Microchannel Heat Exchangers | Bapat, A.V. Kandlikar, S.G. | 2006 | 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 A, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 347-354 | C108 |
| Single-Phase Liquid Heat Transfer in Plain and Enhanced Microchannels | Steinke, M.E. Kandlikar, S.G. | 2006 | 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 B, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 943-951 | C107 |
| A Review of Manufacturing Processes for Microchannel Heat Exchanger Fabrication | Ashman, S. Kandlikar, S.G. | 2006 | 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 B, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 855-860 | C106 |
| Effect of Triangular Roughness Elements on Pressure Drop and Laminar-Turbulent Transition in Microchannels and Minichannels | Brackbill, T.P. Kandlikar, S.G. | 2006 | 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 B, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 747-755 | C105 |
| Numerical Study of the Effect of Surface Tension on Vapor Bubble Growth During Flow Boiling in Microchannels | Mukherjee, A. Kandlikar, S.G. | 2006 | 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 A, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 61-66 | C104 |
| Experimental Study on the Effect of Stabilization on Flow Boiling Heat Transfer in Microchannels | Kuan, W.K. Kandlikar, S.G. | 2006 | 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 A, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 53-60 | C103 |
| Experimental Study on Saturated Flow Boiling Critical Heat Flux in Microchannels | Kuan, W.K. Kandlikar, S.G. | 2006 | 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 A, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 45-52 | C102 |
| Development Of An Intrumented Glass Microchannel Device For Critical Heat Flux Visualization And Studies | Jain, A. Borca-Tasciuc, T. Roday, A. P. Jensen, M. K. Kandlikar, S.G. | 2005 | Annual IEEE Semiconductor Thermal Measurement And Management Symposium, pp.26-30 | C101 |
| Extending The Heat Flux Limit With Enhanced Microchannels In Direct Single-Phase Cooling Of Computer Chips | Kandlikar, S. G. Upadhye, H.R. | 2005 | Annual IEEE Semiconductor Thermal Measurement And Management Symposium, pp.8-15 | C100 |
| Development Of An Experimental Facility For Investigating Critical Heat Flux of saturated Flow Boiling Of Refrigerant-123 In Microchannels | Kuan, W.K. Kandlikar, S.G. | 2005 | American Society of Mechnical Engineers, Heat Transfer Division, (Publication) HTD 376 HTD (2), pp. 221-226 | C099 |
| A Numerical Analysis Of Vapor Bubble Growth And Wall Heat Transfer During Flow Boiling Of Water In A Microchannel | Mukherjee, A. Kandlikar, S. G. | 2005 | American Society of Mechnical Engineers, Heat Transfer Division, (Publication) HTD 376 HTD (2), pp. 221-226 | C098 |
| High flux heat removal with microchannels - A roadmap of challenges and opportunities | Kandlikar, S. G. | 2005 | 3rd International Conference on Microchannels and Minichannels, 2005, v PART A, Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005, 2005, p 59-68 | C097 |
| Single-phase liquid friction factors in microchannels | Steinke, M. E. Kandlikar, S. G. | 2005 | 3rd International Conference on Microchannels and Minichannels, 2005, v PART A, Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005, 2005, p 291-303 | C096 |
| Review of fabrication of nanochannels for single phase liquid flow | Jeffrey L. P. Kandlikar, S.G. | 2005 | 3rd International Conference on Microchannels and Minichannels, 2005, v PART B, Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005, 2005, p 441-448. | C095 |
| Numerical Simulation of Flow Through Microchannels in Bipolar Plate | Rawool, A. S. Mitra, S. K. Agrawal, A. Kandlikar, S. G. | 2005 | Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005). | C094 |
| Experimental Evaluation of Pressure Drop Elements and Fabricated Nucleation Sites for Stabilizing Flow Boiling in Minichannels and Microchannels | Kandlikar, S. G. Willistein, D. A. Borrelli, J. | 2005 | Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005). | C093 |
| Numerical Study of the Effect of Inlet Constriction on Bubble Growth During Flow Boiling in Microchannels | Mukherjee, A. Kandlikar, S. G. | 2005 | Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005). | C092 |
| Water Transport Visualization and Two-Phase Pressure Drop Measurements in a Simulated PEMFC Cathode Minichannel | Borrelli, J. Kandlikar, S. G. Trabold, T. Owejon, J. | 2005 | Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005). | C091 |
| Single-Phase Liquid Heat Transfer in Microchannels | Steinke, M. E. Kandlikar, S. G. | 2005 | Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005). | C090 |
| Single-Phase Liquid Friction Factors in Microchannels | Steinke, M. E. Kandlikar, S. G. | 2005 | Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005). | C089 |
| Effects of Repeating Microstructures on Pressure Drop in Rectangular Minichannels | Schmitt, D. J. Kandlikar, S. G. | 2005 | Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005). | C088 |
| An Experimental Investigation into the Effect of Surfactants on Air-Water Two-Phase Flow in Minichannels | English, N. J. Kandlikar, S. G. | 2005 | Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005). | C087 |
| Review of Fabrication of Nanochannels for Single Phase Liquid Flow | Perry, J. L. Kandlikar, S. G. | 2005 | Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005). | C086 |
| High Heat Flux Removal with Microchannels - A Roadmap of Challenges and Opportunities | Kandlikar, S. G. | 2005 | third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005). | C085 |
| Characterization of the Effect of Surface Roughness and Texture on Fluid Flow: Past, Present, and Future | Taylor, J. B. Carrano, A. L. Kandlikar, S. G. | 2005 | Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005). | C084 |
| Development of an Experimental Facility for Investigating Single-Phase Investigating | Steinke, M. E. Kandlikar, S. G. Magerlein, J. H. Colgan, E. Raisanen, A. D. | 2005 | Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005). | C083 |
| Technology Status and Design Overview of a Hybrid Fuel Cell Engine for a Motorcycle | English, N. J. Shah, R. K. | 2004 | Second International Conference on Fuel Cell Science, Engineering and Technology, ASME Publications (2004). | C082 |
| Effect of Dynamic Contact Angle on Single Bubbles During Nucleate Pool Boiling | Mukherjee, A. Kandlikar, S.G. | 2004 | IMECE2004-59976, ASME International Mechanical Engineering Congress and Exposition, Anaheim, CA, USA, November 13-20, 2004 | C081 |
| Numerical Study of an Evaporating Meniscus on a Moving Heated Surface | Mukherjee, A. Kandlikar, S. G. | 2004 | ASME Heat Transfer/Fluids Engineering Summer Conference, July 11-15, 2004, Charlotte, North Carolina USA ASME Publications (2004). | C080 |
| Single-Phase Heat Transfer Enhancement Techniques in Microchannel and Minichannel Flows. | Steinke, M. E. Kandlikar, S. G. | 2004 | Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004). | C079 |
| Numerical Simulation of Growth of a Vapor Bubble During Flow Boiling of Water in a Microchannel. | Mukherjee, A. Kandlikar, S. G. | 2004 | Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004). | C078 |
| Evaluation of Single Phase Flow in Microchannels for High Flux Chip Cooling - Thermohydraulic Performance Enhancement and Fabrication Technology. | Kandlikar, S. G. Grande, W. J. | 2004 | Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004). | C077 |
| Effect of Gravitational Orientation on Flow Boiling of Water in 1054 X 197 Micron Parallel Minichannels. | Kandlikar, S. G. Balasubramanian | 2004 | Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004). | C076 |
| Optimization of Microchannel Geometry for Direct Chip Cooling Using Single Phase Heat Transfer. | Upadhye, H. R. Kandlikar, S. G. | 2004 | Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004). | C075 |
| Experimental Study of Heat Transfer, Pressure Drop, and Dryout for Flow Boiling of Water in an Oil Heated Minichannel. | Campbell, L. A. Kandlikar, S. G. | 2004 | Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004). | C074 |
| Effect of Entrance Condition on Frictional Losses and Transition to Turbulence in Minichannel Flows. | Campbell, L. A. Kandlikar, S. G. | 2004 | Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004). | C073 |
| Experimental Study of Flow Patterns, Pressure Drop and Flow Instabilities in Parallel Rectangular Minichannels. | Balasubramanian, P. Kandlikar, S. G. | 2004 | Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004). | C072 |
| Comparison of Flow Patterns During Flow Boiling in Single (Dh = 333 µm) and Parallel Rectangular Channels (Dh = 207 µm) | Balasubramanium, P. Kandlikar, S.G. | 2003 | IMECE2003-42089, ASME International Mechanical Engineering Congress, Washington, D.C., November 15-21, 2003. | C071a |
| Flow Boiling and Pressure Drop in Parallel Flow Microchannels | Steinke, M. E. Kandlikar, S. G. | 2003 | Proceedings of 1st International Conference on Minichannels and Microchannels April 24-25, 2003 Rochester, NY Paper 1070 . ASME Publications (2003): 567-587 | C071 |
| Examples of Microchannel Mass Transfer Processes in Biological Systems | Kandlikar, S. G. Steinke, M. E. | 2003 | Proceedings of 1st International Conference on Minichannels and Microchannels April 24-25, 2003 Rochester, NY Paper 1124 . ASME Publications (2003). | C070 |
| Extending the Applicability of the Flow Boiling Correlation to Low Reynolds Number Flows In Microchannels. | Kandlikar, S.G. Balasubramaniam, P. | 2003 | ICMM2003-1074, 1st International Conference on Microchannels and Minichannels, ASME Publications (2003), Rochester, NY, April 24-25, 2003. | C069 |
| Critical Heat Flux in Microchannels: Experimental Issues and Guidelines for Measurement. | Kandlikar, S.G. Bergles, A.E. | 2003 | ICMM2003-1016, 1st International Conference on Microchannels and Minichannels, ASME Publications (2003), Rochester, NY, April 24-25, 2003. | C068 |
| Heat Transfer Mechanisms During Flow Boiling In Microchannels. | Kandlikar, S.G. | 2003 | ICMM2003-1005, 1st International Conference on Microchannels and Minichannels, ASME Publications (2003), Rochester, NY, April 24-25, 2003 | C067 |
| Microchannels and Minichannels – History, Terminology, Classification and Current Research Needs. | Kandlikar, S.G. | 2003 | ICMM2003-1000, 1st International Conference On Microchannels and Minichannels, ASME Publications (2003), Rochester, NY, April 24-25, 2003 | C066 |
| Heat Transfer from a Moving and Evaporating Meniscus on a Heated Surface | Kandlikar, S. G. Kuan, W. K. | 2003 | Source Summer Heat Transfer Conference July 21-23, 2003, Las Vegas, Nevada, USA HT2003-47449, ASME Publications, 2003. | C065 |
| High Speed Photographic Observation of Flow Patterns During Flow boiling in Single Rectangular Minichannel | Kandlikar, S. G. Balasubramanian, P. | 2003 | Source Summer Heat Transfer Conference July 21-23, 2003, Las Vegas, Nevada, USA HT2003-47175, ASME Publications, 2003. | C064 |
| Flow Boiling In Microchannels: Non-Dimensional Groups and Heat Transfer Mechanisms. | Kandlikar, S. G. | 2003 | Thermique et Microtechnologies Proceedings of congres de la societe Francais de la Thermique 2003, Editors P. Marty, A. Bontemps, S. LePerson And F. Ayela, June 3-6, 2003, pp 3-21 | C063 |
| Transient Thermal Analysis of a Microprocessor Using a Heat Spreader with Variable Thermal Storage Characteristics | Steinke, M.E. Kandlikar, S.G. | 2002 | 1st Proceedings of International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics, Kruger Park, South Africa, April 8-10, 2002. | C062 |
| Flow Boiling Heat Transfer Coefficient in Minichannels - Correlation and Trends | Kandlikar, S. G. Steinke, M. E. | 2002 | Proceedings of 12th International Heat Transfer Conference, Aug 2002, Grenoble, France, Paper # 1178, 2002. | C061 |
| Computer Simulated Transient Analysis of a Polyimide V-Groove Leg Actuator with Serpentine Heater for a Walking Micro-Robot | Khire, R. A. Kandlikar, S. G. Walter, W. W. | 2002 | Paper presented at the First World Congress on Biomimetics and Artificial Muscles Albuquerque, New Mexico, Dec. 9-11. | C060 |
| Single-Phase Flow Characteristics and Effect of Dissolved Gases on Heat Transfer Near Saturation Conditions in Microchannels | Kandlikar, S. G Steinke, M. E. Balasubramanian, P. | 2002 | Proceedings of International Mechanical Engineering Congress and Exposition 2002, New Orleans, Nov. 17-21, ASME. | C059 |
| Effect of Entrance Condition on Frictional Losses and Transition to Turbulence | Kandlikar, S. G. Campbell, L. | 2002 | Paper No. IMECE2002-39573, International Mechanical Engineering Conference and Exposition 2002, New Orleans, Nov. 17-21, ASME. | C058 |
| Evolution of Microchannel Flow Passages - Thermohydraulic Performance and Fabrication Technology | Kandlikar, S. G. Grande, W. J. | 2002 | Paper No. IMECE2002-32043, International Mechanical Engineering Conference and Exposition 2002, New Orleans, Nov. 17-21, ASME, Also being published in Heat Transfer Engineering, Vol. 25, No. 1, Jan. 2003. | C057 |
| Insight Into Mechanisms and Review of Available Models for Critical Heat Flux (CHF) in Pool Boiling | Kandlikar, S. G. | 2002 | Keynote Lecture KS1, to appear in the 1st Proceedings of International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics 8-10 April 2002, Kruger Park, South Africa. | C056 |
| Effects of Weber Number and Surface Temperature on the Boiling and Spreading Characteristics of Impinging Water Droplets | Kandlikar, S. G. Steinke, M. E. Singh, A. | 2001 | 35th Proceedings of National Heat Transfer Conference, June 2001, Anaheim, CA. Paper # NHTC01-11672. ASME Publications, 2001. | C055 |
| High-Speed Photographic Observation of Flow Boiling of Water in Parallel Minichannels | Kandlikar, S. G. Steinke, M. E. Tian, S. Campbell, L. A. | 2001 | 35th Proceedings of National Heat Transfer Conference, June 2001, Anaheim,CA. Paper # NHTC01-11262. ASME Publications. | C054 |
| Molecular Dynamics Simulation and Measurement of Contact Angle of Water Droplet on a Platinum Surface | Kandlikar, S. G. Steinke, M. E. Maruyama, S. Kimura, T. | 2001 | ASME Proceedings of International Mechanical Engineering Congress and Exposition, Nov. 2001, Paper #IMECE01-2832, New York, NY. | C053 |
| High Speed Photographic Investigation of Liquid-Vapor Interface and Contact Line Movement During CHF and Transition Boiling | Kandlikar, S. G. Steinke, M. E. | 2001 | Proceedings of International Mechanical Engineering Congress and Exposition, Nov. 2001, New York, NY. | C052 |
| Two-Phase Flow Patterns, Pressure Drop, and Heat Transfer, During Flow Boiling in Minichannel Flow Passages of Compact Heat Evaporators | Kandlikar, S. G. | 2001 | Heat Transfer Engineering, Vol. 23, No. 5, 5-23, December 2001. | C051 |
| A Photographic Insight into the Motion of Liquid-Vapor Interface During Rapid Evaporation of a Liquid Droplet on a Heated Surface | Kandlikar, S. G. | 2001 | Paper presented at the ASME IMECE 2001, Paper #IMECE01, New York, NY. | C050 |
| Fundamental Issues Related to Flow Boiling in Minichannels and Microchannels | Kandlikar, S. G. | 2001 | Keynote Lecture presented at the International Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics Conference, Thessaloniki, Greece, September 2001. Also published in Experimental Thermal and Fluid Science, Vol. 26, pp. 389-407, 2002. | C049 |
| Effect of Channel Roughness on Heat Transfer and Fluid Flow Characteristics at Low Reynolds Numbers in Small Diameter Tubes | Kandlikar, S. G. Joshi, S. Tian, S. | 2001 | Presentation at the ASME National Heat Transfer Conference, Los Angeles, CA, June 10-12, 2001. | C048 |
| Contact Angle Of Droplets During Spread and Recoil After Impinging on a Heated Surface | Kandlikar, S. G. Steinke, M. | 2001 | IchemE Chemical Engineering Research and Design, April 2001. | C047 |
| Microscale Heat Transfer, Flow Boiling in Microchannels | Keynote Speaker | 2000 | 2000 IAMS International Seminar on Thermal Design and Management for Electronic Equipment and Material Processing, Institute of Advanced Material Study, Kyushu University, Kasuga, Japan, October 10-11, 2000. | C046 |
| Understanding Thermal and Hydrodynamic Mechanisms Leading to CHF in Pool Boiling | Keynote Speaker | 2000 | International Workshop on Current Status and Future Directions in Boiling Heat Transfer and Two-Phase Flow, Organized by M. Ozawa, S.G. Kandlikar and Y. Fujita, and M. Shoji, Kansai University, Osaka, Japan, October 5-6, 2000. | C045 |
| The Effects of Flow Rate and Sodium Laurel Sulfate Surfactant Concentration on Single- and Two-Phase Heat Transfer Characteristics in a Microchannel | M. S. June Kandlikar, S. G. | 2000 | Paper presented at the NHTC 2000 conference in Pittsburgh, August 2000. | C044 |
| Flow Boiling Heat Transfer with Binary and Ternary Mixtures in Microfin Tubes | Inoue, N. Goto, M. Kandlikar, S. G. | 2000 | Paper presented at the ASME IMECE 2000, Orlando, Advances in Enhanced Heat Transfer, HTD-Vol. 365, PID-Vol. 4, pp. 23-34. | C043 |
| Critical Heat Flux in Subcooled Flow Boiling - An Assessment of Current Understanding and Future Directions for Research | Kandlikar, S. G. | 2000 | Proceedings of the Engineering Foundation Conference, Anchorage, Alaska, April 30-May 5, 2000. | C042 |
| Correlating Evaporation Heat Transfer Coefficient of Refrigerant R-134a in a Plate Heat Exchanger | Donowski, V. D. Kandlikar, S. G. | 2000 | Donowski, V.D., and Kandlikar, S.G., 2000, "Correlating Evaporation Heat Transfer Coefficient of Refrigerant R-134a in a Plate Heat Exchanger." Paper presented at the Engineering Foundation Conference on Pool and Flow Boiling, April, Alaska, May 2000. | C041 |
| A Theoretical Model To Predict Pool Boiling CHF Incorporating Effects Of Contact Angle And Orientation | Kandlikar, S. G. | 2000 | Paper presented at the ASME National Heat Transfer Conference 2000, Session on Fundamentals of CHF in Pool and Flow Boiling, Pittsburgh. Also accepted for publication in ASME Journal of Heat Transfer. | C040 |
| Further Assessment of Pool and Flow Boiling Heat Transfer with Binary Mixtures | Kandlikar, S. G. Tian, S. Yu, J. Koyama, S. | 1999 | Two-Phase Flow Modelling and Experimentation 1999, Proceedings of the 2nd International Symposium on Two-phase Flow Modeling and Experimentation, Pisa, Italy, May 23-26, 1999, Eds. Celata, G.P., Di Marco, P., and Shah, R.K., pp. 197-204. | C039 |
| Convective Heat Transfer of Binary Mixtures Under Flow Boiling Conditions | McAssey, E. V., Jr. Kandlikar, S. G. | 1999 | Two-Phase Flow Modelling and Experimentation 1999, Proceedings of the 2nd International Symposium on Two-phase Flow Modeling and Experimentation, Pisa, Italy, May 23-26, 1999, Eds. Celata, G.P., Di Marco, P., and Shah, R.K., pp. 271-278. | C038 |
| An Experimental Investigation on Flow Boiling Performance of Enhanced Surfaces with Laser Drilled Holes | Kandlikar, S. G. Fogarty, R. | 1999 | Paper presented at the Engineering Foundation Conference on Compact Heat Exchangers and Enhancement Technology for Process Industries, July 18-23. | C037 |
| An Experimental Investigation on Flow Boiling of Ethylene-Glycol/Water Mixture | Kandlikar, S. G. Bulut, M. | 1999 | Paper presented at the 1999 National Heat Transfer Conference at Albuquerque, August, 1999. | C036 |
| Boiling Heat Transfer with Binary Mixtures | Kandlikar, S. G. | 1998 | Keynote Speech at the 35th Heat Transfer Symposium of Japan, Nagoya, May 28. | C035 |
| Effect of Surface Finish on Flow Boiling Heat Transfer | Kandlikar, S. G. Spiesman, P. | 1998 | Paper presented at the ASME IMECE98 Meeting at Anaheim, CA, Nov. 15-20. | C034 |
| Bubble Nucleation and Growth Characteristics in Subcooled Flow Boiling of Water | Kandlikar, S. G. Mizo, V. R. Cartwright, M. D. Ikenze | 1997 | HTD-Vol. 342, ASME Proceedings of the 32nd National Heat Transfer Conference, Vol. 4, pp.11-18. | C033 |
| Effect of Surface Characteristics on Flow Boiling Heat Transfer | Kandlikar, S. G. Spiesman, P. H. | 1997 | Paper presented at the Engineering Foundation conference on Convective and Pool Boiling, Irsee, Germany, May 18-25. | C032 |
| Investigating the Effect of Heating Method on Pool Boiling Heat Transfer | Kandlikar, S. G. Lombardo, M. | 1997 | Paper presented at the Engineering Foundation conference on Convective and Pool Boiling, Irsee, Germany, May 18-25. | C031 |
| Bubble Characteristics and Convective Effects in the Flow Boiling Heat Transfer of Binary Mixtures | Kandlikar, S. G. Raykoff, T. | 1997 | Paper presented at the Engineering Foundation conference on Convective and Pool Boiling, Irsee, Germany, May 18-25. | C030 |
| Further Developments in Subcooled Flow Boiling Heat Transfer | Kandlikar, S. G. | 1997 | Paper presented at the Engineering Foundation conference on Convective and Pool Boiling, Irsee, Germany, May 18-25. | C029 |
| Artwork - A Review of Research Work Done by Professor Arthur (Art) E. Bergles | Kandlikar, S. G. | 1996 | Plenary Paper presented at the Symposium on Process, Enhanced, and Multiphase Heat Transfer, Atlanta, GA. | C028 |
| Predicting Flow Boiling Heat Transfer of Refrigerants in Microfin Tubes | Kandlikar, S. G. Raykoff, T. | 1996 | Proceedings of the Second European Thermal-Sciences and 14th UIT National Heat Transfer Conference, Rome, Italy, May 29-31, Eds. Celata, G.P., DiMarco, P., and Mariani, A., Vol. 1, pp. 241-246. | C027 |
| Investigation of Nucleation Characteristics and Heat Transfer on Microfin Surfaces | kandlikar, S. G. Howell, M. J. | 1996 | Proceedings of the Second European Thermal-Sciences and 14th UIT National Heat Transfer Conference, Rome, Italy, May 29-31, Eds. Celata, G.P., DiMarco, P., and Mariani, A., Vol. 1, pp. 241-246. | C026 |
| Transient Performance of Parallel and Counter-flow Heat Exchangers with a Step Temperature Change on Minimum Capacity Rate Fluid Stream | Kandlikar, S. G. Bunce, D. J. Cole, B. D. | 1995 | Paper presented at the Symposium on Thermal Science and Engineering in Honor of Chancellor Chang-Lien Tien, University of California, Berkeley, November 14. | C025 |
| Bubble Nucleation, Growth and Departure in Flow Boiling | Kandlikar, S. G. | 1995 | Paper presented at the Society of Engineering Sciences Conference, Nov., New Orleans. | C024 |
| Transient Response of Heat Exchangers | Bunce, D. J. Kandlikar, S. G. | 1995 | Heat and Mass Transfer 95, Proceedings of the Second ISHMT-ASME Heat and Mass Transfer Conference, Mangalore, India, Dec. 28-31, Surathkal, India. | C023 |
| Investigation of Bubble Departure Mechanism in Subcooled Flow Boiling of Water Using High-Speed Photography | Kandlikar, S. G. Carwright, M. D. Mizo, V. R. | 1995 | Convective Flow Boiling, Proceedings of Convective Flow Boiling, An International Conference held at the Banff Center for Conferences, Banff, Alberta, Canada, April 30-May 5, Taylor and Francis, pp. 161-166. | C022 |
| A Photographic Study of Nucleation Characteristics of Cavities in Flow Boiling | Kandlikar, S. G. Carwright, M. D. Mizo, V. R. | 1995 | Proceedings of Convective Flow Boiling, An International Conference held at the Banff Center for Conferences, Banff, Alberta, Canada, April 30-May 5, Taylor and Francis, pp. 73-78. | C021 |
| Bubble Behavior and Departure Bubble Diameter of Bubbles Generated Over Nucleating Cavities in Flow Boiling | Kandlikar, S. G. | 1992 | Pool and External Flow Boiling, Eds. V. K. Dhir and A. E. Bergles, Proceedings of the Engineering Foundaton Conference, Santa Barbara, CA, March 22-27, 1992. | C020 |
| Correlating Heat Transfer Data in Binary Systems | Kandlikar, S. G. | 1991 | Paper presented at the National Heat Transfer Conference, July, Minneapolis; Phase Change Heat Transfer, Eds. Hensel, E., Dhir, V.K., Greif, R., and Fillo, J., HTD-Vol. 159, pp. 163-170, ASME. | C019 |
| Heat Transfer and Pressure Drop Characteristics of Magnet Winding During Cooldown with Flow Boiling of LN2 | Kandlikar, S. G. Pisera, J. Kytomaa, H. K. Thome, R. J. | 1991 | Paper presented at the Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Dubrovnik, Yugoslavia, August 1991. | C018 |
| Development of a Flow Boiling Map for Subcooled and Saturated Flow Boiling of Different Fluids in Circular Tubes | Kandlikar, S. G. | 1991 | Heat Transfer with Phase Change, Habib, I.S. et al., eds., ASME HTD-Vol. 114, pp. 51-62, 1990. Also published in Transactions of ASME, Journal of Heat Transfer, Vol. 113, pp. 190-200, 1991. | C017 |
| A Model for Flow Boiling Heat Transfer in Augmented Tubes and Compact Evaporators | Kandlikar, S. G. | 1990 | Paper presented at the 1990 ASME Winter Annual Meeting, Dallas, Nov. 25-30, 1990. | C016 |
| Flow Boiling Maps for Water, R-22 and R-134a in the Saturated Region | Kandlikar, S. G. | 1990 | Kandlikar, S. G., "Flow Boiling Maps for Water, R-22 and R-134a in the Saturated Region", paper presented at the 9th International Heat Transfer Conference, Jerusalem, August, 1990. | C015 |
| A Mechanistic Model for Flow Boiling Heat Transfer | Kandlikar, S. G. | 1990 | " Paper presented at the 1990 ASME Winter Annual Meeting, Dallas, Nov. 1990. | C014 |
| A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes | Kandlikar, S. G. | 1990 | Journal of Heat Transfer, Vol. 112, pp. 219-228, 1990. | C013 |
| Asymptotic Effectiveness - NTU Formulas for Multipass Plate Heat Exchangers | Shah, R. K. Kandlikar, S. G. | 1989 | Journal of Heat Transfer, Vol. 111, pp. 314-321, 1989. | C012 |
| Thermal Design Theory for Compact Evaporators | Kandlikar, S. G. | 1989 | Journal of Heat Transfer, Vol. 111, pp. 314-321, 1989. | C011 |
| Multipass Plate Heat Exchangers -- Effectiveness-NTU Results and Guidelines for Selecting Pass Arrangements | Shah, R. K. Kandlikar, S. G. | 1989 | Journal of Heat Transfer, Vol. 111, pp. 300-313, 1989. | C010 |
| Instabilities In an R-11 Thermosiphon Loop with Applications in Microelectronic Chip Cooling | Kandlikar, S. G. Habsberg, S. | 1989 | Paper presented at the ASME Winter Annual Meeting, San Francisco, Dec. 1989. | C009 |
| The Influence of the Number of Thermal Plates on Plate Heat Exchanger Performance | Shah, R. K. Kandlikar, S. G. | 1988 | Special volume to honor Dr. Ramachandran at National Heat Transfer Conference, India, 1988. | C008 |
| A Parametric Study of Saturated Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes | Kandlikar, S. G. | 1988 | Experimental Fluid Mechanics, Heat Transfer and Thermodynamics, Shah, R.K., Ganic, E.N., and Yang, K.T., editors, Hemisphere Publishing Corp, Washington, 1988. | C007 |
| A New Correlation for Heat Transfer During Flow Boiling | Kandlikar, S. G. Thakur, B. K. | 1982 | Paper presented at the 16th Southeastern Seminar on Thermal Sciences, 1982. | C006 |
| Ice Growth in Rivers | Desmond, R. M. Karlekar, B. V. Kandlikar, S. G. | 1981 | International Symposium on Ice, Quebec City, 1981. | C005 |
| Selection of Working Fluid for Low Temperature Thermal Power Cycles | Kandlekar, S. G. Jaganmohan, A. | 1978 | National Solar Energy Conference, Bhavnagar, India, 1978. | C004 |
| Geometrical Aspects of a Cylindrical Parabolic Collector Operated with Intermittent Tracking | Kandlikar, S. G. Vij, S. K. | 1978 | In SUN, Mankind's Future Source of Energy, Proceedings of the International Solar Energy Society Congress, eds. De Winter, F. and Cox, M., pp. 1254-1258, 1978. | C003 |
| Predicting Thermodynamic Properties of Aqua-ammonia Mixtures | Kandlikar, S. G. | 1976 | Presented at the 5th National Symposium on Refrigeration and Airconditioning, Madras, 1976. | C002 |
| Binary Annular Two-phase Flow with Mixture Refrigerants | Kandlikar, S. G. Sukhatme, S. P. | 1975 | Presented at the third National Conference, Bombay, India, 1975. | C001 |
Last updated 05.24.2010