MECHANICAL ENGINEERING
To view listing from a different department, select department name from the right.Wael Abdel Samad
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Published Conference Proceedings
Alshaya, A., W. A. Samad, and R. Rowlands. "Desirable Features of Processing DIC Date with a Stress Function." Proceedings of the International Digital Image Correlation Society conference, November 7-10, Philadelphia, PA. Ed. Michael A. Sutton. Piladelphia, PA: n.p., Web. *
Shehata, M., T. M. Hatem, and W. A. Samad. "EXPERIMENTAL STUDY OF BUILD ORIENTATION IN DIRECT METAL LASER SINTERING OF 17-4PH STAINLESS STEEL." Proceedings of the International Symposium on Plasticity, Big Island, Hawaii, January 3-9, 2016. Ed. Akhtar S. Khan. Keauhou Bay, Hawaii: n.p., Web. *
Samad, W. A. and J. Considine. "Sensitivity Analysis of Hybrid Thermoelastic Techniques." Proceedings of the Society of Experimental Mechanics International Congress & Exhibition, Jun 6, 2016, Orlando, FL. Ed. Springer. Orlando, Florida: Springer, Print. *
Margaret Bailey
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Published Conference Proceedings
Mason, Sharon, et al. "Advocates & Allies: Engaging More Men in Institutional Transformation." Proceedings of the 2016 ACM & Anita Borg Grace Hopper Celebration of Women in Computing. Ed. ACM. Houston, TX: n.p., 2016. Web. *
Dell, Elizabeth, et al. "Connectivity at RIT-Developing and Delivering an Effective Professional Development Workshop Series for Women Faculty in STEM." Proceedings of the 2016 ASEE Annual Conference and Exposition. Ed. ASEE. New Orleans, LA: n.p., 2016. Web. «
Gunderson, Kate, Margaret B. Bailey, and Jamie Ladge. "The Effect of Cooperative Education on Retention of Engineering Students & the Transition to Full-Time Employment." Proceedings of the 2016 ASEE Annual Conference and Exposition. Ed. ASEE. New Orleans, LA: n.p., 2016. Web. «
Marchetti, Carol and Margaret B. Bailey. "Into the Light: Diffusing Controversy and Increasing Transparency in the Faculty Salary Equity Study Process." Proceedings of the 2016 ASEE Annual Conference and Exposition. Ed. ASEE. New Orleans, LA: n.p., 2016. Web. «
Invited Keynote/Presentation
Bailey, Margaret B., Elizabeth Dell, and Carol Marchetti. "AdvanceRIT: Reimaging our Careers and Campus Culture." AAUW Regional Conference. American Association of University Women. Rochester, New York. 29 Oct. 2016. Address.
Bailey, Margaret B. "Commencement Address to Graduates." 27th Annual Graduation. The South Carolina’s Governor’s School for Science and Mathematics. Hartsville, SC. 28 Apr. 2016. Keynote Speech.
Stephen Boedo
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Journal Paper
Boedo, S. and D.P. Anderson. "Oscillating Journal Bearings under Steady Load: A Numerical Study of Limiting Cases." ASME Journal of Tribology 138. (2016): p. 014502. Print. *
Boedo, S. and J.F. Booker. "Warner-Sommerfeld Impedance and Mobility Maps." ASME Journal of Tribology 138. (2016): p. 034502. Print. *
Holzenkamp, M., et al. "Seeded Fault Testing and Classification of Dynamically-Loaded Floating Ring Compressor Bearings." ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems Part B: Mechanical Engineering 2. (2016): p. 021003. Print. *
Ke Du
Research Assistant Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Journal Paper
Mel, Abdel-Aziz El, et al. "Galvanic Replacement Reaction: A Route to Highly Ordered Bimetallic Nanotubes." The Journal of Physical Chemistry C. (2016): 17652-17659. Print. *
Mel, Abdel-Aziz El, et al. "Controlling the Formation of Nanocavities in Kirkendall Nanoobjects through Sequential Thermal Ex Situ Oxidation and In Situ Reduction Reactions." Small. (2016): 2885-2892. Print. *
Chauvin, Adrien, et al. "Planar Arrays of Nanoporous Gold Nanowires: When Electrochemical Dealloying Meets Nanopatterning." ACS Applied Materials and Interfaces. (2016): 6611-6620. Print. *
Thiry, Damien, et al. "The Kirkendall Effect in Binary Alloys: Trapping Gold in Copper Oxide Nanoshells." Chemistry of Materials. (2015): 6374-6384. Print. *
Alfonso Fuentes Aznar
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Journal Paper
Fuentes-Aznar, Alfonso, Ramon Ruiz-Orzaez, and Ignacio Gonzalez-Perez. "Comparison of Spur, Helical and Curvilinear Gear Drives by means of Stress and Tooth Contact Analyses." Meccanica. (2016): 1-18. Print. «
Fuentes-Aznar, Alfonso and Ignacio Gonzalez-Perez. "Mathematical Definition and Computerized Modeling of Spherical Involute and Octoidal Bevel Gears Generated by Crown Gear." Mechanism and Machine Theory 106. (2016): 94-114. Print. «
Book Chapter
Fuentes-Aznar, Alfonso. "Prof. Faydor L. Litvin: A Life Dedicated to the Development of the Modern Theory of Gearing." Theory and Practice of Gearing and Transmissions. Ed. Veniamin Goldfarb and Natalya Barmina. : Springer International Publishing, 2016. 1-17. Print. ∆
Fuentes-Aznar, Alfonso, Ramon Ruiz-Orzaez, and Ignacio Gonzalez-Perez. "Compensation of Errors of Alignment Caused by Shaft Deflections in Spiral Bevel Gear Drives." Theory and Practice of Gearing and Transmissions. Ed. Veniamin Goldfarb and Nathalya Barmina. : Springer International Publishing, 2016. 301-319. Print. ∆
Published Conference Proceedings
Fuentes-Aznar, Alfonso, et al. "Fillet Geometry Modeling for Nongenerated Gear Tooth Surfaces." Proceedings of the International Conference on Power Transmissions 2016 (ICPT 2016). Ed. Datong Qin, Yimin Shao. Chongqing, China: Taylor and Francis Group, 2016. Print. *
Fuentes-Aznar, Alfonso, Ignacio Gonzalez-Perez, and Harish K. Pasapula. "Computerized Design of Straight Bevel Gears with Optimized Profiles for Forging, Molding, or 3D Printing." Proceedings of the AGMA Fall Technical Meeting. Alexandria, VA: American Gear Manufacturers Association, 2016. Print. «
Gonzalez-Perez, Ignacio, Miguel Martinez-Diaz, and Alfonso Fuentes-Aznar. "Diseño e Impresion de Modelos 3D de Transmisiones Epicicloidales para Ayuda a la Docencia." Proceedings of the XXI Congreso Nacional de Ingenieria Mecanica. Ed. Emilio Velasco-Sanchez. Elche, Spain: Asociacion Española de Ingenieria Mecanica, 2016. Print. *
Stringer, Brian, et al. "Effect of Cutting Conditions on Dimensional Accuracy and Surface Roughness in Traditional Milling of Steel." Proceedings of the ASME 2016 International Mechanical Engineering Congress & Exposition. Ed. Unkown. Phoenix, AZ: ASME, 2016. Print. *
Shows/Exhibits/Installations
Fuentes-Aznar, Alfonso. Computational Tools for Advanced Gear Design. 7 Apr. 2016. 16th Annual University Technology Showcase, Rochester. Exhibit.
Journal Editor
Fuentes-Aznar, Alfonso, ed. Mechanism and Machine Theory. Amsterdam, Netherlands: Elsevier, 2017. Print.
Hany Ghoneim
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Journal Paper
Kumar, N and Ghoneim H. "Damping Factor Estimation of a Flexi-ble-Matrix-Composite Body Pump." Journal of Materials Science and Chemical Engineering 4. (2016): 59-66. Print. «
Yin, Zhen and Ghoneim H. "A Novel Compliant-Body Pump with a High Volumetric Efficiency." Composite Structures 153. (2016): 578-584. Print. «
Amitabha Ghosh
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Published Conference Proceedings
Ghosh, Amitabha. "Foundations of Statics - an Assessment Study and Feedback Implementation." Proceedings of the 2016 ASME International Mechanical Engineering Congress and Exposition, November 11-17, Phoenix, Arizona, USA. Ed. ASME. Phoenix, Arizona, USA, AZ: n.p., Print. £
Ghosh, Amitabha. "Formative Assessment using Multiple Choice Questions in Statics and Dynamics." Proceedings of the 2016 ASME International Mechanical Engineering Congress and Exposition, November 11-17, Phoenix, Arizona, USA. Ed. ASME. Phoenix, AZ: n.p., Print. £
Surendra Gupta
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Journal Paper
Abdulal, E. A., et al. "Surface Modification of PEN Treated with Ozone and UV Photooxidation." Surface Innovations 4. 1 (2016): 39-47. Print. «
Li, Xinyun, et al. "Vacuum UV Photo-oxidation of Polystyrene." Journal of Adhesion Science and Technology 30. 20 (2016): 2212-2223. Web. «
Published Conference Proceedings
Gupta, S. K., et al. "Performance of Engineering and Engineering Technology Scholars in the Transfer Pipeline Program." Proceedings of the ASEE 123rd Annual Conference. Ed. American Society for Engineering Education. New Orleans, LA: American Society for Engineering Education, 2016. Web. «
Edward Hensel Jr.
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Journal Paper
Robinson, R. J., et al. "Week Long Topography Study of Young Adults Using Electronic Cigarettes in Their Natural Environment." PLOS ONE 11. 10 (2016): 31. Web. *
Published Conference Proceedings
Hensel, E. C. and R. J Robinson. "Case Study: A Career Development Program for New Engineering Faculty." Proceedings of the 14th LACCEI International Multi-Conference for Engineering, Education, and Technology: “Engineering Innovations for Global Sustainability”. Ed. Cecilia A. Paredes V., Ph.D. San José, Costa Rica: LACCEI, 2016. Web. *
Lee, Y. O., et al. "Variation in Vaping: Examining Daily ENDS Puff Topography Among Established and Non-established Cigarette Smokers." Proceedings of the NIHTRCS Tobacco Regulatory Science Conference. Ed. NIH. Bethesda, MD: NIH, 2016. Web. *
Invited Article/Publication
Robinson, R. J., et al. "E-Cigarette Vaping: Preclinical And Clinical Pulmonary Health Effects." American Thoracic Society, 2016 International Conference. (2016). Print. *
Patricia Iglesias Victoria
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Journal Paper
Janardhanan, Karthik and Patricia Iglesias. "Theoretical and Experimental Study of the Friction Behavior of Halogen-Free Ionic Liquids in Elastohydrodynamic Regime." Lubricants Nanoparticles and Ionic Liquids in Lubrication special issue-4. 2 (2016): 1-12. Web. «
Gutierrez, M.A., M. Haselkorn, and Patricia Iglesias. "The Lubrication Ability of Ionic Liquids as Additives for Wind Turbine Gearboxes." Lubricants 4. 2 (2016): -. Web. «
Cigno, E., et al. "Lubricating Ability of Two Phosphonium-based Ionic Liquids as Additives of a Bio-oil for use in Wind Turbines Gearboxes-in Press." Wear. 2017 WOM Special issue (2016): -. Web. «
Published Conference Proceedings
Fuentes, A., et al. "Fillet Geometry Modeling for Nongenerated Gear Tooth Surfaces." Proceedings of the International Conference on Power Transmissions ICPT 2016. Ed. Datong Qin. Chongqing, China: n.p., Print. «
Bain, D., et al. "Synthetic and Organic Supercharger Lubrication: The Tribological Performance of Ionic Liquids as Additives to Lubricants." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016. Ed. ASME. Phoenix, Az: n.p., Web. «
Bossung, K., et al. "Effect of Halogen-free Ionic Lliquids as Additives of Biolubricants for Room Temperature Titanium-steel Contact." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016. Ed. ASME. Phoenix, Az: n.p., Web. «
Matczak, L., et al. "Characterization of Novel High Performance Lubricants." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016. Ed. ASME. Phoenix, Az: n.p., Web. «
Stringer, B., et al. "Effect of Cutting Conditions on Dimensional Accuracy and Surface Roughness in Traditional Milling of Steel." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016. Ed. ASME. Phoenix, Az: n.p., Web. «
Kudtarkar, K.A., et al. "Microfluidic Synthesis of Polymer Ionic Liquid Gel Beads for Energy Harvesting Applications." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016. Ed. ASME. Phoenix, Az: n.p., Web. «
Shows/Exhibits/Installations
Iglesias, Patricia. Tribology Laboratory at Kate Gleason College of Engineering. n.d. CEIS University Technology Showcase 2016, Rochester. Exhibit. ˜
Invited Keynote/Presentation
Iglesias, Patricia, et al. "Prediction of the Frictional Properties of Halogen-free Ionic Liquids in Elastohydrodynamic Contacts." 2016 STLE Tribology Frontiers Conference,. STLE. Chicago, Ill. 13 Nov. 2016. Conference Presentation. *
Iglesias, Patricia, et al. "Phosphonium-based Ionic Liquids as Additives of Mineral Oils in Steel-steel Contacts." 2016 STLE Tribology Frontiers Conference,s. STLE. Chicago, Ill. 13 Nov. 2016. Conference Presentation. *
Satish Kandlikar
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Journal Paper
Shah, M. M. and Satish G. Kandlikar. "Water Emergence from the Land Region and Water-sidewall Interactions in Proton Exchange Membrane Fuel Cell Gas Channels with Microgrooves." Journal of Power Sources 297. (2015): 127-139. Web.
Protich, Z., et al. "Electrochemical Deposition of Copper in Graphene Quantum Dot Bath: Pool Boiling Enhancement." Journal of Electrochemical Society 163. 6 (2016): E166-E172. Web.
Koz, Mustafa and Satish G. Kandlikar. "Oxygen Transport Resistance at Gas Diffusion Layer — Air Channel Interface with Film Flow of Water in a Proton Exchange Membrane Fuel Cell." Journal of Power Sources 302. (2016): 331-342. Web.
Jaikumar, Arvind and Satish G. Kandlikar. "Pool Boiling Enhancement Through Bubble Induced Convective Liquid Flow in Feeder Microchannels." Applied Physics Letters 108. 4 (2016): 41604. Web.
Kandliar, Satish G. "Mechanistic Considerations for Enhancing Flow Boiling Heat Transfer in Microchannels." Journal of Heat Transfer 138. 2 (2016): 21504. Web.
Buchling, Philipp and Satish G. Kandlikar. "Enhanced Flow Boiling of Ethanol in Open Microchannels With Tapered Manifolds in a Gravity-Driven Flow." Journal of Heat Transfer 138. 3 (2016): 31503. Web.
Raghupathi, Pruthvik A. and Satish G. Kandlikar. "Contact Line Region Heat Transfer Mechanisms for an Evaporating Interface." International Journal of Heat and Mass Transfer 95. (2016): 296-306. Web.
Gonzalez-Hernandez, Jose-Luis, Satish G. Kandlikar, and Abel Hernandez-Guerrero. "Performance Assessment Comparison of Variable Fin Density Microchannels With Offset Configurations." Heat Transfer Engineering. 16 (2016): 1-13. Web.
Raghupathi, Pruthvik A. and Satish G. Kandlikar. "Bubble Growth and Departure Trajectory Under Asymmetric Temperature Conditions." International Journal of Heat and Mass Transfer 95. (2016): 824-832. Web.
Jaikumar, Arvind and Satish G. Kandlikar. "Ultra-high Pool Boiling Performance and Effect of Channel Width with Selectively Coated Open Microchannels." International Journal of Heat and Mass Transfer 95. (2016): 795-805. Web.
Tí¼rkakar, Gí¶ker and Satish G. Kandlikar. "Entropy Generation Analysis of a Microchannel-condenser for use in a Vapor Compression Refrigeration Cycle." International Journal of Refrigeration 70. (2016): 71-83. Web.
Perez-Raya, Isaac and Satish G. Kandlikar. "Numerical Modeling of Interfacial Heat and Mass Transport Phenomena During a Phase Change Using ANSYS-Fluent." Numerical Heat Transfer Fundamentals 70. 4 (2016): 322-339. Web.
Jaikumar, Arvind, Satish G. Kandlikar, and Anju Gupta. "Pool Boiling Enhancement through Graphene and Graphene Oxide Coatings." Heat Transfer Engineering. (2016): 0. Web.
Raghupathi, Pruthvik A. and Satish G. Kandlikar. "Characterization of Pool Boiling of Seawater and Regulation of Crystallization Fouling by Physical Aberration." Heat Transfer Engineering. (2016): 0. Web.
Kandliar, Satish G. "Enhanced Macro-convection Mechanism with Separate Liquid-Vapor Pathways to Improve Pool Boiling Performance." Journal of Heat Transfer. (2016): n/a. Web.
Kandliar, Satish G, Jose-Luis Gonzalez-Hernandez, and Abel Hernandez-Guerrero. "Performance Assessment Comparison of Variable Fin Density Microchannels With Offset Configurations." Heat Transfer Engineering 31. 16 (2016): 1-13. Web. *
Buchling, Philipp and Satish G. Kandlikar. "Enhanced Flow Boiling of Ethanol in Open Microchannels With Tapered Manifolds in a Gravity-Driven Flow." Journal of Heat Transfer 138. 3 (2016): 31503. Web. *
Kandliar, Satish G. "Mechanistic Considerations for Enhancing Flow Boiling Heat Transfer in Microchannels." Journal of Heat Transfer 138. 2 (2016): 21504. Web. *
Book Chapter
Perez-Raya, I. and Satish G. Kandlikar. "Evaporation on a Planar Interface Numerical Simulation and Theoretical Analysis of Heat and Mass Transport Processes." Advances in Heat Transfer, Vol 48. Radarweg, NX Amsterdam, The Netherlands: Elsevier Science and Technology, 2016. 1-66. Print.
Kandlikar, Satish G. "Boiling." Multiphase flow handbook. Ed. Michaelides, Crowe, and Schwarzkopf. Boca Raton, FL: Taylor and Francis Group, 2016. 559-604. Print.
Published Conference Proceedings
Recinella, Alyssa, Ankit Kalani, and Satish G. Kandlikar. "Enhanced Flow Boiling Heat Transfer Using Radial Microchannels." Proceedings of the ASME 14th International Conference in Nanochannels Microchannels Minichannels. Washington DC, Washington DC: n.p., 2016. Web.
Buchling, Philipp and Satish G. Kandlikar. "Vapor Chamber Forced Convection Cooling Using Flow Boiling in Open Microchannels and Tapered Manifolds." Proceedings of the 15th IEEE Intersociety Conference on Thermal and Termomechanical Phenomena in Electronic Systems (ITherm). New York, NY: IEEE, 2016. Web.
Recinella, Alyssa, et al. "Design of an Experimental Setup to Investigate an Oscillating and Evaporating Meniscus Using a Feedback Control Loop." Proceedings of the ASME ICNMM 2016 Conference. Washington DC, Washington DC: ASME, 2016. Web.
Jaikumar, Arvind, Anju Gupta, and Satish G. Kandlikar. "Dip Coating of Electrochemically Generated Graphene and Graphene Oxide Coatings to Enhance Pool Boiling Performance." Proceedings of the Proceedings of the ASME 14th International Conference in Nanochannels Microchannels Minichannels HTFEICNMM2016 Conference, July 10-14. Washington DC, Washington DC: ASME, 2016. Web.
Raghupathi, Pruthvik A. and Satish G. Kandlikar. "Preliminary Results of Pool Boiling of Seawater." Proceedings of the Proceedings of the ASME 14th International Conference in Nanochannels Microchannels Minichannels HTFEICNMM2016 Conference, July 10-14. Washington DC, Washington DC: ASME, 2016. Web. *
Perez-Raya, Isaac and Satish G. Kandlikar. "Modeling of Evaporation Phenomenon Considering Liquid and Vapor Phase Conduction Effects: Stefan Problems." Proceedings of the Liquid and Vapor Phase Conduction Effects: Stefan Problems”, Proceedings of the ASME 14th International Conference in Nanochannels Microchannels Minichannels HTFEICNMM2016 Conference, July 10-14. Washington DC, Washington DC: n.p., 2016. Web. *
Gupta, Anju, Arvind Jaikumar, and Satish G. Kandlikar. "Characterization of Effects of Systematically Increased Graphene Dip coating Durations on the Surface Morphology." Proceedings of the AIChE Annual Meeting. San Francisco, CA: n.p., 2016. Web. *
Gupta, Anju and Satish G. Kandlikar. "Pool Boiling Enhancement through Graphene and Graphene Oxide Coatings." Proceedings of the International Workshop on New Understanding in Nanoscale/Microscale Phase Change Phenomena, Norwegian University of Science and Technology,. Trondheim, Norway: n.p., 2016. Web. *
Gupta, Anju and Satish G. Kandlikar. "Effects of Dip Coating Duration on Surface Morphology and Pool Boiling Enhancement." Proceedings of the International Conference on Material Sciences. Coimbatore, India: n.p., 2016. Web. *
Invited Keynote/Presentation
Kandlikar, Satish G. "Mechanistic Considerations for Enhancing Flow Boiling Heat Transfer in Microchannels." Micro Thermal Systems (MTS) Group. Department of Mechanical Engineering, National University of Singapore. , Singapore. 1 Jan. 2016. Guest Lecture. *
Kandlikar, Satish G. "Shifting Enhancement Paradigms through Nano-Microscale Surface Modification in Pool Boiling." Micro/Nanoscale Heat and Mass Transfer International Conference. J. Heat and Transfer. New York, NY. 5 Jan. 2016. Guest Lecture. *
Kandlikar, Satish G. "New Paradigm in Microchannel Heat Transfer." National Technical University. , Singapore. 21 Jan. 2016. Guest Lecture. *
Kandlikar, Satish G. "Focus on Fundamentals of Interfacial Transport Phenomena." International Workshop on New Understanding in Nanoscale/Microscale Phase Change. Norwegian University of Science and Technology. Trondheim, Norway. 13 Jun. 2016. Guest Lecture. *
Perez, Isaac and Satish G. Kandlikar. "Simulating Interfacial Evaporation using Commercial Codes." International Workshop on New Understanding in Nanoscale/Microscale Phase Change. Norwegian University of Science and Technology. Trondheim, Norway. 13 Jun. 2016. Guest Lecture. *
Kandlikar, Satish G. "Interfacial Transport Phenomena — Future Research Directions." International Workshop on New Understanding in Nanoscale/Microscale Phase Change. Norwegian University of Science and Technology. Trondheim, Norway. 13 Jun. 2016. Guest Lecture. *
Kandlikar, Satish G. "Effective Communication — Overview." Norwegian University of Science and Technology. Trondheim, Norway. 19 Oct. 2016. Guest Lecture. *
Kandlikar, Satish G. "Effective Communication — Ground Rules." Norwegian University of Science and Technology. Trondheim, Norway. 20 Oct. 2016. Guest Lecture.
Kandlikar, Satish G. "Effective Communication — Writing Technical Paper." Norwegian University of Science and Technology. Trondheim, Norway. 20 Oct. 2016. Guest Lecture.
Kandlikar, Satish G. "Effective Communication — Technical Presentation." Norwegian University of Science and Technology. Trondheim, Norway. 20 Oct. 2016. Guest Lecture.
Kandlikar, Satish G. "Proposal Writing Guidelines." Norwegian University of Science and Technology. Trondheim, Norway. 20 Oct. 2016. Guest Lecture.
Kandlikar, Satish G., Arvand Jaikumar, and Anju Gupta. "Dip Coating of Electrochemically Generated Graphene and Graphene Oxide Coatings to Enhance Pool Boiling Performance." Proceedings of the ASME 14th International Conference in Nanochannels Microchannels Minichannels HTFEICNMM2016 Conference. ASME. Washington DC, Washington DC. 10-14 Jul. 2016. Conference Presentation.
RaghupathI, Pruthvik A. and Satish G. Kandlikar. "Preliminary Results of Pool Boiling of Seawater." Proceedings of the ASME 14th International Conference in Nanochannels Microchannels Minichannels HTFEICNMM2016 Conference. ASME. Washington DC, Washington DC. 10-14 Jul. 2016. Conference Presentation.
Recinella, Alyssa and Satish G. Kandlikar. "“Enhanced Flow Boiling Heat Transfer Through Radial Heat Flux Dissipation of ~1kW/cm2 using Radial Microchannels and Offset Strip Fins." Proceedings of the ASME 14th International Conference in Nanochannels Microchannels Minichannels HTFEICNMM2016 Conference. ASME. Washington DC, Washington DC. 10-14 Jul. 2016. Conference Presentation.
Recinella, Alyssa and Satish G. Kandlikar. "Heat Flux Dissipation of ~1kW/cm2 using Radial Microchannels and Offset Strip Fins." ASME IMECE. ASME. Phoenix, AZ. 11-17 Nov. 2016. Conference Presentation.
Raghupathi, P. "Pool Boiling Performance of Shallow Microgroove Surfaces." ASME IMECE. ASME. Phoenix, AZ. 11-17 Nov. 2016. Conference Presentation.
Kandlikar, Satish G. "Enhanced Flow Boiling to Meet 1 kW/cm2 Heat Dissipation Challenge." National Central University. Taoyuan City, Taiwan. N/A Dec. 2016. Guest Lecture.
Kandlikar, Satish G. "Fundamental Considerations to Enhance Flow Boiling Performance in High Heat Flux Dissipation in Microchannels." Taipei University. Taipei, Taiwan. N/A Dec. 2016. Guest Lecture.
Provisional Patent
Jaikumar, Arvind and Satish G. Kandlikar. "Pool Boiling Enhancement Through Separate Liquid- Vapor Pathways with Feeder Channels Supplying Liquid to Nucleating Regions,." U.S. Provisional Patent Application 62/256,286. 2016.
Full Patent
Santhanam,, Kalathur S.V., et al. "Electrochemical Process for Producing Graphene, Graphene Oxide, Metal Composites, and Coated Substrates." U.S. Patent US20160017502 A1. 2016.
Kandliar, Satish G. "Refrigerant System for Producing Chilled Liquid." U.S. Patent 62/375,217,. 2016.
Jason Kolodziej
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Published Conference Proceedings
Kolodziej, Jason R and John N Trout. "Reciprocating Compressor Valve Condition Monitoring Using Image-based Pattern Recognition." Proceedings of the Annual Conference of the Prognostics and Health Management Society 2016. Ed. PHM Society. Denver, CO: n.p., 2016. Web. «
Full Patent
Kolodziej, Jason R. "Self-Tuning Thermal Control of an Automotive Fuel Cell Propulsion System." U.S. Patent 9437884. 6 Sep. 2016. *
Alexander Liberson
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Journal Paper
Liberson, Alexander S and Jeffrey S Lillie, David A Borkholder. "Improved Blood Pressure Prediction Using Systolic Flow Correction of Pulse Wave Velocity." Cardiovascular Engineering and Technology. (2016): 1-9. Web. *
Liberson, Alexander S and Jeffrey S Lillie, David A Borkholder, Steven W Day. "A Physics Based Approach to the Pulse Wave Velocity Prediction in Compliant Arterial Segments." Journal of Biomechanics. (2016): 1-7. Web. *
Liberson, Alexander S. "Quantification of Hemodynamic Pulse Wave Velocity Based on a Thick Wall Multi-Layer Model for Blood Vessels." Journal of Fluoid Flow, Heat and Mass Transfer 3. (2016): 54-61. Print. *
Rui Liu
Assistant Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Published Conference Proceedings
Stringer, Brian, et al. "Effect of Cutting Conditions on Dimensional Accuracy and Surface Roughness in Traditional Milling of Steel." Proceedings of the Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition. Ed. unknown. Phoenix, Arizona: The American Society of Mechanical Engineers, 2016. Web. *
Risa Robinson
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Journal Paper
Gerloff, J. and I. K. Sundar. "Inflammatory Response by Different E-cigarette Flavoring Chemicals Identified by GC-MS in E-liquids and E-vapors on Human Lung Epithelial Cells and Fibroblasts." AIVT. (2016): 30. Print. *
Robinson, R.J., et al. "Week Long Topography Study of Young Adults Using Electronic Cigarettes in Their Natural Environment." PLOS One 13. 11 (2016): 10. Web. *
Published Conference Proceedings
Lee, Youn Ok, et al. "Variation in Vaping: Examining Daily ENDS Puff Topography Among Established and Non-established Cigarette Smokers." Proceedings of the NIH TRSC May meeting. Ed. NIH. Baltimore, MD: n.p., 2016. Print.
Hensel, Edward and Risa Robinson. "Engineering Innovations for Global Sustainability." Proceedings of the 114th LACCEI International Multi-Conference for Engineering, Education, and Technology. Ed. LACCEI. San Jose, Costa Rica: n.p., 2016. Print. ˜
Invited Paper
Lerner, C., et al. "Mitochondrial Stress and Inflammation Following Exposure to Electronic Cigarette Aerosols." 22nd Annual Conference of the Society for Research on Nicotine & Tobacco. (2016). Print. ∆
Invited Keynote/Presentation
Robinson, R., et al. "4. What’s Inhaled by Vaping? Dosimetry, Deposition, Distribution, and Topography: Pulmonary Physiological and Clinical Effects." E-Cigarette Vaping: Preclinical and Clinical Pulmonary Health. American Thoracic Society. San Diego, CA. 15 May 2016. Conference Presentation. ∆
Robert Stevens
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Journal Paper
Schrlau, Michael G., Robert J Stevens, and Sara Schley. "Advances in Engineering Education Flipping Core Courses in the Undergraduate Mechanical Engineering Curriculum"¯: Heat Transfer." Advances in Engineering Education 5. 3 (2016): 1-27. Print. *
Published Conference Proceedings
Huselstein, Samantha, Steven J. Weinstein, and Robert J. Stevens. "Prototype and Model of Passive Tropical Fruit Dryer Utilizing a Flexible Transpired Solar Collector." Proceedings of the Global Humanitarian Technology Conference. Ed. IEEE. Seattle, WA: n.p., Web. *
Benjamin Varela
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Journal Paper
Ellis, Kathleen, et al. "Modeling Setting Time and Compressive Strength in Sodium Carbonate Activated Blast Furnace Slag Mortars using Statistical Mixture Design." Cement and Concrete Composites 74. (2016): 1-6. Web. *
Published Conference Proceedings
Ellis, Kathleen and Benjamin Varela. "Comparative Life Cycle Analysis of Sodium Carbonate Activated Blast Furnace Slag Concrete and Portland Cement Based Concrete." Proceedings of the IIE Annual Conference and Exposition 2016. Ed. MD sarder, Hui Yang, and Zhenyu Kong. san Francisco, California: n.p., Web. «
Peer Reviewed/Juried Poster Presentation or Conference Paper
Alharbi, Najat, Richard K. Hailstone, and Benjamin Varela. "TEM and SEM Characterization of Alkali Activatred Slag." Proceedings of the Microscopy and Microanalysis 2016 Meeting. Ed. Mike Marko, et al. Columbus, Ohio: n.p.. £
P Venkataraman
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2016 Submissions
Published Conference Proceedings
Venkataraman, P. "DATA DRIVEN PARAMETRIZATION FOR FLEXIBLE AIRFOILS AND PREDICTIVE AERODYNAMICS, DETC2016-59289." Proceedings of the ASME 36th Computers and Information in Engineering Conference, August 21-24, 2016, Charlotte NC. Ed. ASME. Charlotte, NC: ASME, Print. «
Venkataraman, P. "APPROXIMATE ANALYTICAL SOLUTIONS TO NONLINEAR INVERSE BOUNDARY VALUE PROBLEMS, DETC2016-59306." Proceedings of the ASME 36th Computers and Information in Engineering Conference, August 21-24, 2016, Charlotte NC. Ed. ASME. Charlotte, NC: ASME, Print. «