Engineering Management Minor

Overview for Engineering Management Minor

The minor in engineering management integrates technological and managerial expertise while focusing on the management of these areas. Engineering management is concerned with understanding the technology involved in an engineering project and the management process through which the technology is applied.

Notes about this minor:

  • This minor is closed to students majoring in industrial engineering.
  • Posting of the minor on the student's academic transcript requires a minimum GPA of 2.0 in the minor.

The plan code for Engineering Management Minor is ENGMGT-MN.

Curriculum for 2023-2024 for Engineering Management Minor

Current Students: See Curriculum Requirements

Course
Prerequisites
MATH-233
Linear Systems and Differential Equations
This is an introductory course in linear algebra and ordinary differential equations in which a scientific computing package is used to clarify mathematical concepts, visualize problems, and work with large systems. The course covers matrix algebra, the basic notions and techniques of ordinary differential equations with constant coefficients, and the physical situation in which they arise. (Prerequisites: MATH-172 or MATH-182 or MATH-182A and students in CHEM-BS or CHEM-BS/MS or ISEE-BS programs.) Lecture 4 (Spring).
Plus one of the following:
   STAT-257
 Statistical Inference
Learn how data furthers understanding of science and engineering. This course covers basic statistical concepts, sampling theory, hypothesis testing, confidence intervals, point estimation, and simple linear regression. A statistical software package such as MINITAB will be used for data analysis and statistical applications. (Prerequisites: MATH-251. NOTE: Students cannot receive credit for both MATH-252 and STAT-257 nor for both STAT-205 and STAT-257.) Lecture 3 (Fall, Spring).
   STAT-205
 Applied Statistics
This course covers basic statistical concepts and techniques including descriptive statistics, probability, inference, and quality control. The statistical package Minitab will be used to reinforce these techniques. The focus of this course is on statistical applications and quality improvement in engineering. This course is intended for engineering programs and has a calculus prerequisite. Note: This course may not be taken for credit if credit is to be earned in STAT-145 or STAT-155 or MATH 252.. (Prerequisite: MATH-173 or MATH-182 or MATH-182A or equivalent course.) Lecture 3 (Fall, Spring).
   ISEE-325
 Engineering Statistics and Design of Experiments
This course covers statistics for use in engineering as well as the primary concepts of experimental design. The first portion of the course will cover: Point estimation; hypothesis testing and confidence intervals; one- and two-sample inference. The remainder of the class will be spent on concepts of design and analysis of experiments. Lectures and assignments will incorporate real-world science and engineering examples, including studies found in the literature. (Prerequisites: STAT-251 or MATH-251 or equivalent course.) Lecture 3 (Fall, Spring).
Required Courses
ACCT-500
Cost Management in Technical Organizations
A first course in accounting for students in technical disciplines. Topics include the distinction between external and internal accounting, cost behavior, product costing, profitability analysis, performance evaluation, capital budgeting, and transfer pricing. Emphasis is on issues encountered in technology-intensive manufacturing organizations. This course is not available for Saunders College of Business students. (This class is restricted to undergraduate students with at least 3rd year standing.) Lecture 3 (Spring).
ISEE-345
Engineering Economy
Time value of money, methods of comparing alternatives, depreciation and depletion, income tax consideration and capital budgeting. Cannot be used as a professional elective for ISE majors. Course provides a foundation for engineers to effectively analyze engineering projects with respect to financial considerations. Lecture 3 (Fall, Spring).
ISEE-350
Engineering Management
Development of the fundamental engineering management principles of industrial enterprise, including an introduction to project management. Emphasis is on project management and the development of the project management plan. At least one term of previous co-op experience is required. (Prerequisite: BIME-499 or MECE-499 or ISEE-499 or CHME-499 or EEEE-499 or CMPE-499 or MCEE-499 or equivalent course.) Lecture 3 (Spring).
Electives
Choose two of the following:
   ISEE-301
 Operations Research
An introduction to optimization through mathematical programming and stochastic modeling techniques. Course topics include linear programming, transportation and assignment algorithms, Markov Chain queuing and their application on problems in manufacturing, health care, financial systems, supply chain, and other engineering disciplines. Special attention is placed on sensitivity analysis and the need of optimization in decision-making. The course is delivered through lectures and a weekly laboratory where students learn to use state-of-the-art software packages for modeling large discrete optimization problems. (Prerequisites: MATH-233 or (MATH-231 and MATH-241) or equivalent course.) Lab 2, Lecture 3 (Spring).
   ISEE-323
 Systems and Facilities Planning
A basic course in quantitative models on layout, material handling, and warehousing. Topics include product/process analysis, flow of materials, material handling systems, warehousing and layout design. A computer-aided layout design package is used. (Corequisites: ISEE-301 or equivalent course.) Lab 2, Lecture 2 (Spring).
   ISEE-420
 Production Planning/Scheduling
A first course in mathematical modeling of production-inventory systems. Topics included: Inventory: Deterministic Models, Inventory: Stochastic Models, Push v. Pull Production Control Systems, Factory Physics, and Operations Scheduling. Modern aspects such as lean manufacturing are included in the context of the course. (Prerequisites: ISEE-301 and (STAT-251 or MATH-251) or equivalent course.) Lecture 3 (Fall).
   ISEE-510
 Systems Simulation
Computer-based simulation of dynamic and stochastic systems. Simulation modeling and analysis methods are the focus of this course. A high-level simulation language such as Simio, ARENA, etc., will be used to model systems and examine system performance. Model validation, design of simulation experiments, and random number generation will be introduced. (Prerequisites: ISEE-200 and ISEE-301 or equivalent course. Co-requisites: ISEE-325 or STAT-257 or MATH-252 or equivalent course.) Lecture 3 (Fall, Spring).
   ISEE-560
 Applied Statistical Quality Control
An applied approach to statistical quality control utilizing theoretical tools acquired in other math and statistics courses. Heavy emphasis on understanding and applying statistical analysis methods in real-world quality control situations in engineering. Topics include process capability analysis, acceptance sampling, hypothesis testing and control charts. Contemporary topics such as six-sigma are included within the context of the course. (Prerequisites: ISEE-325 or STAT-257 or MATH-252 or equivalent course and students in ISEE-BS or ISEE-MN or ENGMGT-MN programs.) Lecture 3 (Fall).
   ISEE-582
 Lean Six Sigma Fundamentals
This course presents the philosophy and methods that enable participants to develop quality strategies and drive process improvements. The fundamental elements of Lean Six Sigma are covered along with many problem solving and statistical tools that are valuable in driving process improvements in a broad range of business environments and industries. Successful completion of this course is accompanied by “yellow belt” certification and provides a solid foundation for those who also wish to pursue a “green belt.” (Green belt certification requires completion of an approved project which is beyond the scope of this course). (Prerequisites: STAT-145 or STAT-251 or MATH-251 or CHME-391 or equivalent course and at least 4th year standing.) Lecture 3 (Fall, Spring, Summer).