• Faculty Research Grant (AUS), (Co-PI), 2018
• Siemens Software Grant via UAE Ministry of Education – Worth Euro 100 Million (shared between 05 UAE universities), (Project lead & Co-PI), 2017 2018.
• Faculty advisor of student’s project (Interactive Pin Actuated Display) that won the 1st Place in the 6th United Arab Emirates Undergraduate Research Competition, 2018.
• RIT Research Grant (PI), 2017.
• RIT Assessment Grant, (Co-PI), 2016.
• Paper Selected in Editor’s Selection of Noteworthy Articles 20132014, Materials and Manufacturing Processes (Taylor and Francis).
• Recipient of 1,03,000 USD worth PhD Faculty Development Program Scholarship, University of Engineering and Technology Lahore, Pakistan, 2008.
• Recipient of 100 % Fee Scholarship (M.Sc. Manufacturing Engineering), UET Lahore, Pakistan, 2006.

• Pervaiz, S., Kannan, S., Deiab, I., Kishawy, H., “Role of Energy Consumption, Cutting Tool and Workpiece Materials Toward Environmentally Conscious Machining: A Comprehensive Review” Part B: Journal of Engineering Manufacture, SAGE. Online first, 2019. [https://doi.org/10.1177/0954405419875344]
• Ahmed, N., Pervaiz, S., Ahmad, S., Rafaqat, M., Hassan, A., Zaindin, M., “LBM of aluminum alloy: towards a control of material removal and roughness",  The International Journal of Advanced Manufacturing Technology, Volume 105, Issue 5–6, pp 1901–1915,  Springer (2019). [ https://doi.org/10.1007/s00170-019-04365-y]
• Zia, M.K., Pervaiz, S., Anwar, S., Samad, W.A., “Reviewing Sustainability of Electrical Discharge Machining Process using Triple Bottom Line Approach”, International Journal of Precision Engineering and Manufacturing-Green Technology, Volume 6, Issue 5, pp 931–945, 2019. [https://doi.org/10.1007/s40684-019-00043-2]
• Ishfaq, K., Ahmed, N., Mufti, N.A, Pervaiz, S., Exploring the contribution of unconventional parameters on spark gap formation and its minimization during WEDM of layered composite, The International Journal of Advanced Manufacturing Technology, Volume 102, Issue 5–8, pp 1659–1669, 2019. Springer. [https://doi.org/10.1007/s00170-019-03301-4]
• Pervaiz, S., Anwar, S., Qureshi, I., Ahmed, N., “Recent Advances in the Machining of Titanium ‎Alloys using ‎Minimum Quantity Lubrication (MQL) ‎Based Techniques" International Journal of Precision Engineering and Manufacturing-Green Technology, Volume 6, Issue 1, pp 133–145, 2019. [https://doi.org/10.1007/s40684-019-00033-4]
• Ishfaq, K., Mufti, N.A., Ahmed, N., and Pervaiz, S., Abrasive waterjet cutting of cladded material: kerf taper and MRR analysis, Materials and Manufacturing Processes, Materials and Manufacturing Processes, 34 (5), 544-553, 2019.  [DOI: 10.1080/10426914.2018.1544710]
• Anwer, S., Ahmed, N., Abdo, B., Pervaiz, S., Chowdhury, M.A.K., Alahmari, A. M., “Electron Beam Melting of Gamma Titanium Aluminide and Investigating the Effect of EBM Layer Orientation on Milling Performance,” International Journal of Advanced Manufacturing Technology, June 2018, Volume 96, Issue 9–12, pp 3093–3107. [https://doi.org/10.1007/s00170-018-1802-7]
• Pervaiz, S., Kannan, S., Kishawy, S., “An extensive review of the water consumption and cutting fluid-based sustainability concerns in the metal cutting sector” Journal of Cleaner Production (Elsevier), Volume 197, Part 1, 1 October 2018, Pages 134-153.  [https://doi.org/10.1016/j.jclepro.2018.06.190]
• Pervaiz, S., Deiab, I., Wahba, E., Rashid, A., and Nicolescu, M., A numerical and experimental study to investigate ‎convective heat transfer and associated cutting ‎temperature distribution in single point turning,” International Journal of Advanced Manufacturing Technology, Volume 94, Issue 1–4, pp 897–910, 2018.
• Pervaiz, S., Deiab, I., Rashid, A., and Nicolescu, M. “Minimal Quantity Cooling Lubrication (MQCL) in Turning of Ti6Al4V: Influence on Surface roughness, Cutting force and Tool Wear” Proc. IMechE Part B: Journal of Engineering Manufacture, Volume: 231 issue: 9, page(s): 1542-1558, 2017.
• Pervaiz, S., Deiab, I., Rashid, A., and Nicolescu, M. “An experimental investigation on effect of minimum quantity cooling lubrication (MQCL) in machining titanium alloy (Ti6Al4V)” International Journal of Advanced Manufacturing Technology, Volume 87, Issue 5–8, pp 1371–1386, 2016.
• Pervaiz, S., Deiab, I., Wahba, E., Rashid, A., and Nicolescu, M., “A novel numerical modeling approach to determine the temperature distribution in the cutting tool using conjugate heat transfer (CHT) analysis,” International Journal of Advanced Manufacturing Technology, Volume 80, Issue 5–8, pp 1039–1047, 2015.
• Darras, B., Abed, F.H., Abdul-Latif, A., Pervaiz, S., “Experimental Investigation of Deformation in 5083 Marine-grade Aluminum Alloy at Elevated Temperatures”, ASM Journal of Materials Engineering and Performance, Vol. 24(4), 1663-1668, 2015.

For complete list please go to the following links;

• Google Scholar: https://scholar.google.ae/citations?user=CYZ4n6YAAAAJ&hl=en
• Research Gate: https://www.researchgate.net/profile/Salman_Pervaiz

• Nouzil, I., Pervaiz, S., Kannan, S., “Numerically Constructed Energy Consumption Mapping for the Orthogonal Machining of Ti6Al4V”, ASME International Mechanical Engineering Congress and Exposition (IMECE) 2019, Salt Lake City, Utah, USA.
• Ghoshal, A., Khan, A., Zahid, M., Pervaiz, S., Kannan, S., Reviewing Machinability of Fibre-Reinforced Polymer (FRP)/ Metallic Stacks Using MQL, ASME International Mechanical Engineering Congress and Exposition (IMECE) 2019, Salt Lake City, Utah, USA.
• Pervaiz, S., Daneji, A., Kannan, S., Numerical Simulation of Orbital Drilling Process of Ti6Al4V, ASME International Mechanical Engineering Congress and Exposition (IMECE) 2019, Salt Lake City, Utah, USA.
• Singh, A.P., El Essawi, B., Daneji, A., Pervaiz, S., Kannan, S., “Prospects and Challenges of Reinforcement Methodologies for 3D Printable Plastics”, Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019, CSME-CFDSC Congress 2019.Canada.
• Alhourani, A., Kannan, S., Pervaiz, S., “Orthogonal Machining of Pure Magnesium Silica Syntactic Foam”, Proceedings of The Joint Canadian Society for Mechanical Engineering and CFD Society of Canada International Congress 2019, CSME-CFDSC Congress 2019.Canada.
• Pervaiz, S., Gadalla, M., “Exergy Analysis of a Machining Operation Using Finite Element (FE) Assisted Simulations”, Accepted in ASME International Mechanical Engineering Congress and Exposition (IMECE) 2018, Pittsburgh, PA, USA.
• Pervaiz, S., Kannan, S., Samad, W.A., “A Numerical Study to Investigate the Influence of Edge Preparation in Vibration Assisted Machining”, Accepted in ASME International Mechanical Engineering Congress and Exposition (IMECE) 2018, Pittsburgh, PA, USA.
• Pervaiz, S., Kannan, S., Ghoshal, A., “An Experimental Investigation of Inclined Hole Drilling for CFRP Under Various Lubrication Techniques”, Accepted in ASME International Mechanical Engineering Congress and Exposition (IMECE) 2018, Pittsburgh, PA, USA.
• Pervaiz, S., Kannan, S., Samad, W. A., “Numerical Modeling of Charpy Impact Test to Determine the Fracture Characteristics of AISI 1045”, accepted in Society of Experimental Mechanics (SEM) Annual Conference & Exposition on Experimental & Applied Mechanics, Greenville, SC, USA, June 12-15, 2018.
• Kannan, S., Kui, L., Pervaiz, S., et al. “Surface integrity in deburring of titanium alloys”, accepted in 13th ASME Manufacturing Science and Engineering Conference (MSEC2018), Texas A&M University, College Station, Texas. USA, June 18 – 22, 2018.
• Pervaiz, S., Kannan, S., “FEM assisted observations of cutting forces, temperature and chip curling in oblique machining” Canadian Society of Mechanical Engineering, CSME 2018, Toronto, CANADA, May 27-30, 2018.
• Pervaiz, S., Samad, W.A., “Tool Wear Mechanisms of Physical Vapor Deposition (PVD) TiAlN Coated Tools Under Vegetable Oil Based Lubrication”, Society of Experimental Mechanics (SEM) Annual Conference & Exposition on Experimental & Applied Mechanics, June 12-15, 2017, Indianapolis, Indiana USA.
• Pervaiz, S., Samad, W.A., “An Experimental Investigation on the Compressive Response of Sandwich Panel under Edgewise Compression”, 3rd International Conference on Mechanics of Composites (MECHCOMP3) in Bologna 4-7 July 2017.

For complete list please go to the following links;

• Google Scholar: https://scholar.google.ae/citations?user=CYZ4n6YAAAAJ&hl=en
• Research Gate: https://www.researchgate.net/profile/Salman_Pervaiz