Conference Papers

PDF

Title

Authors

Year

Citation

C128


Simulation of Heat and Mass Transport in Gas Flow Streams of a PEMFC from Water Management Perspective


LaManna, J.
Underhill, R.
Kandlikar, S. G.

2008

LaManna, J., Underhill, R., Kandlikar, S.G., submitted to the Nineteenth International Symposium on Transport Phenomena, Reykjavik, Iceland, 2008.

C127

Effects of Roughness on Turbulent Flow in Microchannels and Minichannels

Brachbill, Timothy P.
Kandlikar, Satish G.

2008

LaManna, J., Kandlikar, S.G., ICNMM08-62224, Sixth International Conference on Nanochannels, Microchannels and Minichannels, Darmstadt, Germany, June 23-25, 2008.

C126

A Critical Review of Water Transport Models in Cas Diffusion Media of PEM Fuel Cell

LaManna, Jacob
Kandlikar, Satish G.

2008

LaManna, J., Kandlikar, S.G., ICNMM08-62201, Sixth International Conference on Nanochannels, Microchannels and Minichannels, Darmstadt, Germany, June 23-25, 2008.

C125

Investigation Of Water Transport In An Ex-Situ Experimental Facility Modeled On An Actual DOE Automotive Target Compliment Fuel Cell


Lu, Z.
White, A. D.
Pelaez, J.
Hardbarger, M.
Domigan, W.
Sergi, J.
Kandlikar, S. G.


2008

Lu, Z., White, A.D., Pelaez, J., Hardbarger, M., Domigan, W., Sergi, J., Kandlikar, S.G., ICNMM2008-62200, Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels held in Darmstadt, Germany, June 23-25, 2008.

C124


Surface Roughness Effects on Heat Transfer in Microscale Single Phase Flow: A Critical Review


Young, Perry L.
Kandlikar, Satish G.

2008

Young, Perry L., Kandlikar, S.G., ICNMM08-62192, Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels held in Darmstadt, Germany, June 23-25, 2008.

C123

Investigation of Fouling and its Mitigation in Silicon Microchannels

Perry, Jeffrey L.
Kandlikar, Satish G.

2008


Perry, Jeffrey L., Kandlikar, S.G., ICNMM2008-62038, Proceedings of the Sixth International ASME Conference on Nanochannels, Microchannels and Minichannels held in Darmstadt, Germany, June 23-25, 2008.


C122

Current Status and Fundamental Research Needs In Thermal Management within a PEMFC Stack

 

Kandlikar, S.G.

Lu, Z.

Trabold, T.

2007

Kandlikars, S. G. , Lu, Z., Trabold, T., Keynote Paper, 10th UK Heat Transfer Conference, Edinburgh,September 10-12, 2007.

C121

A Roadmap For Implementing Minichannels In Refrigeration And Air-Conditioning Systems- Current Status And Future Directions

 

Kandlikar, S. G.

2007

Kandlikars, S. G. Heat Transfer Engineering, 28 (12), p.973-985.

C120

Message From The Conference Chairs

 

Kandlikar, S. G.

Mazzoco, R. R.

2007

Kandlikar,, S. G. Mazzoco, R. R. Proceedings of the 5th International Conference on Nanochannels, Microchannels, and Minichannels, ICNMM2007,.

C119

Effect Of Non Uniform Flow Distribution On Single Phase Heat Transfer In Parallel

Microchannels

 

Bapat, Akhilesh V.

Kandlikar, Satish G.

2007

Bapat, Akhilesh V. Kandlikar, Satish G. Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007

C118

 

Effects of Flow Field and Diffusion Layer Properties on Water Accumulation in a PEM Fuel Cell

Owejan, J.P.

Trabol, T.A.

Jacobson, D.L.

Arif, M.

Kandlikar, Satish G.

2007

Owejan, J.P. Trabol, T.A. Jacobson, D.L. Arif, M. Kandlikar, Satish G. Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, pp 401-408, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007

C117

Effects of Freezing and Thawing on the Structures of Porous Gas Diffusion Media

Pelaez, Joaquin A.

Kandlikar, Satish G.

2007

Pelaez, Joaquin A. Kandlikar, Satish G. Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007,pp.401-408, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007

C116

Estimating Roughness Parameters Resulting from Various Machining Techniques for Fluid Flow Application

Young, Perry L.

Brackbill, Timothy P

Kandlikar, Satish G.

2007

Young, Perry L. Brackbill, Timothy P. Kandlikar, Satish G. Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, v 2007 B,pp.827-836. Cited 1 time. Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007

C115

Effects of Low Uniform Relative Roughness on Single-Phase Friction Factors in Microchannels and Minichannels

Brackbill, Timothy P

Kandlikar, Satish G.

2007

Brackbill, Timothy P. Kandlikar, Satish G. Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, pp.509-518. Cited 1 time, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007

C114

A Review of Models For Water Droplet Detachment from the Gas Diffusion Layer-Gas Flow Channel Interface in PEMFC's

Schillberg, Charles H

Kandlikar, Satish G.

2007

Schillberg, Charles H. Kandlikar, Satish G. Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, pp. 299-310, v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007

C113

Further Evaluation of a Flow Boiling Correlation For Microchannels and Minichannels

 

 

Peters, Julian V.S.

Kandlikar, Satish G.

2007

Peters, Julian V.S. Kandlikar, Satish G. Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, pp 11-17. v 2007 B, Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2007, 2007

C112

Single-Phase Liquid Friction Factors In Microchannels

 

Steinke, M. E.

Kandlikar, S. G.

2006

Stienke, M. E., Kandlikar, S.G., International; Journal of Thermal Sciences 45, (11), pp 1073-1083.

C111

A Numerical Analysis Of Growing Water Droplet Inside Air Supply Channel Of A PEM Fuel Cell

 

Mukherjee, A.

Kandlikar, S. G.

2006

Mukherjee, A. Kandlikar, S.G., American Society of Mechnical Engineers, Fluid Engineering Division, (Publication) FED

C110

Critical Heat Flux Measurement And Model For Refrigerant-123 Under Stabalized Flow Conditions In Microchannels

 

Kuan, W. K.

Kandlikar, S. G.

2006

Kuan, W.K., Kandlikar, S.G., American Society of Mechnical Engineers, Heat Transfer Division, (Publication) HTD

C109

Investigation of Fouling in Microchannels

Perry, Jeffrey L. Kandlikar, Satish G.

2006

Perry, Jeffrey L. Kandlikar, Satish G. Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 B, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 837-845

C108

Thermohydraulic Performance Analysis of Offset Strip Fin Microchannel Heat Exchangers

Bapat, Akhilesh V. Kandlikar, Satish G.

2006

Bapat, Akhilesh V. Kandlikar, Satish G. Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 A, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 347-354

C107

Single-Phase Liquid Heat Transfer in Plain and Enhanced Microchannels

Steinke, Mark E.

Kandlikar, Satish G.

2006

Steinke, Mark E. Kandlikar, Satish G. Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 B, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 943-951

C106

A Review of Manufacturing Processes for Microchannel Heat Exchanger Fabrication

Ashman, Sean

Kandlikar, Satish G.

2006

Ashman, Sean Kandlikar, Satish G. Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 B, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 855-860

C105

Effect of Triangular Roughness Elements on Pressure Drop and Laminar-Turbulent Transition in Microchannels and

Minichannels

Brackbill, Timothy P

Kandlikar, Satish G.

2006

Brackbill, Timothy P. Kandlikar, Satish G. Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 B, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 747-755

C104

Numerical Study of the Effect of Surface Tension on Vapor Bubble Growth During Flow Boiling in Microchannels

Mukherjee, Abhijit

Kandlikar, Satish G.

2006

Mukherjee, Abhijit Kandlikar, Satish G. Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 A, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 61-66

C103

Experimental Study on the Effect of Stabilization on Flow Boiling Heat Transfer in Microchannels

Wai, Keat Kuan

Kandlikar, Satish G.

2006

Kuan, Wai Keat Kandlikar, Satish G. Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 A, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 53-60

C102

Experimental Study on Saturated Flow Boiling Critical Heat Flux in Microchannels

Wai, Keat Kuan

Kandlikar, Satish G.

2006

Wai, Keat Kuan Kandlikar, Satish G. Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, v 2006 A, Proceedings of the 4th International Conference on Nanochannels, Microchannels and Minichannels, ICNMM2006, 2006, p 45-52

C101

Development Of An Intrumented Glass Microchannel Device For Critical Heat Flux Visualization And Studies

 

Jain, A.

Borca-Tasciuc, T.
Roday, A. P.
Jensen, M. K.
Kandlikar, S. G.

2005

Jain, A., Borca-Tasciuc, T., Roday, A.P., Jensen, M. K., Kandlikar, S. G., Annual IEEE Semiconductor Thermal Measurement And Management Symposium, pp.26-30

C100

Extending The Heat Flux Limit With Enhanced Microchannels In Direct Single-Phase Cooling Of Computer Chips

 

Kandlikar, S. G.,

Upadhye, H. R.

2005

Kandlikar, S. G., Upadhye, H. R., Annual IEEE Semiconductor Thermal Measurement And Management Symposium, pp.8-15

C099

DevelopmentOf An Experimental Facility For Investigating Critical Heat Flux of saturated Flow Boiling Of Refrigerant-123 In Microchannels

 

Kuan, W. K.

Kandlikar, S. G.

2005

Kuan, W.K., Kandlikar, S.G., American Society of Mechnical Engineers, Heat Transfer Division, (Publication) HTD 376 HTD (2), pp. 221-226

C098

A Numerical Analysis Of Vapor Bubble Growth And Wall Heat Transfer During Flow Boiling Of Water In A Microchannel

 

Mukherjee, A.

Kandlikar, S. G.

2005

Mukherjee, A. Kandlikar, S.G., American Society of Mechnical Engineers, Heat Transfer Division, (Publication) HTD 376 HTD (2), pp. 221-226

C097

High flux heat removal with microchannels - A roadmap of challenges and opportunities

Kandlikar, S. G.

2005

Kandlikar, S. G. Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005, v PART A, Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005, 2005, p 59-68

C096

Single-phase liquid friction factors in microchannels

Steinke, M. E., Kandlikar, S. G.

2005

Steinke, M. E. Kandlikar, S. G. Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005, v PART A, Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005, 2005, p 291-303

C095

Review of fabrication of nanochannels for single phase liquid flow

 

Jeffrey L. Perry, Satish G. Kandlikar

2005

Jeffrey L. Perry, Satish G. Kandlikar, "Review of fabrication of nanochannels for single phase liquid flow." Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005, v PART B, Proceedings of the 3rd International Conference on Microchannels and Minichannels, 2005, 2005, p 441-448.

C094

Numerical Simulation of Flow Through Microchannels in Bipolar Plate

Rawool, A. S., Mitra, S. K., Agrawal, A., Kandlikar, S. G.

2005

Rawool, A. S., Mitra, S. K., Agrawal, A. and Kandlikar, S. G. "Numerical Simulation of Flow Through Microchannels in Bipolar Plate." Proceedings of the Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).

C093

Experimental Evaluation of Pressure Drop Elements and Fabricated Nucleation Sites for Stabilizing Flow Boiling in Minichannels and Microchannels

Kandlikar, S. G., Willistein, D. A., Borrelli, J.

2005

Kandlikar, S. G., Willistein, D. A. and Borrelli, J. "Experimental Evaluation of Pressure Drop Elements and Fabricated Nucleation Sites for Stabilizing Flow Boiling in Minichannels and Microchannels." Proceedings of the Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).

C092

Numerical Study of the Effect of Inlet Constriction on Bubble Growth During Flow Boiling in Microchannels

Mukherjee, A., Kandlikar, S. G.

2005

Mukherjee, A. and Kandlikar, S. G. "Numerical Study of the Effect of Inlet Constriction on Bubble Growth During Flow Boiling in Microchannels." Proceedings of the Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).

C091

Water Transport Visualization and Two-Phase Pressure Drop Measurements in a Simulated PEMFC Cathode Minichannel

Borrelli, J., Kandlikar, S. G., Trabold, T., Owejon, J.

2005

Borrelli, J., Kandlikar, S. G., Trabold, T. and Owejon, J. "Water Transport Visualization and Two-Phase Pressure Drop Measurements in a Simulated PEMFC Cathode Minichannel" Proceedings of the Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).

C090

Single-Phase Liquid Heat Transfer in Microchannels

Steinke, M. E., Kandlikar, S. G.

2005

Steinke, M. E. and Kandlikar, S. G. "Single-Phase Liquid Heat Transfer in Microchannels." Proceedings of the Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).

C089

Single-Phase Liquid Friction Factors in Microchannels

Steinke, M. E., Kandlikar, S. G.

2005

Steinke, M. E. and Kandlikar, S. G. "Single-Phase Liquid Friction Factors in Microchannels." Proceedings of the Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).

C088

Effects of Repeating Microstructures on Pressure Drop in Rectangular Minichannels

Schmitt, D. J., Kandlikar, S. G.

2005

Schmitt, D. J. and Kandlikar, S. G. "Effects of Repeating Microstructures on Pressure Drop in Rectangular Minichannels." Proceedings of the Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).

C087

An Experimental Investigation into the Effect of Surfactants on Air-Water Two-Phase Flow in Minichannels

English, N. J., Kandlikar, S. G.

2005

English, N. J. and Kandlikar, S. G. "An Experimental Investigation into the Effect of Surfactants on Air-Water Two-Phase Flow in Minichannels." Proceedings of the Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).

C086

Review of Fabrication of Nanochannels for Single Phase Liquid Flow

Perry, J. L., Kandlikar, S. G.

2005

Perry, J. L. and Kandlikar, S. G. "Review of Fabrication of Nanochannels for Single Phase Liquid Flow." Proceedings of the Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).

C085

High Heat Flux Removal with Microchannels - A Roadmap of Challenges and Opportunities

Kandlikar, S. G.

2005

Kandlikar, S. G. "High Heat Flux Removal with Microchannels - A Roadmap of Challenges and Opportunities." Proceedings of the Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).

C084

Characterization of the Effect of Surface Roughness and Texture on Fluid Flow: Past, Present, and Future

Taylor, J. B., Carrano, A. L., Kandlikar, S. G.

2005

Taylor, J. B., Carrano, A. L. and Kandlikar, S. G. "Characterization of the Effect of Surface Roughness and Texture on Fluid Flow: Past, Present, and Future." Proceedings of the Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).

C083

Development of an Experimental Facility for Investigating Single-Phase Investigating

Steinke, M. E., Kandlikar, S. G., Magerlein, J. H., Colgan, E., Raisanen, A. D.

2005

Steinke, M. E., Kandlikar, S. G., Magerlein, J. H., Colgan, E. and Raisanen, A. D. "Development of an Experimental Facility for Investigating Single-Phase Investigating." Proceedings of the Third International Conference on Microchannels and Minichannels, June 13-15, 2005, Toronto, Ontario, Canada ASME Publications (2005).

C082

Technology Status and Design Overview of a Hybrid Fuel Cell Engine for a Motorcycle

English, N. J., Shah, R. K.

2004

English, N. J. and Shah, R. K. "Technology Status and Design Overview of a Hybrid Fuel Cell Engine for a Motorcycle." Proceedings of the Second International Conference on Fuel Cell Science, Engineering and Technology, ASME Publications (2004).

C081

Numerical Study of an Evaporating Meniscus on a Moving Heated Surface

Mukherjee, A.,  Kandlikar, S. G.

2004

Mukherjee, A. and Kandlikar, S.G. "Numerical Study of an Evaporating Meniscus on a Moving Heated Surface." ASME Heat Transfer/Fluids Engineering Summer Conference, July 11-15, 2004, Charlotte, North Carolina USA ASME Publications (2004).

C080

Single-Phase Heat Transfer Enhancement Techniques in Microchannel and Minichannel Flows.

Steinke, M. E.,  Kandlikar, S. G.

2004

Steinke, M.E. and Kandlikar, S.G. "Single-Phase Heat Transfer Enhancement Techniques in Microchannel and Minichannel Flows." Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).

C079

Numerical Simulation of Growth of a Vapor Bubble During Flow Boiling of Water in a Microchannel.

Mukherjee, A.,  Kandlikar, S. G.

2004

Mukherjee, A. and Kandlikar, S.G. "Numerical Simulation of Growth of a Vapor Bubble During Flow Boiling of Water in a Microchannel." Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).

C078

Evaluation of Single Phase Flow in Microchannels for High Flux Chip Cooling - Thermohydraulic Performance Enhancement and Fabrication Technology.

Kandlikar, S. G.,  Grande, W. J. 

2004

Kandlikar, S.G. and Grande, W.J. "Evaluation of Single Phase Flow in Microchannels for High Flux Chip Cooling - Thermohydraulic Performance Enhancement and Fabrication Technology." Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).

C077

Effect of Gravitational Orientation on Flow Boiling of Water in 1054 X 197 Micron Parallel Minichannels.

Kandlikar, S. G.,  Balasubramanian, P.

2004

Kandlikar, S.G. and Balasubramanian, P. "Effect of Gravitational Orientation on Flow Boiling of Water in 1054 X 197 Micron Parallel Minichannels." Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).

C076

Optimization of Microchannel Geometry for Direct Chip Cooling Using Single Phase Heat Transfer.

Upadhye, H. R.,  Kandlikar, S. G.

2004

Upadhye, H.R. and Kandlikar, S.G. "Optimization of Microchannel Geometry for Direct Chip Cooling Using Single Phase Heat Transfer." Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).

C075

Experimental Study of Heat Transfer, Pressure Drop, and Dryout for Flow Boiling of Water in an Oil Heated Minichannel.

Campbell, L. A.,  Kandlikar, S. G.

2004

Campbell, L.A. and Kandlikar, S.G. "Experimental Study of Heat Transfer, Pressure Drop, and Dryout for Flow Boiling of Water in an Oil Heated Minichannel." Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).

C074

Effect of Entrance Condition on Frictional Losses and Transition to Turbulence in Minichannel Flows.

Campbell, L. A.,  Kandlikar, S. G.

2004

Campbell, L.A. and Kandlikar, S.G. "Effect of Entrance Condition on Frictional Losses and Transition to Turbulence in Minichannel Flows." Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).

C073

An Experimental Study of Flow Patterns, Pressure Drop and Flow Instabilities in Parallel Rectangular Minichannels.

Balasubramanian, P.,  Kandlikar, S. G.

2004

Balasubramanian, P., and Kandlikar, S.G. "An Experimental Study of Flow Patterns, Pressure Drop and Flow Instabilities in Parallel Rectangular Minichannels." Proceedings of the Second International Conference on Microchannels and Minichannels, June 17-19, 2004, Rochester, NY USA ASME Publications (2004).

C071

Flow Boiling and Pressure Drop in Parallel Flow Microchannels

Steinke, M. E.,  Kandlikar, S. G.

2003

Steinke, M.E., and S.G. Kandlikar. "Flow Boiling and Pressure Drop in Parallel Flow Microchannels." Proceedings of 1st International Conference on Minichannels and Microchannels April 24-25, 2003 Rochester, NY Paper 1070 . ASME Publications (2003): 567-587

C070

Examples of Microchannel Mass Transfer Processes in Biological Systems

Kandlikar, S. G., Steinke, M. E.

2003

Kandlikar, S.G., and M.E. Steinke. "Examples of Microchannel Mass Transfer Processes in Biological Systems." Proceedings of 1st International Conference on Minichannels and Microchannels April 24-25, 2003 Rochester, NY Paper 1124 . ASME Publications (2003).

C069

Heat Transfer from a Moving and Evaporating Meniscus on a Heated Surface

Kandlikar, S. G.,  Kuan, W. K.

2003

Kandlikar, S.G. and Wai, K.K., 2003 "Heat Transfer From a Moving and Evaporating Meniscus On a Heated Surface"  Source Summer Heat Transfer Conference July 21-23, 2003, Las Vegas, Nevada, USA  HT2003-47449, ASME Publications, 2003.

C068

High Speed Photographic Observation of Flow Patterns During Flow boiling in Single Rectangular Minichannel

Kandlikar, S. G.,  Balasubramanian, P.

2003

Kandlikar, S.G. and Balasubramanian, P., 2003 "High Speed Photographic Observation of Flow Patterns During Flow boiling in Single Rectangular Minichannel"  Source Summer Heat Transfer Conference July 21-23, 2003, Las Vegas, Nevada, USA  HT2003-47175, ASME Publications, 2003.

C067

Flow Boiling In Microchannels: Non-Dimensional Groups and Heat Transfer Mechanisms.

Kandlikar, S. G. 

2003

Kandlikar S.G., 2003,"Flow Boiling In Microchannels: Non-Dimensional Groups and Heat Transfer Mechanisms." Thermique et Microtechnologies Proceedings of congres de la societe Francais de la Thermique 2003, Editors P. Marty, A. Bontemps, S. LePerson And F. Ayela, June 3-6, 2003, pp 3-21

C066

Extending the Applicability of the Flow Boiling Correlation to Low Reynolds Number Flows In Microchannels.

Kandlikar, S. G.,  Balasubramanian, P.

2003

Kandlikar, S.G. and Balasubramanian, P., 2003 "Extending the Applicability of the Flow Boiling Correlation to Low Reynolds Number Flows in Microchannels." Source First International Conference on Microchannels and Minichannels April 24-25, 2003, Rochester, New York, USA ICMM2003-1074, S.G. Kandlikar, Editor ASME Publication, 2003.

C065

Critical Heat Flux in Microchannels: Experimental Issues and Guidelines for Measurement.

Kandlikar, S. G.,  Bergles, A. E. 

2003

Kandlikar, S.G. and Bergles A.E., 2003 "Critical Heat Flux in Microchannels: Experimental Issues and Guidelines for Measurement." Source First International Conference on Microchannels and Minichannels April 24-25, 2003, Rochester, New York, USA ICMM2003-1016, S.G. Kandlikar, Editor ASME Publication, 2003.

C064

Heat Transfer Mechanisms During Flow Boiling In Microchannels.

Kandlikar, S. G.

2003

Kandlikar, S.G., 2003 "Heat Transfer Mechanisms During Flow Boiling in Microchannels." Source First International Conference on Microchannels and Minichannels April 24-25, 2003, Rochester, New York, USA ICMM2003-1005, S.G. Kandlikar, Editor ASME Publication, 2003.

C063

Microchannels and Minichannels - History, Terminology, Classification and Current Research Needs.

Kandlikar, S. G.

2003

Kandlikar, S.G., 2003 "Microchannels and Minichannels - History, Terminology, Classification and Current Research Needs." Source First International Conference On Microchannels and Minichannels April 24-25, 2003, Rochester, New York, USA ICMM2003-1000, S.G. Kandlikar,Editor ASME Publication, 2003.

C062

Transient Thermal Analysis of a Microprocessor Using a Heat Spreader with Variable Thermal Storage Characteristics

Steinke, M. E.,  Kandlikar, S. G.

2002

Steinke, M.E., and S.G. Kandlikar. "Transient Thermal Analysis of a Microprocessor Using a Heat Spreader with Variable Thermal Storage Characteristics."  1st Proceedings of International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics 8-10 April 2002, Kruger Park, South Africa, April, 2002.

C061

Single-Phase Flow Characteristics and Effect of Dissolved Gases on Heat Transfer Near Saturation Conditions in Microchannels

Kandlikar, S. G.,  Steinke, M. E.,  Balasubramanian, P.

2002

Kandlikar, S.G., M.E. Steinke, P. Balasubramanian. "Single-Phase Flow Characteristics and Effect of Dissolved Gases on Heat Transfer Near Saturation Conditions in Microchannels." Proceedings of International Mechanical Engineering Congress and Exposition 2002, New Orleans, Nov. 17-21, ASME.

C060

Flow Boiling Heat Transfer Coefficient in Minichannels - Correlation and Trends

Kandlikar, S. G.,  Steinke, M. E.

2002

Kandlikar, S.G., and M.E. Steinke. "Flow Boiling Heat Transfer Coefficient in Minichannels - Correlation and Trends." Proceedings of 12th International Heat Transfer Conference, Aug 2002, Grenoble, France, Paper # 1178, 2002.

C059

Computer Simulated Transient Analysis of a Polyimide V-Groove Leg Actuator with Serpentine Heater for a Walking Micro-Robot

Khire, R. A.,  Kandlikar, S. G.,  Walter, W. W.

2002

Khire, R.A., Kandlikar, S.G., and Walter, W.W., 2002,  "Computer Simulated Transient Analysis of a Polyimide V-Groove Leg Actuator with Serpentine Heater for a Walking Micro-Robot," Paper presented at the First World Congress on Biomimetics and Artificial Muscles Albuquerque, New Mexico, Dec. 9-11.

C058

Effect of Entrance Condition on Frictional Losses and Transition to Turbulence

Kandlikar, S. G.,  Campbell, L.

2002

Kandlikar, S.G., Campbell, L., 2002, "Effect of Entrance Condition on Frictional Losses and Transition to Turbulence," Paper No. IMECE2002-39573, International Mechanical Engineering Conference and Exposition 2002, New Orleans, Nov. 17-21, ASME.

C057

Evolution of Microchannel Flow Passages - Thermohydraulic Performance and Fabrication Technology

Kandlikar, S. G.,  Grande, W. J.

2002

Kandlikar, S.G., and Grande, W.J., 2002, "Evolution of Microchannel Flow Passages - Thermohydraulic Performance and Fabrication Technology," Paper No. IMECE2002-32043, International Mechanical Engineering Conference and Exposition 2002, New Orleans, Nov. 17-21, ASME, Also being published in Heat Transfer Engineering, Vol. 25, No. 1, Jan. 2003.

C056

Insight Into Mechanisms and Review of Available Models for Critical Heat Flux (CHF) in Pool Boiling

Kandlikar, S. G.

2002

Kandlikar, S. G., 2002, "Insight Into Mechanisms and Review of Available Models for Critical Heat Flux (CHF) In Pool Boiling," Keynote Lecture KS1, to appear in the 1st Proceedings of International Conference on Heat Transfer, Fluid Mechanics, and Thermodynamics 8-10 April 2002, Kruger Park, South Africa.

C055a

Contact angles of droplets during spread and recoil after impinging on a heated surface

Kandlikar, S.G.

Steinke, M.E.

2001

Kandlikar, S. G. Steinke, M.E.

C055

Effects of Weber Number and Surface Temperature on the Boiling and Spreading Characteristics of Impinging Water Droplets

Kandlikar, S. G.,  Steinke, M. E.,  Singh, A.

2001

Kandlikar, S.G., M.E. Steinke, and A. Singh."Effects of Weber Number and Surface Temperature on the Boiling and Spreading Characteristics of Impinging Water Droplets." 35th Proceedings of National Heat Transfer Conference, June 2001, Anaheim, CA. Paper # NHTC01-11672. ASME Publications, 2001.

C054

High-Speed Photographic Observation of Flow Boiling of Water in Parallel Minichannels

Kandlikar, S. G.,  Steinke, M. E.,   Tian, S.,      Campbell, L. A.

2001

Kandlikar, S.G., M.E. Steinke, S. Tian, and L.A. Campbell. "High-Speed Photographic Observation of Flow Boiling of Water in Parallel Minichannels." 35th Proceedings of National Heat Transfer Conference, June 2001, Anaheim,CA. Paper # NHTC01-11262. ASME Publications.

C053

Molecular Dynamics Simulation and Measurement of Contact Angle of Water Droplet on a Platinum Surface

Kandlikar, S. G.,  Steinke, M. E.,  Maruyama ,S.,  Kimura, T.

2001

Kandlikar, S.G., M.E. Steinke, S. Maruyama, and T. Kimura."Molecular Dynamics Simulation and Measurement of Contact Angle of Water Droplet on a Platinum Surface." ASME Proceedings of International Mechanical Engineering Congress and Exposition, Nov. 2001, Paper #IMECE01-2832, New York, NY.

C052

High Speed Photographic Investigation of Liquid-Vapor Interface and Contact Line Movement During CHF and Transition Boiling

Kandlikar, S. G.,  Steinke, M. E.

2001

Kandlikar, S.G., M.E. Steinke."High Speed Photographic Investigation of Liquid-Vapor Interface and Contact Line Movement During CHF and Transition Boiling." Proceedings of International Mechanical Engineering Congress and Exposition, Nov. 2001, New YorkNY.

C051

Two-Phase Flow Patterns, Pressure Drop, and Heat Transfer,  During Flow Boiling in Minichannel Flow Passages of Compact Heat Evaporators

Kandlikar, S. G.

2001

Kandlikar, S.G., 2001, "Two-Phase Flow Patterns, Pressure Drop, and Heat Transfer,  During Flow Boiling in Minichannel Flow Passages of Compact Heat Evaporators," Heat Transfer Engineering, Vol. 23, No. 5, 5-23, December 2001.

C050

A Photographic Insight into the Motion of Liquid-Vapor Interface During Rapid Evaporation of a Liquid Droplet on a Heated Surface

Kandlikar, S. G.

2001

Kandlikar, S.G., 2001, "A Photographic Insight into the Motion of Liquid-Vapor Interface During Rapid Evaporation of a Liquid Droplet on a Heated Surface," Paper presented at the ASME IMECE 2001, Paper #IMECE01, New York, NY.

C049

Fundamental Issues Related to Flow Boiling in Minichannels and Microchannels

Kandlikar, S. G.

2001

Kandlikar, S.G., 2001, "Fundamental Issues Related to Flow Boiling in Minichannels and Microchannels," Keynote Lecture presented at the International Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics Conference, Thessaloniki, Greece, September 2001.  Also published in Experimental Thermal and Fluid Science, Vol. 26, pp. 389-407, 2002.

C048

Effect of Channel Roughness on Heat Transfer and Fluid Flow Characteristics at Low Reynolds Numbers in Small Diameter Tubes

Kandlikar, S. G.,  Joshi, S.,            Tian

2001

Kandlikar, S.G., Joshi, S., and Tian, S., 2001, "Effect of Channel Roughness on Heat Transfer and Fluid Flow Characteristics at Low Reynolds Numbers in Small Diameter Tubes" paper submitted for presentation at the ASME National Heat Transfer Conference, Los Angeles, CA, June 10-12, 2001.

C047

Contact Angle Of Droplets During Spread and Recoil After Impinging on a Heated Surface

Kandlikar, S. G.,  Steinke, M.

2001

Kandlikar, S.G., and Steinke, M., 2001, "Contact Angle Of Droplets During Spread and Recoil After Impinging on a Heated Surface." IchemE  Chemical Engineering Research and Design, April 2001.

C046

 Microscale Heat Transfer, Flow Boiling in Microchannels

Keynote Speaker

2000

Keynote Speaker, Microscale Heat Transfer, Flow Boiling in Microchannels, 2000 IAMS International Seminar on Thermal Design and Management for Electronic Equipment and Material Processing, Institute of Advanced Material Study, Kyushu University, Kasuga, Japan, October 10-11, 2000.

C045

Understanding Thermal and Hydrodynamic Mechanisms Leading to CHF in Pool Boiling

Keynote Speaker

2000

Keynote Speaker, "Understanding Thermal and Hydrodynamic Mechanisms Leading to CHF in Pool Boiling," International Workshop on Current Status and Future Directions in Boiling Heat Transfer and Two-Phase Flow, Organized by M. Ozawa, S.G. Kandlikar and Y. Fujita, and M. Shoji, Kansai University, Osaka, Japan, October 5-6, 2000.

C044

The Effects of Flow Rate and Sodium Laurel Sulfate Surfactant Concentration on Single- and Two-Phase Heat Transfer Characteristics in a Microchannel

M. S. June,  Kandlikar, S. G.

2000

M.S. June, and Kandlikar, S.G., "The Effects of Flow Rate and Sodium Laurel Sulfate Surfactant Concentration on Single- and Two-Phase Heat Transfer Characteristics in a Microchannel," Paper to be presented at the NHTC 2000 conference in Pittsburgh, August 2000.

C043

Flow Boiling Heat Transfer with Binary and Ternary Mixtures in Microfin Tubes

Inoue, N., 
Goto, M.,    Kandlikar, S. G.

2000

Inoue, N., Goto, M., and Kandlikar, S.G., 2000, "Flow Boiling Heat Transfer with Binary and Ternary Mixtures in Microfin Tubes," Paper presented at the ASME IMECE 2000, Orlando, Advances in Enhanced Heat Transfer, HTD-Vol. 365, PID-Vol. 4, pp. 23-34. 

C042

Critical Heat Flux in Subcooled Flow Boiling - An Assessment of Current Understanding and Future Directions for Research

Kandlikar, S. G.

2000

Kandlikar, S.G., 2000, "Critical Heat Flux in Subcooled Flow Boiling - An Assessment of Current Understanding and Future Directions for Research," Keynote Lecture, Boiling 2000, Phenomena & Emerging Applications, Proceedings of the Engineering Foundation Conference, Anchorage, Alaska, April 30-May 5, 2000.

C041

Correlating Evaporation Heat Transfer Coefficient of Refrigerant R-134a in a Plate Heat Exchanger

Donowski, V. D.,  Kandlikar, S. G.

2000

Donowski, V.D., and Kandlikar, S.G., 2000, "Correlating Evaporation Heat Transfer Coefficient of Refrigerant R-134a in a Plate Heat Exchanger." Paper presented at the Engineering Foundation Conference on Pool and Flow Boiling, April, Alaska, May 2000.

C040

A Theoretical Model To Predict Pool Boiling CHF Incorporating Effects Of Contact Angle And Orientation

Kandlikar, S. G.

2000

Kandlikar, S.G., 2000, "A Theoretical Model To Predict Pool Boiling CHF Incorporating Effects Of Contact Angle And Orientation," Paper presented at the ASME National Heat Transfer Conference 2000, Session on Fundamentals of CHF in Pool and Flow Boiling, Pittsburgh.  Also accepted for publication in ASME Journal of Heat Transfer.

C039

Further Assessment of Pool and Flow Boiling Heat Transfer with Binary Mixtures

Kandlikar, S. G., Tian, S.,
Yu, J.,
Koyama, S.

1999

Kandlikar, S. G., Tian, S., Yu, J., and Koyama, S., 1999, "Further Assessment of Pool and Flow Boiling Heat Transfer with Binary Mixtures," Two-Phase Flow Modelling and Experimentation 1999, Proceedings of the 2nd International Symposium on Two-phase Flow Modeling and Experimentation, Pisa, Italy, May 23-26, 1999, Eds. Celata, G.P., Di Marco, P., and Shah, R.K., pp. 197-204.

C038

Convective Heat Transfer of Binary Mixtures Under Flow Boiling Conditions

McAssey, E. V., Jr.,  Kandlikar, S. G.

1999

McAssey E. V., Jr., and Kandlikar, S. G., 1999, "Convective Heat Transfer of Binary Mixtures Under Flow Boiling Conditions," Two-Phase Flow Modelling and Experimentation 1999, Proceedings of the 2nd International Symposium on Two-phase Flow Modeling and Experimentation, Pisa, Italy, May 23-26, 1999, Eds. Celata, G.P., Di Marco, P., and Shah, R.K., pp. 271-278.

C037

An Experimental Investigation on Flow Boiling Performance of Enhanced Surfaces with Laser Drilled Holes

Kandlikar, S. G.,  Fogarty, R.

1999

Kandlikar, S. G., and Fogarty,R., 1999, "An Experimental Investigation on Flow Boiling Performance of Enhanced Surfaces with Laser Drilled Holes," paper presented at the Engineering Foundation Conference on Compact Heat Exchangers and Enhancement Technology for Process Industries, July 18-23.

C036

An Experimental Investigation on Flow Boiling of Ethylene-Glycol/Water Mixture

Kandlikar, S. G.,  Bulut, M.

1999

Kandlikar, S.G., and Bulut, M., 1999, "An Experimental Investigation on Flow Boiling of Ethylene-Glycol/Water Mixture," Paper presented at the 1999 National Heat Transfer Conference at Albuquerque, August, 1999. 

C035

Boiling Heat Transfer with Binary Mixtures

Kandlikar, S. G.

1998

Kandlikar, S.G., 1998, "Boiling Heat Transfer with Binary Mixtures," Keynote Speech at the 35th  Heat Transfer Symposium of Japan, Nagoya, May 28. 

C034

Effect of Surface Finish on Flow Boiling Heat Transfer

Kandlikar, S. G., Spiesman, P.

1998

Kandlikar, S.G., and Spiesman, P., 1998, "Effect of Surface Finish on Flow Boiling Heat Transfer," Paper presented at the ASME IMECE98 Meeting at Anaheim, CA, Nov. 15-20. 

C033

Bubble Nucleation and Growth Characteristics in Subcooled Flow Boiling of Water

Kandlikar, S. G.,  Mizo, V. R.,  Cartwright, M. D.,  Ikenze

1997

Kandlikar, S. G., Mizo, V. R., Cartwright, M. D., Ikenze,1997, "Bubble Nucleation and Growth Characteristics in Subcooled Flow Boiling of Water," HTD-Vol. 342, ASME Proceedings of the 32nd National Heat Transfer Conference, Vol. 4, pp.11-18. 

C032

Effect of Surface Characteristics on Flow Boiling Heat Transfer

Kandlikar, S. G.,  Spiesman, P. H.

1997

Kandlikar, S. G., and Spiesman, P. H., "Effect of Surface Characteristics on Flow Boiling Heat Transfer," Paper presented at the Engineering Foundation conference on Convective and Pool Boiling, Irsee, Germany, May 18-25. 

C031

Investigating the Effect of Heating Method on Pool Boiling Heat Transfer

Kandlikar, S. G.,  Lombardo, M.

1997

Kandlikar, S. G., and Lombardo, M., "Investigating the Effect of Heating Method on Pool Boiling Heat Transfer,"  Paper  presented at the Engineering Foundation conference on Convective and Pool Boiling, Irsee, Germany, May 18-25.  

C030

Bubble Characteristics and Convective Effects in the Flow Boiling Heat Transfer of Binary Mixtures

Kandlikar, S. G.,  Raykoff, T.

1997

Kandlikar, S. G., and Raykoff, T., 1997, "Bubble Characteristics and Convective Effects in the Flow Boiling Heat Transfer of Binary Mixtures," Paper  presented at the Engineering Foundation conference on Convective and Pool Boiling, Irsee, Germany, May 18-25. 

C029

Further Developments in Subcooled Flow Boiling Heat Transfer

Kandlikar, S. G.

1997

Kandlikar, S. G., 1997, "Further Developments in Subcooled Flow Boiling Heat Transfer," Paper  presented at the Engineering Foundation conference on Convective and Pool Boiling, Irsee, Germany, May 18-25. 

C028

Artwork - A Review of Research Work Done by Professor Arthur (Art) E. Bergles

Kandlikar, S. G.

1996

Kandlikar, S.  G., 1996, "Artwork - A Review of Research Work Done by Professor Arthur (Art) E. Bergles," Plenary Paper presented at the Symposium on Process, Enhanced, and Multiphase Heat Transfer, Atlanta, GA. 

C027

Predicting Flow Boiling Heat Transfer of Refrigerants in Microfin Tubes

Kandlikar, S. G.,  Raykoff, T.

1996

Kandlikar, S. G., and Raykoff, T., 1996, "Predicting Flow Boiling Heat Transfer of Refrigerants in Microfin Tubes," Proceedings of the Second European Thermal-Sciences and 14th UIT National Heat Transfer Conference, Rome, Italy, May 29-31, Eds. Celata, G.P., DiMarco, P., and Mariani, A., Vol. 1, pp. 241-246.

C026

Investigation of Nucleation Characteristics and Heat Transfer on Microfin Surfaces

Kandlikar, S. G.,  Howell, M. J.

1996

Kandlikar, S. G., and Howell, M. J., 1996, "Investigation of Nucleation Characteristics and Heat Transfer on Microfin Surfaces," Proceedings of the Second European Thermal-Sciences and 14th UIT National Heat Transfer Conference, Rome, Italy, May 29-31, Eds. Celata, G.P., DiMarco, P., and Mariani, A., Vol. 1, pp. 241-246.

C025

Transient Performance of Parallel and Counter-flow Heat Exchangers with a Step Temperature Change on Minimum Capacity Rate Fluid Stream

Kandlikar, S. G.,  Bunce, D. J.,      Cole, B. D.

1995

Kandlikar, S. G., Bunce, D. J., and Cole, B. D., 1995, "Transient Performance of Parallel and Counter-flow Heat Exchangers with a Step Temperature Change on Minimum Capacity Rate Fluid Stream," Paper presented at the Symposium on Thermal Science and Engineering in Honor of Chancellor Chang-Lien Tien, University of California, Berkeley, November 14.

C024

Bubble Nucleation, Growth and Departure in Flow Boiling

Kandlikar, S. G.

1995

Kandlikar, S. G., 1995, "Bubble Nucleation, Growth and Departure in Flow Boiling," Paper presented at the Society of Engineering Sciences Conference, Nov., New Orleans

C023

Transient Response of Heat Exchangers

Bunce D. J.,  Kandlikar, S. G.

1995

Bunce D.J., and Kandlikar, S. G., 1995, "Transient Response of Heat Exchangers," Heat and Mass Transfer 95, Proceedings of the Second ISHMT-ASME Heat and Mass Transfer Conference, Mangalore, India, Dec. 28-31, Surathkal, India.

C022

Investigation of Bubble Departure Mechanism in Subcooled Flow Boiling of Water Using High-Speed Photography

Kandlikar, S. G.,  Cartwright, M. D.,  Mizo, V. R.

1995

Kandlikar, S. G., Mizo, V. R., and Cartwright, M. D., 1995, "Investigation of Bubble Departure Mechanism in Subcooled Flow Boiling of Water Using High-Speed Photography," Convective Flow Boiling, Proceedings of Convective Flow Boiling, An International Conference held at the Banff Center for Conferences, Banff, Alberta, Canada, April 30-May 5, Taylor and Francis, pp. 161-166.

C021

A Photographic Study of Nucleation Characteristics of Cavities in Flow Boiling

Kandlikar, S. G.,  Cartwright, M. D.,  Mizo, V. R.

1995

Kandlikar, S. G., Cartwright, M. D., and Mizo, V. R., 1995, "A Photographic Study of Nucleation Characteristics of Cavities in Flow Boiling," Convective Flow Boiling, Proceedings of Convective Flow Boiling, An International Conference held at the Banff Center for Conferences, Banff, Alberta, Canada, April 30-May 5, Taylor and Francis, pp. 73-78.

C020

Bubble Behavior and Departure Bubble Diameter of Bubbles Generated Over Nucleating Cavities in Flow Boiling

Kandlikar, S. G.

1992

Kandlikar, S. G., 1992, "Bubble Behavior and Departure Bubble Diameter of Bubbles Generated Over Nucleating Cavities in Flow Boiling," Pool and External Flow Boiling, Eds. V. K. Dhir and A. E. Bergles, Proceedings of the Engineering Foundaton Conference, Santa Barbara, CA, March 22-27, 1992.

C019

Correlating Heat Transfer Data in Binary Systems

Kandlikar, S. G.

1991

Kandlikar, S. G., 1991, "Correlating Heat Transfer Data in Binary Systems,"  Paper presented at the National Heat Transfer Conference, July, Minneapolis; Phase Change Heat Transfer, Eds. Hensel, E., Dhir, V.K., Greif, R., and Fillo, J., HTD-Vol. 159, pp. 163-170, ASME. 

C018

Heat Transfer and Pressure Drop Characteristics of Magnet Winding During Cooldown with Flow Boiling of LN2

Kandlikar, S. G.,  Pisera, J.,
Kytomaa, H. K.,  Thome, R. J.,

1991

Kandlikar, S. G., Pisera, J., Kytomaa, H. K., and Thome, R. J., "Heat Transfer and Pressure Drop Characteristics of Magnet Winding During Cooldown with Flow Boiling of LN2," Paper presented at the Conference on Experimental Heat Transfer, Fluid Mechanics and Thermodynamics, Dubrovnik, Yugoslavia, August 1991.

C017

Development of a Flow Boiling Map for Subcooled and Saturated Flow Boiling of Different Fluids in Circular Tubes

Kandlikar, S. G.

1991

Kandlikar, S. G., "Development of a Flow Boiling Map for Subcooled and Saturated Flow Boiling of Different Fluids in Circular Tubes", in Heat Transfer with Phase Change, Habib, I.S. et al., eds., ASME HTD-Vol. 114, pp. 51-62, 1990. Also published in Transactions of ASME, Journal of Heat Transfer, Vol. 113, pp. 190-200, 1991. 

C016

A Model for Flow Boiling Heat Transfer in Augmented Tubes and Compact Evaporators

Kandlikar, S. G.

1990

Kandlikar, S. G., "A Model for Flow Boiling Heat Transfer in Augmented Tubes and Compact Evaporators," Paper presented at the 1990 ASME Winter Annual Meeting, Dallas, Nov. 25-30, 1990.

C015

Flow Boiling Maps for Water, R-22 and R-134a in the Saturated Region

Kandlikar, S. G.

1990

Kandlikar, S. G., "Flow Boiling Maps for Water, R-22 and R-134a in the Saturated Region", paper presented at the 9th International Heat Transfer Conference, Jerusalem, August, 1990. 

C014

A Mechanistic Model for Flow Boiling Heat Transfer

Kandlikar, S. G.

1990

Kandlikar, S. G., "A Mechanistic Model for Flow Boiling Heat Transfer," Paper presented at the 1990 ASME Winter Annual Meeting, Dallas, Nov. 1990. 

C013

A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes

Kandlikar, S. G.

1990

Kandlikar, S. G., "A General Correlation for Two-phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes", Journal of Heat Transfer, Vol. 112, pp. 219-228, 1990. 

C012

Asymptotic Effectiveness - NTU Formulas for Multipass Plate Heat Exchangers

Shah, R. K.,  Kandlikar, S. G.

1989

Kandlikar, S. G., and Shah, R. K., "Asymptotic Effectiveness - NTU Formulas for Multipass Plate Heat Exchangers", Journal of Heat Transfer, Vol. 111, pp. 314-321, 1989.  

C011

Thermal Design Theory for Compact Evaporators

Kandlikar, S. G.

1989

Kandlikar, S. G., "Thermal Design Theory for Compact Evaporators", Paper presented at the A.L. London Symposium, Stanford University, March 1989, Hemisphere Publishing Corp., Washington, 1989. 

C010 

Multipass Plate Heat Exchangers -- Effectiveness-NTU Results and Guidelines for Selecting Pass Arrangements

Shah, R. K.,  Kandlikar, S. G.

1989

Kandlikar, S. G., and Shah, R. K., "Multipass Plate Heat Exchangers -- Effectiveness-NTU Results and Guidelines for Selecting Pass Arrangements", Journal of Heat Transfer, Vol. 111, pp. 300-313, 1989. 

C009

Instabilities In an R-11 Thermosiphon Loop with Applications in Microelectronic Chip Cooling

Kandlikar, S. G.,  Habsberg, S.

1989

Kandlikar, S. G., and Habsberg, S., "Instabilities In an R-11 Thermosiphon Loop with Applications in Microelectronic Chip Cooling", Paper presented at the ASME Winter Annual Meeting, San Francisco, Dec. 1989.  

C008

The Influence of the Number of Thermal Plates on Plate Heat Exchanger Performance

Shah, R. K.,  Kandlikar, S. G.

1988

Shah, R. K., and Kandlikar, S. G., "The Influence of the Number of Thermal Plates on Plate Heat Exchanger Performance", special volume to honor Dr. Ramachandran at National Heat Transfer Conference, India, 1988. 

C007

A Parametric Study of Saturated Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes

Kandlikar, S. G.

1988

Kandlikar, S. G., "A Parametric Study of Saturated Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes", in Experimental Fluid Mechanics, Heat Transfer and Thermodynamics, Shah, R.K., Ganic, E.N., and Yang, K.T., editors, Hemisphere Publishing Corp, Washington, 1988. 

C006

A New Correlation for Heat Transfer During Flow Boiling

Kandlikar, S. G.,  Thakur, B. K.

1982

Kandlikar, S. G., and Thakur, B. K., "A New Correlation for Heat Transfer During Flow Boiling", Paper presented at the 16th Southeastern Seminar on Thermal Sciences, 1982. 

C005

 

Ice Growth in Rivers

Desmond, R. M., Karlekar, B. V.,  Kandlikar, S. G.

1981

Desmond, R. M., Karlekar, B. V., and Kandlikar, S. G., "Ice Growth in Rivers", International Symposium on Ice, Quebec City, 1981. 

C004

Selection of Working Fluid for Low Temperature Thermal Power Cycles

Kandlikar, S. G.,  Jaganmohan, A.

1978

Kandlikar, S. G., and Jaganmohan, A., "Selection of Working Fluid for Low Temperature Thermal Power Cycles", National Solar Energy Conference, Bhavnagar, India, 1978. 

C003

Geometrical Aspects of a Cylindrical Parabolic Collector Operated with Intermittent Tracking

Kandlikar, S. G., 
Vij, S. K.

1978

Kandlikar, S. G., and Vij, S. K., "Geometrical Aspects of a Cylindrical Parabolic Collector Operated with Intermittent Tracking", In SUN, Mankind's Future Source of Energy, Proceedings of the International Solar Energy Society Congress, eds. De Winter, F. and Cox, M., pp. 1254-1258, 1978. 

C002

Predicting Thermodynamic Properties of Aqua-ammonia Mixtures

Kandlikar, S. G.

1976

Kandlikar, S. G., "Predicting Thermodynamic Properties of Aqua-ammonia Mixtures", Presented at the 5th National Symposium on Refrigeration and Airconditioning, Madras, 1976. 

C001

Binary Annular Two-phase Flow with Mixture Refrigerants

Kandlikar, S. G.,  Sukhatme, S. P.

1975

Kandlikar, S. G., and Sukhatme, S. P., "Binary Annular Two-phase Flow With Mixture Refrigerants", Presented at the third National Conference, Bombay, India, 1975.