Title | Authors | Year | Citation | |
---|---|---|---|---|

1 Variable Fin Density Flow Channels for Effective Cooling and Mitigation of Temperature Non-Uniformity in 3D ICs | Lorenzini-Guitierrez, L-D. Kandlikar, S.G. | 2014 | Journal of Electronic Packaging, 136, pp. 021007-1 - 021007-11 | J142 |

Review and Projections of Integrated Cooling Systems for 3D ICs | Kandlikar, S.G. | 2014 | Journal of Electronic Packaging, 136, pp. 024001-1 - 024001-11 | J141 |

Contact Line Characteristics of Liquid-Gas Interfaces over Grooved Surfaces | Gopalan, P. Kandlikar, S.G. | 2014 | Microfluidics and Nanofluidics, DOI 10.1007/s10404-014-1375-1 | J140 |

Heat Transfer in Microchannels - 2012 Status and Research Needs | Kandlikar, S.G. Colin, S. Peles, Y. Garimella, S. Pease, R.F. Brandner, J.J. Tuckerman, D.B. | 2013 | Journal of Heat Transfer, 135, pp. 091001-1 - 091001-18 | J139 |

Evaluation of Pressure Drop Performance During Enhanced Flow Boiling in Open Microchannels with Tapered Manifolds | Kalani, A. Kandlikar, S.G. | 2014 | Journal of Heat Transfer, 136, pp. 051502-1 - 051502-7 | J138 |

Review of the Manufacturing Techniques for Porous Surfaces Used in Enhanced Pool Boiling | Patil, C.M. Kandlikar, S.G. | 2014 | Heat Transfer Engineering, 35(10), pp. 887-902 | J137 |

Two-Phase Flow in GDL and Reactant Channels of a Proton Exchange Membrane Fuel Cell | Kandlikar, S.G. See, E.J. Koz, M. Gopalan, P. Banerjee, R. | 2014 | International Journal of Hydrogen Energy, 39, pp. 6620 - 6636 | J136 |

An Experimental Investigation on Friction Characteristics and Heat Transfer of Air and CO2 Flow in Microtubes with Structured Surface Roughness | Lin, T-Y. Chen, C-W. Yang, C-Y. Kandlikar, S.G. | 2014 | Heat Transfer Engineering, 35(2), pp. 150-158 | J135 |

Heat Transfer Investigation of Air Flow in Microtubes - Part II: Scale and Axial Conduction Effects | Lin, T-Y. Kandlikar, S.G. | 2013 | Journal of Heat Transfer, 135, pp. 031704-1 - 031704-6 | J134 |

Heat Transfer Investigation of Air Flow in Microtubes - Part I: Effects of Heat Loss, Viscous Heating, and Axial Conduction | Lin, T-Y. Kandlikar, S.G. | 2013 | Journal of Heat Transfer, 135, pp. 031703-1 - 031703-9 | J133 |

Liquid Water Quantification in the Cathode Side Gas Channels of a Proton Exchange Membrane Fuel Cell Through Two-Phase Flow Visualization | Banerjee, R. Kandlikar, S.G. | 2014 | Journal of Power Sources, 247, pp. 9 - 19 | J132 |

Effect of Channel Materials and Trapezoidal Corner Angles on Emerging Droplet Behavior in Proton Exchange Membrane Fuel Cell Gas Channels | Gopalan, P. Kandlikar, S.G. | 2014 | Journal of Power Sources, 248, pp. 230-238 | J131 |

Modeling Dynamic Interaction Between an Emerging Water Droplet and the Sidewall of a Trapezoidal Channel | Gopalan, P. Kandlikar, S.G. | 2014 | Colloids and Surfaces A: Physicocheical and Engineering Aspects, 441, pp. 267 - 274 | J130 |

Enhanced Pool Boiling with Ethanol at Subatmospheric Pressure for Electronics Cooling | Kalani, A. Kandlikar, S.G. | 2013 | Journal of Heat Transfer, 135, pp. 111002-1-111002-7 | J129 |

Enhanced Flow Boiling Over Open Microchannels with Uniform and Tapered Gap Manifolds | Kandlikar, S.G. Widger, T. Kalani, A. Mejia, V. | 2013 | Journal of Heat Transfer, 135, pp. 061401-1 - 061401-9 | J128 |

Numerical Investigation of Interfacial Transport Resistance Due to Water Droplets in Proton Exchange Membrane Fuel Cell Air Channels | Koz, M. Kandlikar, S.G. | 2013 | Journal of Power Sources, 243, pp. 946-957 | J127 |

Pool Boiling Heat Transfer Enhancement over Cylinderical Tubes with Water at Atmospheric Pressure, Part II | Mehta, J.S. Kandlikar, S.G. | 2013 | International Journal of Heat and Mass Transfer, 64, pp. 1216 - 1225 | J126 |

Pool Boiling Heat Transfer Enhancement over Cylinderical Tubes with Water at Atmospheric Pressure, Part I | Mehta, J.S. Kandlikar, S.G. | 2013 | International Journal of Heat and Mass Transfer, 64, pp. 1205-1215 | J125 |

Effect of Channel Material on Water Droplet Dynamics in a PEMFC Gas Channel | Gopalan, P. Kandlikar, S.G. | 2013 | Journal of Electrochemical Society, 160(6), pp. F487-F495 | J124 |

Controlling Bubble Motion Over Heated Surface Through Evaporation Momentum Force to Enhance Pool Boiling Heat Transfer | Kandlikar, S.G. | 2013 | Appl. Phys. Lett., 102 | J123 |

Performance of Online and Offset Micro Pin-Fin Heat Sinks With Variable Fin Density | Rubio-Jimenez, C.A. Kandlikar, S.G. Hernandez-Guerrero, A. | 2013 | IEEE Transactions on Components, Packaging and Manufacturing Technology, 3(1) | J122 |

A Numerical Study on the Effects of 2D Structured Sinusoidal Elements on Fluid Flow and Heat Transfer at Microscale | Dharaiya, V.V. Kandlikar, S.G. | 2013 | International Journal of Heat and Mass Transfer, 57 | J121 |

Selected Papers From the Ninth International Conference on Nanochannels, Microchannels, and Minichannels | Kandlikar, S.G. | 2013 | Heat Transfer Engineering, 34(2-3) | J120 |

An Experimental Investigation of Structured Roughness Effect on Heat Transfer During Single-Phase Liquid Flow at Microscale | Lin, T-Y. Kandlikar, S.G. | 2012 | Journal of Heat Transfer, 134 | J119 |

Pool Boiling Heat Transfer Enhancement Through Nanostructures on Silicon Microchannels | Yao, Z. Lu, Y-W. Kandlikar, S.G. | 2012 | Journal of Nanotechnology in Engineering and Medicine, 3 | J118 |

In Memoriam - Professor Warren M. Rohsenow (1921-2011) | Griffith, P. et al. | 2012 | International Journal of Heat and Mass Transfer, 55(19-21) | J117 |

Effects of Structured Roughness on Fluid Flow at the Microscale Level | Wagner, R.N. Kandlikar, S.G. | 2012 | Heat Transfer Engineering, 33(6) | J116 |

Fabrication of Nanowires on Orthogonal Surfaces of Microchannels and Their Effect on Pool Boiling | Yao, Z. Lu, Y-W. Kandlikar, S.G. | 2012 | Journal of Micromechanics and Microengineering, 22(11) | J115 |

Modeling Gas Flow in PEMFC Channels: Part I - Flow Pattern Transitions and Pressure Drop in a Simulated Ex Situ Channel with Uniform Water Injection Through the GDL | Grimm, M. See, E.J. Kandlikar, S.G. | 2012 | International Journal of Hydrogen Energy, 37(17) | J114 |

Droplet-Sidwall Dynamic Interactions in PEMFC Gas Channels | Gopalan, P. Kandlikar, S.G. | 2012 | Journal of Electrochemical Society, 159 | J113 |

Effect of Open Microchannel Geometry on Pool Boiling Enhancement | Cooke, D. Kandlikar, S.G. | 2012 | International Journal of Heat and Mass Transfer, 55(4) | J112 |

3D phase-differentiated GDL microstructure generation with binder and PTFE distributions | Daino, M.M. Kandlikar, S.G. | 2012 | International Journal of Hydrogen Energy, 37 | J111 |

Closure to “Discussion of ‘Heat Transfer Mechanisms During Flow Boiling in Microchannels’ ” | Kandlikar, S.G. | 2012 | Journal of Heat Transfer, 134 | J110 |

Guest Editorial | Kandlikar, S.G. | 2012 | Journal of Heat Transfer, 134 | J109 |

History, Advances, and Challenges in Liquid Flow and Flow Boiling Heat Transfer in Microchannels: A Critical Review | Kandlikar, S.G. | 2012 | Journal of Heat Transfer, 134 | J108 |

A Theoretical Model for Axial Heat Conduction Effects During Single-Phase Flow in Microchannels | Lin, T-Y. Kandlikar, S.G. | 2012 | Journal of Heat Transfer, 134(2) | J107 |

Numerical Analysis of Novel Micro Pin Fin Heat Sink With Variable Fin Density | Rubio-Jimenez, C.A. Kandlikar,S.G. Hernandez-Guerrero, A. | 2012 | IEEE Transactions On Components, Packaging and Manufacturing Technology, 2(5) | J106 |

Heat transfer and friction characteristics of air flow in microtubes | Yang, C-Y. Chen, C-W. Lin, T-Y. Kandlikar, S.G. | 2012 | Journal of Heat Transfer, 134 | J105 |

A critical review of cooling techniques in proton exchange membrane fuel cell stacks | Zhang, G. Kandlikar, S.G. | 2012 | Journal of Hydrogen Energy, 37 | J104 |

Numerical Investigation of Heat Transfer in Rectangular Microchannels Under H2 Boundary Condition During Developing and Fully Developed Laminar Flow | Dharaiya, V.V. Kandlikar, S.G. | 2012 | Journal Of Heat Transfer, 134 | J103 |

Closure to "Discussion of 'Heat Transfer Mechanisms During Flow Boiling in Microchannels' " | Kandlikar, S.G. | 2012 | Journal of Heat Transfer, 134 | J102 |

Direct growth of copper nanowires on a substrate for boiling applications | Yao, Z. Lu, Y-W. Kandlikar, S.G. | 2011 | Micro and Nano Letters, 6(7) | J101 |

Effects of nanowire height on pool boiling performance of water on silicon chips | Yao, Z. Lu, Y-W. Kandlikar, S.G. | 2011 | International Journal of Thermal Sciences, 50(11) | J100 |

Quantification and characterization of water coverage in PEMFC gas channels using simultaneous anode and cathode visualization and image processing | Sergi, J.M. Kandlikar, S.G. | 2011 | International Journal of Hydrogen Energy, 36(19) | J099 |

Liquid filling in a corner with a fibrous wall - An application to two-phase flow in PEM fuel cell gas channels | Rath, C. Kandlikar, S.G. | 2011 | Colloids and Surfaces A: Physicochemical and Engineering Aspects, 384 | J098 |

Numerical Study of Bubble Growth and Wall Heat Transfer During Flow Boiling in a Microchannel | Mukherjee, A. Kandlikar, S.G. Edel, Z.J. | 2011 | International Journal of Heat and Mass Transfer, 54 | J097 |

Nanoscale Surface Modification Techniques for Pool Boiling Enhancements - A Critical Review and Future Directions | Lu, Y-W. Kandlikar, S.G. | 2011 | Heat Transfer Engineering, 32(10) | J096 |

Water Management Studies in PEM fuel cells, part IV: Effects of channel surface wettability, geometry, orientation on the two phase flow in parallel gas channels | Lu, Z. Rath, C. Zhang, G. Kandlikar, S.G. | 2011 | International Journal of Hydrogen Energy, 36(16) | J095 |

Selected papers from the Seventh International Conference on Nanochannels, Microchannels and Minichannels | Kandlikar, S.G. | 2011 | Heat Transfer Engineering, 32(7-8) | J094 |

Water Management in a PEMFC: Water Transport Mechanism and Material Degradation In Gas Diffusion Layer | Kandlikar, S.G. Garofalo, M.L. Lu, Z. | 2011 | Fuel Cells, 11(6) pp. 814-823 | J093 |

Determination of Effective Water Vapor Diffusion Coefficients in PEMFC Gas Diffusion layers | LaManna, J.M. Kandlikar, S.G. | 2011 | International Journal of Hydrogen Energy, 36 | J092 |

Through-Plane Water Transport Visualization in a PEMFC by Visible and Infrared Imaging | Daino, M.M. Lu, Z. LaManna, J.M. Owejan, J.P. Trabold, T.A. Kandlikar, S.G. | 2011 | Electrochemical and Solid-State Letters 14(6) | J091 |

Pool Boiling Heat Transfer and Bubble Dynamics Over Plain and Enhanced Microchannels | Cooke, D. Kandlikar, S.G. | 2011 | Journal of Heat Transfer,133(5) | J090 |

Scale effects on flow boiling heat transfer in microchannels: A fundamental perspective | Kandlikar, S.G. | 2010 | International Journal of Thermal Sciences, 132(7), pp 1073-1085 | J089 |

A Scale Analysis Based Theoretical Force Balance Model for Critical Heat Flux (CHF) During Saturated Flow Boiling in Microchannels and Minichannels | Kandlikar, S.G. | 2010 | Journal of Heat Transfer, 132 | J088 |

Application of Lubrication Theory and Study of Roughness Pitch During Laminar, Transition, and Low Reynolds Number Turbulent Flow at Microscale | Brackbill, T.P. Kandlikar, S.G. | 2010 | Heat Transfer Engineering, 31(8), pp. 634-645 | J087 |

Water Management Studies in PEM Fuel Cells, Part III: Dynamic Breakthrough and Intermittent Drainage Characteristics from GDLS with and without MPLS | Lu, Z. Daino, M.M. Rath, C. Kandlikar, S.G. | 2010 | International Journal of Hydrogen Energy, 35(9), pp. 4222-4233 | J086 |

Similarities and Differences Between Flow Boiling in Microchannels and Pool Boiling | Kandlikar, S.G. | 2010 | Heat Transfer Engineering, 31(3), pp. 159-167 | J085 |

Fundamental Research Needs in Combined Water and Thermal Management Within a Proton Exchange Membrane Fuel Cell Stack Under Normal and Cold-Start Conditions | Kandlikar, S.G. Lu, Z. | 2009 | Journal of Fuel Cell Science and Technology, 6(4) | J084 |

The Effect of Inlet Constriction on Bubble Growth During Flow Boiling in Microchannels | Mukherjee, A. Kandlikar, S.G. | 2009 | International Journal of Heat and Mass Transfer, 52(21/22), pp. 5204-5212 | J083 |

Uneven gas diffusion layer intrusion in gas channel arrays of proton exchange membrane fuel cell and its effects on flow distribution | Kandlikar, S.G. Lu, Z. Lin, T.Y. Cooke, D. Daino, M. | 2009 | Journal of Power Sources, 194, pp. 328-337 | J082 |

Water Management Studies in PEM Fuel Cells, Part II: Ex Situ Investigation of Flow Maldistribution, Pressure Drop and Two-Phase Flow Pattern in Gas Channels | Lu, Z. Kandlikar, S.G. Rath, C. Grimm, M. Domigan, W. White, A.D. Hardbarger, M. Owejan, J.P. Trabold, T.A. | 2009 | International Journal of Hydrogen Energy, 34(8), pp. 3445-3456 | J081 |

Water Management Studies in PEM Fuel Cells, Part I: Fuel Cell Design and in Situ Water Distributions | Owejan, J.P. Gagliardo, J.J. Sergi, J.J. Kandlikar, S.G. Trabold, T.A. | 2009 | International Journal of Hydrogen Energy, 34(8), pp. 3436-3444 | J080 |

Thermal Management issues in a PEMFC stack – A Brief Review of Current Status | Kandlikar, S.G. Lu, Z. | 2009 | Applied Thermal Engineering, 29(7), pp. 1276-1280 | J079 |

Hydrogen Horizon | Kandlikar, S.G. Sergi, J. LaManna, J. Daino, M. | 2009 | Mechanical Engineering, 131(5), pp. 32-35 | J078 |

Measurement of Flow Maldistribution in Parallel Channels and its Application to Ex-Situ and In-Situ Experiments in PEMFC Water Management Studies | Kandlikar, S.G. Lu, Z Domigan, W.E. White, A.D. Benedict, M.W. | 2009 | International Journal of Heat and Mass Transfer, 52(7/8), pp. 1741-1752 | J077 |

Liquid Cooled Cold Plates for Industrial High-Power Electronic Devices Thermal Design and Manufacturing Considerations | Kandlikar, S.G. Hayner, C.N. | 2009 | Heat Transfer Engineering, 30(12), pp. 918-930 | J076 |

Comparison of Roughness Parameters for Various Microchannel Surfaces in Single-Phase Flow Applications | Young, P.L. Brackbill, T.P. Kandlikar, S.G. | 2009 | Heat Tranfer Engineering, 30(1/2), pp. 78-90 | J075 |

Fouling and its Mitigation in Silicon Microchannels Used for IC Chip Cooling | Perry, J.L. Kandlikar, S.G. | 2008 | Microfluidics and Nanofluidics, 5(3), pp. 357-371 | J074 |

Experimental Study and Model on Critical Heat Flux of Refrigerant-123 and Water in Microchannels | Kuan, W.K. Kandlikar, S.G. | 2008 | Journal of Heat Transfer, 130(3) | J073 |

Exploring roughness effects on laminar internal flow-Are we ready for change? | Kandlikar, S.G. | 2008 | Microscale and Nanoscale Thermophysical Engineering, 12(1), pp. 61-82 | J072 |

Microscale and Macroscale Aspects of Water Management Challenges in PEM Fuel Cells | Kandlikar, S.G. | 2008 | Heat Transfer Engineering, 29(7), pp. 575-587 | J071 |

Numerical Study of Single Bubbles with Dynamic Contact Angle during Nucleate Pool Boiling | Mukherjee, A. Kandlikar, S.G. | 2007 | International Journal of Heat Transfer, 50(1/2), pp. 127-138 | J070 |

Selected Papers from the Fourth International Conference on Nanochannels, Microchannels, and Minichannels | Kandlikar, S.G. | 2007 | Heat Transfer Engineering, 28(8/9), pp. 661 | J069 |

Effects of Flow Field and Diffusion Layer Properties On Water Accumulation In A PEM Fuel Cell | Owejan, J.P. Trabold, T.A. Jacobson, D.L. Arif, M. Kandlikar, S.G. | 2007 | International Journal of Hydrogen Energy, 32(17), pp. 4489-4509 | J068 |

A roadmap for implementing minichannels in refrigeration and air-conditioning systems - Current status and future directions | Kandlikar, S.G. | 2008 | Heat Transfer Engineering, 28(12), pp. 973-985 | J067 |

Leading research institutions abroad - Where history is being made | Kandlikar, S.G. | 2007 | Heat Transfer Engineering, 28(12), p. 967 | J066 |

Evaluation of jet impingement, spray and microchannel chip cooling options for high heat flux removal | Kandlikar, S.G. Bapat, A.V. | 2007 | Heat Transfer Engineering, 28(11), pp. 911-923 | J065 |

Discussion: "Heat transfer and wall heat flux partitioning during subcooled flow nucleate boiling - A review" (Warrier, G.R., and Dhir, V.K., 2006, Journal of Heat Transfer, 128, pp. 1243-1256) | Kandlikar, S.G. | 2007 | Journal of Heat Transfer, 129(9), pp. 1300-1301 | J064 |

Experimental study on the effect of stabilization on flow boiling heat transfer in microchannels | Kuan, W.K. Kandlikar, S.G. | 2007 | Heat Transfer Engineering, 28(8/9), pp. 746-752 | J063 |

Effect of sawtooth roughness on pressure drop and turbulent transition in microchannels | Brackbill, T.P. Kandlikar, S.G. | 2007 | Heat Transfer Engineering, 28(8/9), pp. 662-669 | J062 |

High heat flux removal with microchannels – A roadmap of challenges and opportunities | Kandlikar, S.G. | 2005 | Heat Transfer Engineering, 26(8), pp. 5-14 | J061 |

An Experimental Investigation into the Effect of Surfactants on Air-Water Two-Phase Flow in Minichannels | English, N.J. Kandlikar, S.G. | 2006 | Heat Transfer Engineering, 27(4), pp. 99-109 | J060 |

Numerical study of an evaporating meniscus on a moving heated surface | Mukherjee, A. Kandlikar, S.G. | 2006 | Journal of Heat Transfer, 128(12), pp. 1285-1292 | J059 |

Numerical simulation of flow through microchannels with designed roughness | Rawool, A.S. Mitra, S.K. Kandlikar, S.G. | 2006 | Microfluidics and Nanofluidics, 2(3), pp. 215-221 | J058 |

Characterization of the effect of surface roughness and texture on fluid flow-past, present and future | Taylor, J.B. Carrano, A.L. Kandlikar, S.G. | 2006 | International Journal of Thermal Sciences, 45(10), pp. 962-968 | J057 |

Numerical study of single bubbles with dynamic contact angle during nucleate pool boiling | Mukherjee, A. Kandlikar, S.G. | 2007 | International Journal of Heat and Mass Transfer, 50, pp. 127-138 | J056 |

Nucleation characteristics and stability considerations during flow boiling in microchannels | Kandlikar, S.G. | 2006 | Experimental Thermal and Fluid Science, 30(5), pp. 441-447 | J055 |

Review of fabrication of nanochannels for single phase liquid flow | Perry, J.L. Kandlikar, S.G. | 2006 | Microfluidics and Nanofluidics, 2(3) | J054 |

Development of an Experimental Facility for Investigating Single-Phase Liquid Flow in Microchannels | Steinke, M.E. Kandlikar, S.G. Magarlein, J.H. Colgan, E.G. Raisanen, A.D. | 2006 | Heat Transfer Engineering, 27(4), pp. 41-52 | J053 |

Stabilization of Flow Boiling in Microchannels Using Pressure Drop Elements and Fabricated Nucleation Sites | Kandlikar, S.G. Kuan, W.K. Willistein, D.A. Borrelli J. | 2006 | Journal of Heat Transfer, 128(4), pp. 389-396 | J052 |

Effect of Liquid-Vapor Phase Distribution on the Heat Transfer Mechanisms during Flow Boiling in Minichannels and Microchannels | Kandlikar, S.G. | 2006 | Heat Transfer Engineering, 27(1), pp. 4-13 | J051 |

An experimental investigation into the effect of surfactants on air-water two-phase flow in minichannels | English, N.J. Kandlikar, S.G. | 2006 | Heat Transfer Engineering, 27(4), pp. 99 - 109 | J050c |

Numerical simulation of growth of a vapor bubble during flow boiling of water in a microchannel | Mukherjee, A. Kandlikar, S.G. | 2005 | Microfluidics and Nanofluidics, 1(2), pp. 137-145 | J050b |

Roughness effects at microscale – reassessing Nikuradse's experiments on liquid flow in rough tubes | Kandlikar, S.G. | 2005 | Bulletin of the Polish Academy of Sciences, 53(4), pp. 343-349 | J050 |

Characterization of surface roughness effects on pressure drop in single-phase flow in minichannels | Kandlikar, S.G. Derek Schmitt Andres L. Carrano James B. Taylor | 2005 | Physics of Fluids, 17(10) | J049 |

Numerical simulation of flow through microchannels with designed roughness | Rawool, A.S. Mitra, S.K. Kandlikar, S. G. | 2005 | Microfluidics and Nanofluidics 2(3) pp. 215-221 | J048 |

An Experimental Study on the Effect of Gravitational Orientation on Flow Boiling of Water in 1054 X 197 μm Parallel Minichannels | Kandlikar, S.G. Balasubramanian, P. | 2005 | Journal of Heat Transfer, 127(8), pp. 820-829 | J047 |

High Flux Heat Removal with Microchannels-A Roadmap of Challenges and Opportunities | Kandlikar, S.G. | 2005 | Heat Transfer Engineering, 26(8), pp. 5-14 | J046 |

Experimental Study of Heat Transfer in an Evaporating Meniscus on a Moving Heated Surface | Kandlikar, S.G. Kuan, W.K. Mukherjee, A. | 2005 | Journal of Heat Transfer, 127(3), pp. 244-252 | J045 |

Experimental Study of Flow Patterns, Pressure Drop, and Flow Instabilities in Parallel Rectangular Minichannels | Balasubramanian, P. Kandlikar, S.G. | 2005 | Heat Transfer Engineering, 26(3), pp. 20-27 | J044 |

On the Nature of Critical Heat Flux in Microchannels | Bergles, A.E. Kandlikar, S.G. | 2005 | Journal of Heat Transfer, 127(1), pp. 101-107 | J043 |

Essentials of Effective Technical Communication Part IV – How to Make a Technical Presentation | Kandlikar, S.G. | 2005 | Journal of the Japan Society of Mechanical Engineers, 108(3), pp. 206-212 | J042 |

Essentials of Effective Technical Communication Part III – How to Write a Technical Paper | Kandlikar, S.G. | 2005 | Journal of the Japan Society of Mechanical Engineers, 108(2), pp. 117-123 | J041 |

Essentials of Effective Technical Communication Part II – Ground Rules: Format and Guidelines | Kandlikar, S.G. | 2005 | Journal of the Japan Society of Mechanical Engineers, 108(1), pp. 57-61 | J040 |

Essentials of Effective Technical Communication Part I – Overview And Background | Kandlikar, S.G. | 2004 | Journal of the Japan Society of Mechanical Engineers, 107(12), pp. 984-987 | J039 |

An Experimental Investigation of Flow Boiling Characteristics of Water in Parallel Microchannels | Steinke, M.E. Kandlikar, S.G. | 2004 | Journal of Heat Transfer, 126(4), pp. 518-526 | J038 |

Review of Single-Phase Heat Transfer Enhancement Techniques for Application in Microchannels, Minichannels and Microdevices | Steinke, M.E. Kandlikar, S.G. | 2004 | International Journal of Heat and Technology, 22(2), pp. 3-11 | J037 |

Evaluation of Single Phase Flow in Microchannels for High Heat Flux Chip Cooling – Thermohydraulic Performance Enhancement and Fabrication Technology | Kandlikar, S.G. Grande W.J. | 2004 | Heat Transfer Engineering, 25(8), pp. 5-16 | J036 |

An Extension of the Flow Boiling Correlation to Transition, Laminar and Deep Laminar Flows in Minichannels and Microchannels. | Kandlikar, S.G. Balasubramanian, P. | 2004 | Heat Transfer Engineering, 25(11) | J035 |

Heat Transfer Mechanisms During Flow Boiling in Microchannels. | Kandlikar, S.G. | 2004 | Journal of Heat Transfer, 126, pp. 8-16 | J034 |

Control and Effect of Dissolved Air in Water During Flow Boiling in Microchannels. | Steinke M.E. Kandlikar, S.G. | 2004 | International Journal of Heat and Mass Transfer, 47(8/9), pp. 1925-1935 | J033 |

Microchannels and Minichannels - The Next Frontier of Heat Transfer Research | Kandlikar, S.G. | 2004 | Thermal Engineering Division, Newsletter No. 40 | J032a |

Predicting Heat Transfer During Flow Boiling In Minichannels and Microchannels | Kandlikar, S.G. Steinke M.E. | 2003 | ASHRAE Transactions, 109(1), pp. 1-9 | J032 |

Effect of Surface Roughness on Heat Transfer and Fluid Flow Characteristics at Low Reynolds Numbers in Small Diameter Tubes. | Kandlikar, S.G. Joshi, S. Tian, S. | 2003 | Heat Transfer Engineering, 24(3), pp. 4-16 | J031 |

An Experimental Investigation on Flow Boiling of Ethylene-Glycol / Water Mixtures | Kandlikar, S.G. Bulut, M. | 2003 | Journal of Heat Transfer, 125(2), pp. 317-325 | J030 |

Leaders in Thermal Evolution- Heat Transfer Research Laboratories in Academic Institutions | Kandlikar, S.G. | 2003 | Heat Transfer Engineering, 24(2) | J029 |

Evolution of Microchannel Flow Passages – Thermohydraulic Performance and Fabrication Technology | Kandlikar, S.G. Grande, W.J. | 2003 | Heat Transfer Engineering, 24(1) | J028 |

Microchannels – Short History and Bright Future | Kandlikar, S.G. | 2003 | Heat Transfer Engineering, 24(1), pp. 4-16 | J027 |

Contact Angles and Interface Behavior During Rapid Evaporation of Liquid on a Heated Surface | Kandlikar, S.G. Steinke M.E. | 2002 | International Journal of Heat and Mass Transfer, 45, pp. 3771-3780 | J026 |

Two-Phase Flow Patterns, Pressure Drop, and Heat Transfer, during Flow Boiling in Minichannel Flow Passages of Compact Heat Evaporators | Kandlikar, S.G. | 2002 | Heat Transfer Engineering, 23(5), pp. 5-23 | J025 |

Fundamental Issues Related to Flow Boiling in Minichannels and Microchannels | Kandlikar, S.G. | 2002 | Experimental Thermal and Fluid Science, 26(2/3/4), pp. 389-407 | J024 |

Critical Heat Flux in Subcooled Flow Boiling – An Assessment of Current Understanding and Future Directions for Research | Kandlikar, S.G. | 2001 | Multiphase Science and Technology, 13(3), pp. 207-232 | J023 |

Contact Angle of Droplets During Spread and Recoil After Impinging on a Heated Surface | Kandlikar, S.G. Steinke M.E. | 2001 | Journal of Chemical Research and Design, 79(A3), pp. 491-498 | J022 |

A Theoretical Model to Predict Pool Boiling CHF Incorporating Effects of Contact Angle and Orientation | Kandlikar, S.G. | 2001 | Journal of Heat Transfer, 123, pp. 1071-1079 | J021 |

Effects of Surface Tension and Binary Diffusion on Pool Boiling of Dilute Solutions – An Experimental Assessment | Kandlikar, S.G. Alves L. | 1999 | Journal of Heat Transfer, 121(2), pp. 488-493 | J020 |

Heat Transfer Characteristics in Partial Boiling, Fully Developed Boiling, and Significant Void Flow Regions of Subcooled Flow Boiling | Kandlikar, S.G. | 1998 | Journal of Heat Transfer, 120(2), pp. 395-402 | J019 |

Boiling Heat Transfer with Binary Mixtures: Part II - Flow Boiling in Plain Tubes | Kandlikar, S.G. | 1998 | Journal of Heat Transfer, 120, pp. 388 | J018 |

Boiling Heat Transfer with Binary Mixtures: Part I - A Theoretical Model for Pool Boiling | Kandlikar, S.G. | 1998 | Journal of Heat Transfer, 120(2), pp. 380-387 | J017 |

Predicting Flow Boiling Heat Transfer of Refrigerants in Microfin Tubes | Kandlikar, S.G. Raykoff, T. | 1997 | Journal of Enhanced Heat Transfer, 4, pp. 257-268 | J016 |

Modeling of Blood Flow in Arterial Bifurcation | Hayes, A.R. Kandlikar, S. G. Phatak, P.D. | 1995 | Journal of Investigative Medicine | J015 |

A Control Volume Approach for Investigating Forces on a Departing Bubble Under Subcooled Flow Boiling | Kandlikar, S.G. Stumm, B. | 1995 | ASME Journal of Heat Transfer, 117, pp. 990-997 | J014 |

Bubble Behavior and Departure Bubble Diameter of Bubbles Generated Over Nucleating Cavities in Flow Boiling | Kandlikar, S.G. | 1992 | Pool and External Flow Boiling | J013 |

Development of a Flow Boiling Map for Subcooled and Saturated Flow Boiling of Different Fluids in Circular Tubes | Kandlikar, S.G. | 1991 | Journal of Heat Transfer, 113, pp. 190-200 | J012 |

A Model for Flow Boiling Heat Transfer in Augmented Tubes and Compact Evaporators | Kandlikar, S. G. | 1991 | Journal of Heat Transfer, 113, pp. 966-972 | J011 |

A General Correlation for Saturated Two-Phase Flow Boiling Heat Transfer Inside Horizontal and Vertical Tubes | Kandlikar, S.G. | 1990 | Journal of Heat Transfer, 112, pp. 219-228 | J010 |

Review of literature and a preliminary experimental investigation on start-up instabilities in an R-11 thermosiphon loop with applications in microelectronic chip cooling | Kandlikar, S. G. Habsberg, S. | 1989 | ASME Heat Transfer Division HTD, 115, pp. 7-13 | J009a |

Asymptotic Effectiveness – NTU Formulas for Multipass Plate Heat Exchangers | Kandlikar, S. G. Shah, R.K. | 1989 | Journal of Heat Transfer, 111, pp. 314-321 | J009 |

Multipass Plate Heat Exchangers -- Effectiveness-NTU Results and Guidelines for Selecting Pass Arrangements | Kandlikar, S.G. Shah, R.K. | 1989 | Journal of Heat Transfer, 111, pp. 300-313 | J008 |

Performance Curves for Different Plate Heat Exchanger Configurations | Kandlikar, S.G. | 1984 | ASME Paper No. 84-HT-26 | J007 |

An Improved Correlation for Predicting Two-phase Boiling Heat Transfer Coefficient in Horizontal and Vertical Tubes | Kandlikar, S.G. | 1983 | Heat Exchangers for Two-phase applications, ASME, HTD, 27 | J006 |

A New Absorber Heat Recovery Cycle to Improve COP of Aqua-Ammonia Absorption Refrigeration System | Kandlikar, S.G. | 1982 | ASHRAE Transactions, 88(1), pp. 141-158 | J005 |

Predicting the Thermodynamic Properties of Superheated Vapor Mixtures of R-22 and R-12 | Kandlikar, S.G. | 1977 | ASHRAE Transactions, 83(2) | J004 |

Guarded Hot Plate Method for the Determination of Thermal Conductivity of Thermal Insulation | Kandlikar, S.G. Sukhatme, S.P. | 1977 | Indian Standards Bulletin, 29(3), pp. 84-85 | J003 |

Predicting the Properties of Mixtures of R22 and R12: Part 2 – Transport Properties | Kandlikar, S.G. Bijlani, C.A. Sukhatme, S.P. | 1975 | ASHRAE Transactions,81(2) | J002 |

Predicting the Properties of Mixtures of R22 and R12: Part 1 – Thermodynamic Properties | Kandlikar, S.G. Bijlani, C.A. Sukhatme, S.P. | 1975 | ASHRAE Transactions, 81(1) | J001 |

Last updated 05.26.2010