Publications

Peer-Reviewed Published Journal Papers

  1. R. Guila, A. Ganguly, M. Kuhl, E. Rashedi, C. Hochgraf (2026), “AI-Driven Radio Propagation Prediction in Automated Warehouses using Variational Autoencoders”, IEEE Transactions on Industrial Informatics.

  2. P.M. Kuber and E. Rashedi (2025), “Effects of a Wearable Assistive Device on Postural Control and Stability During Symmetric and Asymmetric Intermittent Trunk Flexion Tasks”, Bioengineering, 12(5):456.

  3. Jadeja, S., Kuber, P.M., & Rashedi, E. (2025), “Effects of Cognitive Engagement on Physical Performance and Perceived Workload During Isometric Exertions of Index Finger”, Human Factors, 00187208251332777.

  4. P.M. Kuber and E. Rashedi (2025), “Exoskeletons in Intermittent Bending Tasks: Assessing Muscle Demands, Endurance, and User Perspectives”, Human Factors, 00187208251324036.

  5. P.M. Kuber and E. Rashedi (2024), “Investigating Spatiotemporal Effects of Back-Support Exoskeletons Using Unloaded Cyclic Trunk Flexion–Extension Task Paradigm”, Applied Sciences, 14(13): p. 5564.

  6. P.M. Kuber, A.R. Kulkarni, and E. Rashedi (2024), “Machine Learning-Based Fatigue Level Prediction for Exoskeleton-Assisted Trunk Flexion Tasks Using Wearable Sensors”, Applied Sciences, 14(11): p. 4563.

  7. P.M. Kuber, and E. Rashedi (2024), “Training and Familiarization with Industrial Exoskeletons: A Review of Considerations, Protocols, and Approaches for Effective Implementation”, Biomimetics, 9(9): p. 520.

  8. P.M. Kuber, A.R. Kulkarni, and E. Rashedi (2024), “How Effective Are Forecasting Models in Predicting Effects of Exoskeletons on Fatigue Progression?”, Sensors, 24(18): p. 5971.

  9. S. Jahangiri, M. Abdollahi, R. Patil, E. Rashedi, N. Azadeh-Fard (2024), “A Machine Learning Model to Predict Heart Failure Readmission: Toward Optimal Feature Set”, Frontiers in Artificial Intelligence, 7, 1363226.

  10. P.M. Kuber, H Godbole, E. Rashedi (2024), “Detecting Fatigue during Exoskeleton-Assisted Trunk Flexion Tasks: A Machine Learning Approach”, Applied Sciences, 14(9), 3569.

  11. M. Abdollahi, P.M. Kuber, E. Rashedi (2024), “Dual Tasking Affects the Outcomes of Instrumented Timed up and Go, Sit-to-Stand, Balance, and 10-Meter Walk Tests in Stroke Survivors”, Sensors, 24(10), 2996.

  12. M. Abdollahi, E. Rashedi, P.M. Kuber, S. Jahangiri, B. Kazempour, M. Dombovy, N. Azadeh-Fard (2024), “Post-Stroke Functional Changes: In-depth Analysis of Clinical Tests and Motor-Cognitive Dual-Tasking by Wearable Sensors”, Bioengineering, 11(4), 349.

  13. M. Abdollahi, E. Rashedi, S. Jahangiri, P.M. Kuber, M. Dombovy, N. Azadeh-Fard (2024), “Fall Risk Assessment in Stroke Survivors: A Machine Learning Model Using Detailed Motion Data from Common Clinical Tests and Motor-Cognitive Dual-Tasking”, Sensors, 24(3), 812.

  14. S.S. Bhattathiri, A. Bogovik, M. Abdollahi, C. Hochgraf, M. Kuhl, A. Ganguly, A. Kwasinski, E. Rashedi (2024), “Unlocking Human-Robot Synergy: The Power of Intent Communication in Warehouse Robotics”, Applied Ergonomics, 117, 104248.

  15. S. Jahangiri, M. Abdollahi, R. Patil, E. Rashedi, N. Azadeh-Fard (2024), “An inpatient fall risk assessment tool: Application of machine learning models on intrinsic and extrinsic risk factors”, Machine Learning with Applications, 15, 100519.

  16. P.M. Kuber, E. Rashedi (2023), “Designing a New Forklift Backrest: Role of Adjustability in Improving Operator Comfort”, Ergonomics in Design, 31(4), 4-13.

  17. P.M. Kuber, E. Rashedi (2023), “Alterations in Physical Demands During Virtual/Augmented Reality-Based Tasks: A Systematic Review”, Annals of Biomedical Engineering, 51, 1910-1931.

  18. P.M. Kuber, M.M. Alemi, E. Rashedi (2023), “A Systematic Review on Lower-Limb Industrial Exoskeletons: Evaluation Methods, Evidence, and Future Directions”, Annals of Biomedical Engineering, 51, 1665-1682.

  19. E. Rashedi, K. Kathawala, M. Abdollahi, M.M. Alemi, M.I. Mokhlespour Esfahani, M.A. Nussbaum (2023), “Recovering from Laboratory-Induced slips and trips causes high levels of lumbar muscle activity and spine loading”, Journal of Electromyography and Kinesiology, 68, 102743.

  20. P.M. Kuber, E. Rashedi (2022), “Investigating effects of adjustability features in the design of forklift backrests: a pilot study”, International Journal of Human Factors and Ergonomics, 9 (4), 350-371.

  21. M. Abdollahi, N. Whitton, R. Zand, M. Dombovy, M. Parnianpour, K. Khalaf, E. Rashedi (2022), “A systematic review of fall risk factors in stroke survivors: towards improved assessment platforms and protocols”, Frontiers in Bioengineering and Biotechnology, 10, 910698.

  22. K. Thakur, P.M. Kuber, M. Abdollahi, E. Rashedi (2022), “Why multi-tier surgical instrument table matters? An ergonomic analysis from mento-physical demand perspectives”, Applied Ergonomics, 105, 103828.

  23. P.M. Kuber, M. Abdollahi, M.M. Alemi, E. Rashedi (2022), “A Systematic Review on Evaluation Strategies for Field Assessment of Upper-Body Industrial Exoskeletons: Current Practices and Future Trends”, Annals of Biomedical Engineering, 50 (10), 1203-1231.

  24. M. Abdollahi, P.M. Kuber, M. Shiraishi, R. Soangra, E. Rashedi, A. McKenzie (2022), “Kinematic Analysis of 360° Turning in Stroke Survivors Using Wearable Motion Sensors”, Sensors, 22 (1), 385.

  25. S. Karverkar, M. Abdollahi, E. Rashedi (2021), “Smartphone-based human fatigue level detection using machine learning approaches”, Ergonomics, 64 (5), 600-612.

  26. S. Hajifar, H. Sun, F.M. Megahed, L.A. Lones-Farmer, E. Rashedi, L.A. Cavuoto (2021), “A forecasting framework for predicting perceived fatigue: Using time series methods to forecast ratings of perceived exertion with features from wearable sensors”, Applied Ergonomics, 90, 103267.

  27. P.M. Kuber, E. Rashedi (2021), “Designing a New Forklift Backrest: Role of Adjustability in Improving Operator Comfort”, Ergonomics in Design.

  28. R. Soangra, V. Krishnan, J. John, E. Rashedi, A. McKenzie (2021), “Comparison of 360° Turn Cycles among Individuals after Stroke and Healthy Older Adults”, Applied Sciences, 11 (7), 3202.

  29. P.M. Kuber, E. Rashedi (2020), “Product ergonomics in industrial exoskeletons: potential enhancements for workforce efficiency and safety”, Theoretical Issues in Ergonomics Sciences, 1-24.

  30. M. Abdollahi, S. Ashouri, M. Abedi, N. Azadeh-Fard, M. Parnianpour, K. Khalaf, E. Rashedi (2020), “Using a Motion Sensor to Categorize Nonspecific Low Back Pain Patients: A Machine Learning Approach”, Sensors, 20 (10), 3600.

  31. M. Davoudi, S. M. Shokouhyan, M. Abedi, N. Meftahi, A. Rahimi, E. Rashedi, M. Hoviattalab, R. Narimani, M. Parnianpour, K. Khalaf (2020), “A Practical Sensor-Based Methodology for the Quantitative Assessment and Classification of Chronic Non Specific Low Back Patients (NSLBP) in Clinical Settings”, Sensors, 20 (10), 2902.

  32. M.I. Mokhlespour Esfahani, A. Akbari, O. Zobeiri, E. Rashedi, M. Parnianpour (2018), “Sharif-Human movement instrumentation system (SHARIF-HMIS): Development and validation”, Medical Engineering and Physics, 61: 87-94.

  33. H. Ehsani, J. Mohler, V. Marlinski, E. Rashedi, N. Toosizadeh (2018), “The influence of mechanical vibration on local and central balance control”, Journal of Biomechanics, 71: 59-66.

  34. S. Kim, M.A. Nussbaum, M.I. Mokhlespour, M.M. Alemi, S. Alabdulkarim, E. Rashedi (2018), “Assessing the influence of a passive, upper extremity exoskeletal vest for tasks requiring arm elevation: Part I – “Expected” effects on discomfort, shoulder muscle activity, and work task performance”, Applied Ergonomics, 70: 315-322.

  35. S. Kim, M.A. Nussbaum, M.I. Mokhlespour, M.M. Alemi, S. Alabdulkarim, B. Jia, E. Rashedi (2018), “Assessing the influence of a passive, upper extremity exoskeletal vest for tasks requiring arm elevation: Part II – "Unexpected" effects on shoulder motion, balance, and spine loading”, Applied Ergonomics, 70: 323-330.

  36. R. Soangra, H. Bhatt, E. Rashedi (2018), “Effects of Load Carriage and Surface inclination on linear and non-linear Postural Variability”, Safety Science, 110: 427-437.

  37. E. Rashedi, M.A. Nussbaum (2017), “Quantifying the history dependency of muscle recovery from a fatiguing intermittent task”, Journal of Biomechanics, 51: 26-31.

  38. M.I. Mokhlespour Esfahani, O. Zobeiri, A. Akbari, M. Abedi, E. Rashedi, M. Parnianpour (2017), “Trunk Motion System (TMS) Using Printed Body Worn Sensor (BWS) via Data Fusion Approach”, Sensors, 17 (1).

  39. S. Alabdulkarim, M.A. Nussbaum, E. Rashedi, S. Kim, M.J. Agnew, R. Gardner (2017). “Impact of Task Design on Task Performance and Injury Risk: Case Study of a Simulated Drilling Task”, Ergonomics, 60 (6):851-866.

  40. E. Rashedi, M.A. Nussbaum (2016). “Cycle time influences the development of muscle fatigue at low to moderate levels of intermittent muscle contraction”, Journal of Electromyography and Kinesiology, 28: 37-45.

  41. A.H. Eskandari, E. Sedaghat-Nejad, E. Rashedi, A. Sedighi, N. Arjmand, M. Parnianpour (2016). “The effect of parameters of equilibrium-based 3-D biomechanical models on extracted muscle synergies during isometric lumbar exertion”, Journal of Biomechanics, 49 (6):967-973.

  42. E. Rashedi, M.A. Nussbaum (2015). “Mathematical Models of Localized Muscle Fatigue: Sensitivity Analysis and Assessment of two Occupationally-Relevant Models”, PLOS ONE, 10 (12).

  43. E. Rashedi, M.A. Nussbaum (2015). “A Review of Occupationally-Relevant Models of Localized Muscle Fatigue”, International Journal of Human Factors Modelling and Simulation, 5 (1):1-80.

  44. N. Azadeh-Fard, A. Schuh, E. Rashedi, J.A. Camelio (2015). “Risk assessment of occupational injuries using Accident Severity Grade”, Safety Science, 76:160-167.

  45. E. Rashedi, S. Kim, M.J. Agnew, M.A. Nussbaum (2014). “Ergonomic Evaluation of a Wearable Assistive Device for Overhead Work”, Ergonomics, 57 (12):1864-1874.

  46. E. Rashedi, K. Khalaf, M.R. Nassajian, B. Nasseroleslami, and M. Parnianpour (2010). “How Does the Central Nervous System Address the Kinetic Redundancy in Lumbar Spine? Three-dimensional Isometric Exertions with 18 Hill-based Muscle Fascicles at L4/L5 Level”, Journal of Engineering in Medicine, 224 (3):487-501.

Published Conference Proceedings

  1. E. Rashedi* and P.M. Kuber (2025), “Evaluating Forecasting Model Accuracy in Predicting Fatigue Progression During Exoskeleton-Supported Tasks”, Institute of Industrial Engineering Annual Conference and Expo, Atlanta, GA.
  2. V. Sankhe*, E. Rashedi (2025), “Survey of AI-Based Tools for Enhancing Human Factors and Ergonomics in the Workplace”, Institute of Industrial Engineering Annual Conference and Expo, Atlanta, GA.
  3. B. Kazempour*, E. Rashedi (2025), “Exploratory Ergonomic Risk Assessment Using Smart Insoles and Computer Vision”, Institute of Industrial Engineering Annual Conference and Expo, Atlanta, GA.
  4. P. Gulia*, A. Ganguly, A. Kwasinski, M.E. Kuhl, E. Rashedi, C. Hochgraf (2024) “Automated Warehouse 5G Infrastructure Modeling Using Variational Autoencoders”, 2024 International Symposium on Networks, Computers and Communications (ISNCC), Washington, DC.
  5. P.M. Kuber and E. Rashedi* (2024) “Effects of Exoskeletons on Low-Back Muscular Demands During Unloaded Intermittently Performed Bending Tasks”, Institute of Industrial Engineering Annual Conference and Expo, Montreal, Canada.
  6. P.M. Kuber and E. Rashedi* (2024) “How Do Exoskeletons Affect Balance During Intermittently Performed Sustained Bending Tasks?” Institute of Industrial Engineering Annual Conference and Expo, Montreal, Canada.
  7. P.M. Kuber* and E. Rashedi (2024) “How Do Exoskeletons Affect Back and Leg Muscular Demands During Repetitive Trunk Bending?” Proceedings of the Human Factors and Ergonomics Society Annual Meeting, Los Angeles, CA.
  8. P.M. Kuber*, A.R. Kulkarni, and E. Rashedi (2024) “Predicting Perceived Back Fatigue During Exoskeleton Supported Trunk Bending Tasks using Machine Learning” Proceedings of the Human Factors and Ergonomics Society Annual Meeting, Los Angeles, CA.
  9. E. Rashedi*, M.A. Nussbaum, K. Kathawala, M. Abdollahi, M.M. Alemi, M.I. Mokhlespour Esfahani (2023), “Recovery Efforts from Unexpected slips and trips Induced Substantial Low Back Loads”, Slips, Trips, and Falls International Conference, Toronto, Canada.
  10. E. Rashedi*, S. Jahangiri, M. Abdollahi, R. Patil, N. Azadeh-Fard (2023) “Developing a Risk Assessment Tool for Patients’ In-Hospital Falls Using Machine Learning Methods, Slips, Trips, and Falls International Conference, Toronto, Canada.
  11. S.S. Bhattathiri, A. Bogovik, M. Abdollahi, C. Hochgraf, M. Kuhl, A. Ganguly, A. Kwasinski, E. Rashedi* (2023). “Towards Improving the Human-Robot Communication in Intelligent Materials Handling Environments”, Institute of Industrial Engineering Annual Conference and Expo, New Orleans, LA.
  12. P.M. Kuber, E. Rashedi* (2023). “Understanding Differences in Muscular & Perceived Demands During Exoskeleton Use in Intermittent Bending”, Institute of Industrial Engineering Annual Conference and Expo, New Orleans, LA.
  13. P.M. Kuber, E. Rashedi* (2023). “Can Using Virtual and Augmented Reality Devices Cause Variations in Task Physical Demands?”, Institute of Industrial Engineering Annual Conference and Expo.
  14. M. Abdollahi *, P.M. Kuber, M. Pierce, K. Cristales, M. Dombovy, J. LaLonde, E. Rashedi (2023). “Motor-Cognitive Dual-Task Paradigm Affects Timed Up & Go (TUG) Test Outcomes in Stroke Survivors”, 11th International IEEE/EMBS Conference on Neural Engineering (NER), Baltimore, MD.
  15. M. B. Rouchi, M. Davoudi*, N. Meftahi, E. Rashedi, K. Khalaf, M. Parnianpour (2023) “Assessment of the lumbar muscle co-contraction in trunk flexion and bending movements at different velocities, using time-varying muscle synergies”, Gait & Posture, 100, 86-86.
  16. E. Rashedi*, P.M. Kuber, G. Millington, M. Abdollahi (2022). “Do we have an agreement on the impact of exoskeletons between the Lab- and Field-based studies?”, Institute of Industrial Engineering Annual Conference and Expo, Seattle, WA.
  17. E. Rashedi*, K. Thakur, P.M. Kuber, M. Abdollahi (2022). “Why Multi-Tier Surgical Instrument Table Matters? An Ergonomic Analysis from Mento-Physical Demand Perspectives”, Institute of Industrial Engineering Annual Conference and Expo, Seattle, WA.
  18. T. Bragg*, E.M. Rantanen, J.M. Pelletier, E. Rashedi (2022). “Cognitive Engineering Modeling of Phishing”, In Proceedings of the HFES 66th International Annual Meeting, Atlanta, GA.
  19. M. Abdollahi*, P.M. Kuber, M. Shiraishi, R. Soangra, E. Rashedi (2022). “Can A Single Motion Sensor Identify Lower Limb Movement Alterations Among Stroke Survivors?”, International Stroke Conference, 53, ATP61.E.
  20. P.M. Kuber, E. Rashedi (2021). “Towards Reducing Risk of Injury in Nursing: Design and Analysis of a New Passive Exoskeleton for Torso Twist Assist”, International Symposium on Human Factors and Ergonomics in Health Care, 10 (1), 217-222.
  21. K. Thakur, P.M. Kuber, M. Abdollahi, D. Wenker, M. Kandrikar, E. Rashedi (2021). “Assessing the Ergonomic Design of a New Back Table for Perioperative Nurses”, International Symposium on Human Factors and Ergonomics in Health Care, 10 (1), 131-136.
  22. A. Uniyal, P.M. Kuber, A. Lobos, M. Magyar, E. Rashedi (2021). “Development of a New Reusable and User-Centric General-Use Mask for Averting Respirator Supply Crisis in the Healthcare Sector”, International Symposium on Human Factors and Ergonomics in Health Care, 10 (1), 188-193.
  23. M. Abdollahi, P.M. Kuber, C. Hoang, M. Shiraishi, R. Soangra, E. Rashedi (2021) “Comparing the Kinematics of Stroke Survivors and Healthy Individuals in a 360-degree Turning Task Using Inertial Measurement Units (IMU)”, 26th Congress of the European Society of Biomechanics.
  24. M. Abdollahi, P.M. Kuber, C. Hoang, M. Shiraishi, R. Soangra, E. Rashedi (2021) "Kinematic Assessment of Turning and Walking Tasks Among Stroke Survivors by Employing Wearable Sensors and Pressure Platform." 43rd Annual International Conference of the IEEE Engineering in Medicine & Biology Society (EMBC), pp. 6635-6638.
  25. N.S. Nugent*, J.B. Majeski, R. Choe, E. Rashedi (2020). “Investigating the effect of fatigue on muscle microvasculature blood flow during intermittent isometric contraction”, IEEE Engineering in Medicine and Biology Conference.
  26. PM Kuber, E Rashedi, (2020), "Preparing Future Human Factors Engineers for Developing Ergonomic Products using Computer Aided Design and Prototyping", ASEE St. Lawrence Section Annual Conference Proceedings.
  27. PM Kuber, E Rashedi, (2020), “Assessing the Ergonomic Benefits of a New Adjustable Forklift Backrest.” In Proceedings of the HFES 64th International Annual Meeting.
  28. K. Thakur*, P. Kuber, M. Abdollahi, E. Rashedi (2020). “Assessing the ergonomic design of a new back table for perioperative nurses”, Annual International Occupational Ergonomics and Safety Conference.
  29. M. Abdollahi*, S. Ashouri, M. Abedi, N. Azadeh-Fard, M. Parnianpour, E. Rashedi (2020), “Improving the Process of Assigning Low Back Pain Patients to the Treatment Paths: Toward an Objective Clinical Decision: A Machine Learning Approach”, Healthcare Systems Process Improvement.
  30. S. Karvekar*, M. Abdollahi, E. Rashedi (2019), “A Data-Driven Model to Identify Fatigue Level Based on the Motion Data from a Smartphone”, IEEE Western New York Image and Signal Processing.
  31. S. Karvekar, M. Abdollahi*, E. Rashedi (2019), “Smartphone-based Human Fatigue Detection for Daily Activities Using Gait Analysis”, Applied Human Factors and Ergonomics, pp.1-5.
  32. E. Rashedi*, M. Abdollahi, S. Ashouri, M. Abedi, F.D. Manshadi, M. Parnianpour (2019), “Classification of LBP Patients Using an IMU Signal and Machine Learning Approaches”, Annual Meetings of American Society of Biomechanics.
  33. S. Jadeja*, E. Rashedi (2018), “Influence of Cognitive Loads on Fatigue Development and Recovery”, Institute of Industrial Engineering Annual Conference and Expo.
  34. K. Katawala*, M. Abdollahi, M. Alemi, M.I. Mokhlespour Esfahani, E. Rashedi (2018), “Effects of Slip and Trip on Low Back and the Resulting Lumbar Muscle Activity, Low Back Loads”, Institute of Industrial Engineering Annual Conference and Expo.
  35. M. Luster*, R. Soangra, E. Rashedi (2018), “Effect of Back Fatigue on Gait and Propensity of Slip”, Institute of Industrial Engineering Annual Conference and Expo.
  36. A. Shaik*, E. Rashedi (2018), “Effects of Exertion Variability on the FDI Muscle Fatigue during Intermittent Contractions”, Institute of Industrial Engineering Annual Conference and Expo.
  37. M. Luster*, E. Rashedi (2018), “Investigating the Effect of Low Back Fatigue on Human Balance and the Risk of Slip”, 26th Annual CSTEP Statewide Student Conference.
  38. M.I. Mokhlespour Esfahani, M. Alemi*, S. Kim, E. Rashedi, B. Jia, M.A. Nussbaum (2017). “Effects of an Occupational Wearable Assistive Device on Low Back Loads”, Proceedings of the American Society of Biomechanics Annual Meeting, Boulder, CO.
  39. M. Alemi*, M.I. Mokhlespour Esfahani, S. Kim, E. Rashedi, M.A. Nussbaum (2017). “Assessing Slip and Trip Risk when Wearing Upper-Extremity Exoskeleton”, Proceedings of the American Society of Biomechanics, Boulder, CO.
  40. E. Rashedi*, R. Soangra, T.E. Lockhart, M.A. Nussbaum (2016). “Effects of Plantarflexor Muscle Fatigue on Gait Characteristics”, Proceedings of the American Society of Biomechanics.
  41. E. Rashedi*, M.A. Nussbaum (2016). “History dependency of muscle strength recovery from a fatiguing intermittent task”, Proceedings of the Human Factors and Ergonomics Society, 60 (1), pp. 992.
  42. E. Rashedi*, M.A. Nussbaum (2016). “Cycle time influences the development of muscle fatigue at low to moderate levels of intermittent muscle contraction”, 7th Applied Human Factors and Ergonomics Meeting.
  43. S. Abdulkarim*, M.A. Nussbaum, E. Rashedi, S. Kim, M. Agnew (2016), “Impact of Task Design on Productivity and Quality”, Proceedings of the Human Factors and Ergonomics Society, pp. 906-907.
  44. E. Rashedi*, H. Bhatt, M.A. Nussbaum (2015). “Effects of Load Carriage and Surface Inclination on Slip and Trip Risks”, Proceedings of the American Society of Biomechanics.
  45. E. Rashedi*, and M.A. Nussbaum (2015). “Occupationally-Relevant Models of Localized Muscle Fatigue: Review, Comparison, and Future Directions”, Institute of Industrial Engineering Annual Conference and Expo.
  46. E. Rashedi*, M. Parnianpour, M. Asgari, H.R. Mokhtarnia, M.A. Sanjari, S. Moieni (2014). “The Effect of Speed on Kinematic Variability and Dynamic Stability of Upper Body in Healthy and Low Back Pain Patient during Repetitive Flexion Extension Movements”, 17th U.S. national Congress on Theoretical and Applied Mechanics.
  47. E. Rashedi*, S. Kim, M.A. Nussbaum, M.J. Agnew (2013). “Effects of using an assistive device for overhead work”, Proceedings of American Society of Biomechanics, 37(1):214-215.
  48. E. Rashedi*, S. Kim, M.A. Nussbaum, M.J. Agnew (2013). “Effects of using an assistive device for manufacturing tasks”, 27th Annual Professional Development Conference & Student Research Forum of Region VI American Society of Safety Engineers.
  49. E. Rashedi*, B. Jia, M.A. Nussbaum, T.H. Lockhart (2012). “Investigating the Effects of Slipping on Lumbar Muscle Activity, Kinematics, and Kinetics”, Proceedings of the Human Factors and Ergonomics Society, 56(1):1201-1205.
  50. B. Jia*, M.A. Nussbaum, S. Kim, and E. Rashedi (2011). “Effects of reducing the number of inputs on EMG-based model estimates of lumbar spine biomechanics”, Proceedings of the XXIIIrd Annual International Occupational Ergonomics and Safety Conference.
  51. E. Rashedi*, A.R. Mirbagheri, B. Taheri, G.R. Vossoughi, F. Farahmand and M. Parnianpour (2009). “Design and Development of a Hand Robotic Rehabilitation Device for Post Stroke Patients”, International Conference of the IEEE EMBS, 31:5026-5029.