MECHANICAL ENGINEERING
To view listing from a different department, select department name from the right.Margaret Bailey
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Full Length Book
Moran, Michael, et al. Fundamentals of Engineering Thermodynamics. 9 ed. Hobokin, NJ: John Wiley & Sons, Inc., 2018. Print. ˜
Moran, Michael, et al. Fundamentals of Engineering Thermodynamics. 9 ed. Hobokin, NJ: John Wiley & Sons, Inc., 2018. Web. ˜
Invited Keynote/Presentation
Diffusion, Science. "Professor Margaret Bailey – Seeds of Change – Promoting STEM Careers for Women." Scientia. Pioneering Approaches to Inclusive Education, Issue 191. Bristol, United Kingdom. 12 Jul. 2018. Address.
Bailey, Margaret B. and Carol Marchetti. "Reimagining and Refining Campus Culture Series: Faculty Salary Equity Studies - Navigating Politics and Potential Pitfalls Webinar." AIM/WEPAN Webinar Series. AIM and WEPAN. Bethlehem, PA. 9 Jan. 2018. Guest Lecture.
Stephen Boedo
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Booker, J.F. and S. Boedo. "Nodal Unsteady Inverse EHL: Axisymmetric Normal Approach." ASME Journal of Tribology 140. (2018): 41501. Print. *
Boedo, S. and J.F. Booker. "Erratum: Warner-Sommerfeld Impedance and Mobility Maps." ASME Journal of Tribology 140. (2018): 17001. Print. *
Boedo, S. and J.F. Booker. "Discussion of “A General Model for Liquid and Gas Lubrication, Including Cavitation” by N. Brunetière." ASME Journal of Tribology 140. (2018): 55501. Print. *
Booker, J.F. and S. Boedo. "Closure of the Paper “Nodal Unsteady Inverse EHL: Axisymmetric Normal Approach,”." ASME Journal of Tribology 140. (2018): 66001. Print. *
Journal Editor
Boedo, S., ed. ASME Journal of Tribology. New York: American Society of Mechanical Engineers, 2018. Print. *
Ke Du
Research Assistant Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Du, Ke, et al. "Superhydrophobic waveguide: Liquid-core air-cladding waveguide platform for optofluidics." Applied Physics Letters. (2018): 143701. Print. *
Alfonso Fuentes Aznar
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Gonzalez-Perez, Ignacio, Miguel Martinez-Diaz, and Alfonso Fuentes-Aznar. "Compensacion de los Errores de Alineacion Provocados por las Deflexiones de los Ejes en Transmisiones de Engranajes Conicos Espirales Disenadas con Distintos Tipos de Huella de Contacto." Revista Iberoamericana de Ingenieria Mecanica 22. 2 (2018): 102-119. Print. «
Fuentes-Aznar, Alfonso, Ramon Ruiz-Orzaez, and Ignacio Gonzalez-Perez. "Computational Approach to Design Face-Milled Spiral Bevel Gear Drives with Favorable Conditions of Meshing and Contact." Meccanica 53. 10 (2018): 2669–2686. Print. *
Fuentes-Aznar, Alfonso, Eloy Yague-Martinez, and Ignacio Gonzalez-Perez. "Computerized Generation and Gear Mesh Simulation of Straight Bevel Gears Manufactured by Dual Interlocking Circular Cutters." Mechanism and Machine Theory 122. (2018): 160-176. Print. *
Gonzalez-Perez, Ignacio and Alfonso Fuentes-Aznar. "Implementation of a Finite Element Model for Gear Stress Analysis Based on Tie-Surface Constraints and Its Validation Through the Hertz’s Theory." Journal of Mechanical Design 140. (2018): (023301)1-13. Print. *
Fuentes-Aznar, Alfonso and Ignacio Gonzalez-Perez. "Gear Tooth Strength Analysis of High Pressure Angle Cylindrical Gears." Gear Solutions. June (2018): 30-38. Print. ∆
Fuentes-Aznar, Alfonso and Ignacio Gonzalez-Perez. "Resistenza di Ingranaggi Cilindrici con Elevato Angolo di Pressione." Organi di Transmissione. Luglio (2018): 24-31. Print. ∆
Published Conference Proceedings
Gonzalez-Perez, Ignacio, Miguel Martinez-Diaz, and Alfonso Fuentes-Aznar. "Compensacion de los Errores de Alineacion Provocados por las Deflexiones de los Ejes en Transmisiones de Engranajes Conicos Espirales Disenadas con Distintos Tipos de Huella de Contacto." Proceedings of the XXII Congreso Nacional de Ingenieria Mecanica. Ed. Jose I. Pedrero. Madrid, Spain: Asociacion Espanola de Ingenieria Mecanica, 2018. Print. *
Fuentes-Aznar, Alfonso and Ignacio Gonzalez-Perez. "Integrating Non-Contact Metrology in the Process of Analysis and Simulation of Gear Drives." Proceedings of the AGMA 2018 Fall Technical Meeting. Ed. N/A. Alexandria, VA: American Gear Manufacturers Association, 2018. Print. *
Kini, Sachin, Alfonso Fuentes-Aznar, and Hany Ghoneim. "Composite Fabric Blankets for Plastic Gears." Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition (IMECE2018). Ed. N/A. Pittsburg, PA: American Society of Mechanical Engineers, 2018. Print. *
Journal Editor
Fuentes-Aznar, Alfonso, ed. Mechanism and Machine Theory. Amsterdam, Netherlands: Elsevier, 2018. Print. *
Hany Ghoneim
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Published Conference Proceedings
Kini, S., A. Fuentes-Aznar, and H. Ghoneim. "Composite Fabric Blankets for Plastic Gears." Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition IMECE2018. Ed. Olesay I. Zupanska. Pitsburg, PA: n.p., 2018. Print. «
Amitabha Ghosh
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Published Conference Proceedings
Ghosh, Amitabha. "Motivation Building Strategies of Mathematics Instruction for Undergraduate Students in Mechanical Engineering." Proceedings of the 2018 ASEE Annual Conference & Exposition, June 24 - 27, 2018, Salt Lahe City, Utah. Ed. ASEE. Salt Lake City, UT: ASEE, Print. *
Surendra Gupta
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Lutondo, S., et al. "Surface Modification of Polyethersulphone (PES) with Ozone." Ozone: Science & Engineering. (2018): ISSN: 0191-9512. Web. £
Omar, O., et al. "Reaction of Ozone with Polybenzimidazole (PBI)." Ozone: Science & Engineering 40. 5 (2018): 7 pages. Web. £
Li, X., et al. "Surface Modification of Polystyrene with O Atoms Produced Downstream from an Ar/O2 Microwave Plasma." Technologies 2018 6. 21 (2018): 8 pages. Web. £
Published Conference Proceedings
Gupta, S. K., et al. "Scholarship Programs for Vertical Transfers in Engineering and Engineering Technology." Proceedings of the 2018 ASEE Annual Conference, June 24-27, 2018, Salt Lake City, UT. Ed. ASEE. Salt Lake City, UT: ASEE, Web. «
Edward Hensel Jr.
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Eddingsaas, N.C., et al. "Qualitative Analysis of e-liquid Emissions as a Function of Flavor Additives Using Two Aerosol Capture Methods." International Journal of Environmental Research and Public Health 15. 2 (2018): 1-14. Print. *
Robinson, R. J., et al. "Effect of e-liquid Flavor on Topography and Consumption Behavior in a 2-week Natural Environment Switching Study." Public Library of Science, PLoS ONE 13. 4 (2018): 1-17. Web. *
O.Lee, Y., et al. "Latent Class Analysis of E-cigarette Use Sessions in Their Natural Environments." Nicotine & Tobacco Research. (2018): 1-8. Print. *
Hensel, E. C., S. Jayasekera, and R. J. Robinson. "Accounting for Effects of System Dynamics to Improve Accuracy of Emissions Reported in E-cig Vaping Machines." Inhalation Toxicology. (2018): 1-11. Print. *
Robinson, R. J., et al. "A Framework to Investigate the Impact of Topography and Product Characteristics on Electronic Cigarette Emissions." Public Library of Science, PLoS ONE 13. 11 (2018): 1-19. Web. *
Peer Reviewed/Juried Poster Presentation or Conference Paper
Lee, Y. O., et al. "Identifying E-cigarette Person and Session Types Using Real-World Puff Topography." Proceedings of the SRNT 2018 Annual Meeting. Ed. SRNT. Baltimore, MD: SRNT. *
Hensel, E. C., et al. "Analyzing Behavior of e-cig Users in Their Natural Environment Using Continuous Real-Time Plots of Aerosol Consumption." Proceedings of the SRNT 2018 Annual Meeting. Ed. SRNT. Baltimore, MD: SRNT. *
Robinson, R. J., et al. "Effect of e-liquid Product Characteristics on Topography Behavior of e-cig Users in a 2-week Natural Environment Switching Study." Proceedings of the SRNT 2018 Annual Meeting. Ed. SRNT. Baltimore, MD: SRNT. *
Eddingsaas, N. C., et al. "Effect of Hookah Hose Dimensions and Material on TPM, Nicotine, and Aldehydes." Proceedings of the 2018 Tobacco Regulatory Science Meeting. Ed. NIH. Bethesda, MD: NIH. *
Robinson, R. J., et al. "Family of Topography Monitors for Natural Environment Observation Studies of Tobacco Product Use." Proceedings of the 2018 Tobacco Regulatory Science Meeting. Ed. NIH. Bethesda, MD: NIH. *
Hensel, E. C., et al. "Hookah and Dual-Use Behavior in the Natural Environment." Proceedings of the 2018 Tobacco Regulatory Science Meeting. Ed. NIH. Bethesda, MD: NIH. *
Jayasekera, S., E. C. Hensel, and R. J. Robinson. "Feasibility Assessment of Simultaneous Puff and Chest Belt Monitoring to Better Understand Tobacco Product Inhalation Patterns." Proceedings of the 2018 BMES Annual Meeting. Ed. BMES. Atlanta, GA: BMES. *
Patricia Iglesias Victoria
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Kudtarkar, K., et al. "Effects of Chemical Composition on the Electromechanical Properties of Polymer Ionic-liquid Gel Beads." J. Fluids Eng 140. 10 (2018): 101103-1-6. Web. «
Matczak, L, et al. "Effect of Cation Nature on the Lubricating and Physicochemical Properties of Three Ionic Liquids." Tribology International 124. (2018): 23-33. Web. *
Tock, A, et al. "Tribological Performance of Textured Surfaces Created by Modulation Assisted Machining." ASME Journal of Tribology 140. 6 (2018): 061704-1-8. Web. *
Metha, P., et al. "Effect of Textured Surfaces Created by Modulation Assisted Machining on the Stribeck Curve and Wear Properties of Steel–aluminum Contact." Int. J. Adv. Manufaturing Technol 99. 1-4 (2018): 399-409. Web. «
Schertzer, M. and P. Iglesias. "Meta-Analysis Comparing Wettability Parameters and the Effect of Wettability on Friction Coefficient in Lubrication." Lubricants 6. 70 (2018): N/A. Web. *
Patel, A., H. Guo, and P. Iglesias. "Study of the Lubricating Ability of Protic Ionic Liquid on an Aluminum–Steel Contact." Lubricants 6. 70 (2018): N/A. Web. *
Kudtarkar, K., et al. "Effect of Metallization on the Electromechanical Properties of Microfluidically Synthesized Hydrogel Beads." J. Fluids Eng 141. 3 (2018): 031303-1-6. Web. *
Published Conference Proceedings
Ferri, Chris, et al. "Ionic Liquids as Additves to Cutting Fluids to Reduce Machine tool Friction and Wear." Proceedings of the ASME 2018 International Mechanical Engineering Conference and Exposition. Ed. ASME. Pittsburgh, PA: n.p., Web. *
Guo, H., et al. "The Effects of Single-Walled Carbon Nanotubes and Ionic Liquids in reduction of Friction and Wear." Proceedings of the ASME 2018 International Mechanical Engineering Conference and Exposition. Ed. ASME. Pittsburgh, PA: n.p., 2018. Web. *
Gutierrez, M. A., et al. "Effect of Carbon Nanotube-Phosphinate Ionic Liquid Thin Boundary Layer on the Tribological Behavior of Aluminum Alloy in Steel-on-Aluminum contact." Proceedings of the ASME 2018 International Mechanical Engineering Conference and Exposition. Ed. ASME. Pittsburgh, PA: n.p., 2018. Web. *
Magar, S., H. Guo, and P. Iglesias. "Estimation of Energy Conservation in Internal Combustion Engine Vehicles using Ionic Liquids as Additive." Proceedings of the ASME 2018 International Mechanical Engineering Conference and Exposition. Ed. ASME. Pittsburgh, PA: n.p., 2018. Web. *
Satish Kandlikar
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Perez-Raya, I. and S.G. Kandlikar. "Discretization and Implementation of a Sharp Interface Model for Interfacial Heat and Mass Transfer During Bubble Growth." Int. J. Heat Mass Transf. 116 (2018): 30-49. Web. *
Wong, P., K.S.V. Santhanam, and S.G. Kandlikar. "Cobalt Deposition in Graphene Quantum Dot Bath: Electrochemical and Spectroscopic Features: A Prospective Sensor Material." Journal of The Electrochemical Society 165. 5 (2018): B232-B239. Print. *
Perez-Raya, I and S.G. Kandlikar. "Discretization and Implementation of a Sharp Interface Model for Interfacial Heat and Mass Transfer During Bubble Growth." International Journal of Heat and Mass Transfer. (2018): 30-49. Print. *
Recinella, A. and S.G. Kandlikar. "Enhanced Flow Boiling Using Radial Open Microchannels With Manifold and Offset Strip Fins." Journal of Heat Transfer 140. 2 (2018): 21502. Print. *
Jaikumar, A., T.S. Emery, and S.G. Kandlikar. "Interplay Between Developing Flow Length and Bubble Departure Diameter During Macroconvection Enhanced Pool Boiling." Applied Physics Letters 112. 7 (2018): 71603. Print. *
Emery, T.S., P.A. Raghupathi, and S.G. Kandlikar. "Flow Regimes and Transition Criteria during Passage of Bubbles through a Liquid-Liquid Interface." Langmuir 34. 23 (2018): 6766-6776. Web. *
Bulut, M., S.G. Kandlikar, and N. Sozbir. "A Review of Vapor Chambers." Heat Transfer Engineering. (2018): 1-23. Web. *
Rishi, A.M., A. Gupta, and S.G. Kandlikar. "Improving Aging Performance of Electrodeposited Copper Coatings During Pool Boiling." Applied Thermal Engineering. (2018): 406-414. Print. *
Emery, T.S., et al. "Dual Enhancement in HTC and CHF for External Tubular Pool Boiling–A Mechanistic Perspective and Future Directions." International Journal of Heat and Mass Transfer. (2018): 1053-1073. Print. *
Gupta, A., et al. "A Multiscale Morphological Insight into Graphene Based Coatings for Pool Boiling Applications." Heat Transfer Engineering 39. 15 (2018): 1331-1343. Print. *
Gonzalez-Hernandez, J.L., et al. "Generation and Thermal Simulation of a Digital Model of the Female Breast in Prone Position." ASME J of Medical Diagnostics 1. 4 (2018): 41006. Web. *
Emery, T.S., P.A. Raghupathi, and S.G. Kandlikar. "Bubble Growth Inside an Evaporating Liquid Droplet Introduced in an Immiscible Superheated Liquid." International Journal of Heat and Mass Transfer 127. Part C (2018): 313-321. Print. *
Hayes, A., et al. "Regulating Flow of Vapor to Enhance Pool Boiling." Applied Thermal Engineering 149. (2018): 1044-1051. Web. *
Chauhan, A. and S.G. Kandlikar. "Characterization of a Dual Taper Thermosiphon Loop for CPU Cooling in Data Centers." Appl. Therm. Eng. 146. (2018): 450-458. Print. *
Published Conference Proceedings
Perez-Raya, I. and S.G. Kandlikar. "A Volume of Fluid Based Model for the Simulation of Bubble Growth Over a Heated Surface." Proceedings of the ASME 2018 16th International Conference on Nanochannels, Microchannels, and Microchannels. Ed. -. Dubrovnik, Croatia: n.p., 2018. Web. *
Rishi, A.M., A. Gupta, and S.G. Kandlikar. "Improving Liquid Supply Pathways on Graphene Oxide Coated Surfaces for Enhanced Pool Boiling Heat Transfer Performance." Proceedings of the , ASME 2018 16th International Conference on Nanochannels, Microchannels, and Microchannels. Ed. -. Dubrovnik, Croatia: n.p., 2018. Web. *
Perez-Raya, I. and S.G. Kandlikar. "Simulation of Bubble Growth Over a Heated Surface with Interfacial Temperature Gradients and Sharp Interface." Proceedings of the ASME International Mechanical Engineering Congress & Exposition (IMECE). Ed. -. Pittsburgh, PA: n.p., 2018. Web. *
Full Patent
Kandlikar, S.G.. "Heat Transfer System and Method Incorporating Tapered Flow Field." U.S. Patent 16/018,927. 2018.
Invited Keynote/Presentation
Kandlikar, S.G. "New Understanding of the Heat Transfer Mechanisms During Pool and Flow Boiling and its Application in Boiling Enhancement – An innovation Driven Approach." Graduate Seminar. University of California, Irvine. Irvine, CA. 2 Mar. 2018. Guest Lecture.
Kandlikar, S.G. "Heat Transfer Mechanisms During Pool and Flow Boiling and its Application in Boiling Enhancement – An Innovation Driven Approach." Graduate Seminar. Darmstadt University. Darmstadt, Germany. 7 Jun. 2018. Guest Lecture.
Kandlikar, S.G. "Current Status of Flow Boiling Heat Transfer." PhD Defence. Trondheim University. Trondheim, Norway. 3 Sep. 2018. Guest Lecture.
Kathleen Lamkin-Kennard
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Jung, John, et al. "Isolating the Influences of Fluid Dynamics on Selectin-Mediated Particle Rolling at Venular Junctional regions." Microvascular Research 118. (2018): 144-154. Print. «
Corbaci, Mert, Wayne Walter, and Kathleen A. Lamkin-Kennard. "Implementation of Soft-Lithography Techniques for Fabrication of Bio-Inspired Multi-Layer Dielectric Elastomer Actuators with Interdigitated Mechanically Compliant Electrodes." Actuators 7. 4 (2018): 73. Web. *
Kate Leipold
Principal Lecturer
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Published Conference Proceedings
Leipold, Kate and Sarilyn Ivancic. "Efforts to Improve Free Body Diagrams." Proceedings of the 2018 ASEE Annual Conference & Exposition. Ed. ASEE. Salt Lake City, Ut: ASEE, 2018. Web. *
Risa Robinson
Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Robinson, R. J., et al. "A Theoretical Framework to Investigate the Impact of Topography and Product Characteristics on Electronic Cigarette Emissions." PLoS ONE 13. 11 (2018): 206341. Web. *
Hensel, E.C., S. Jayasekera, and R. J. Robinson. "Accounting for Effects of System Dynamics to Improve Accuracy of Emissions Reported in E-cig Vaping Machines." Inhalation Toxicology. (2018): 1-11. Web. *
Lee, Youn Ok, et al. "Latent Class Analysis of E-cigarette Use Sessions in Their Natural Environments." Nicotine & Tobacco Research. (2018): -. Web. *
Robinson, R.J., et al. "Effect of e-liquid Flavor on Electronic Cigarette Topography and Consumption Behavior in a 2-week Natural Environment Switching Study." PLOS. (2018): -. Web. *
Eddingsaas, N. C., et al. "Qualitative Analysis of e-liquid Emissions as a Function of Flavor Additives Using Two Aerosol Capture Methods." Int J Environ Res Public Health 15. 2 (2018): 323. Web. *
Sul, B., et al. "Assessing Airflow Sensitivity to Healthy and Diseased Lung Conditions in a Computational Fluid Dynamics Model Validated In Vitro." Journal of Biomechanical Engineering 140. 5 (2018): 051009-051009-14. Web. *
Invited Keynote/Presentation
Robinson, R. J. "Understanding the Quantitative Relationship Between E-cigarette Use Behavior and Exposure." “Updates and Controversies Related to Inhaled Aerosols". International Society for Aerosols in Medicine, 2018 Symposium. San Diego, CA. 18 May 2018. Guest Lecture.
Peer Reviewed/Juried Poster Presentation or Conference Paper
Jayasekera, Shehan, Edward Hensel, Jr., and Risa J Robinson. "Feasibility Assessment of Simultaneous Puff and Chest Belt Monitoring to Better Understand Tobacco Product Inhalation Patterns." Proceedings of the 2018 BMES Annual Meeting, October 17-20, 2018, Atlanta, Georgia. Ed. -. Atlanta, GA: n.p.. ˜
Hensel, E.C., et al. "Hookah and Dual-Use Behavior in the Natural Environment." Proceedings of the 2018 Tobacco Regulatory Science Meeting, Baltimore, MD, June, 2018. Ed. -. Baltimore, MD: n.p.. ˜
Robinson, R.J., et al. "Design of the wPUM™ Family of Topography Monitors for Natural Environment Observation Studies of Tobacco Product Use." Proceedings of the 2018 Tobacco Regulatory Science Meeting, Baltimore, MD, June, 2018. Ed. -. Baltimore, MD: n.p.. ˜
Eddingsaas, N.C., et al. "Effect of Hookah Hose Dimensions and Material on TPM, Nicotine, and Aldehydes." Proceedings of the 2018 Tobacco Regulatory Science Meeting, Baltimore, MD, June, 2018. Ed. -. Baltimore, MD: n.p.. ˜
Robinson, R. J., et al. "Effect of e-liquid Product Characteristics on Topography Behavior of e-cig Users in a 2-week Natural Environment Switching Study." Proceedings of the SRNT 2018 Annual Meeting, Baltimore, MD, Feb 21-24, 2018. Ed. -. Baltimore, MD: n.p.. ˜
Lee, Y.O., et al. "Identifying E-cigarette Person and Session Types Using Real-World Puff Topography." Proceedings of the SRNT 2018 Annual Meeting, Baltimore, MD, Feb 21-24, 2018. Ed. -. Baltimore, MD: n.p.. ˜
Hensel, E.C., et al. "Analyzing Behavior of e-cig Users in Their Natural Environment Using Continuous Real-Time Plots of Aerosol Consumption." Proceedings of the 2018 SRNT Annual Meeting, Baltimore, MD, Feb 21-24, 2018. Ed. -. Baltimore, MD: n.p.. ˜
Michael Schertzer
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Journal Paper
Bernetski, Kimberly A., et al. "Characterization of Electrowetting, Contact Angle Hysteresis, and Adhesion on Digital Microfluidic Devices with Inkjet-printed Electrodes." Microfluidics and Nanofluidics 22. 96 (2018): https://doi.org/10.1007/s10404-018-2119-4. Print. *
Schertzer, Michael J. and Patricia Iglesias. "Meta-Analysis ComparingWettability Parameters and the Effect ofWettability on Friction Coefficient in Lubrication." Lubricants 6. 3 (2018): 1-10. Web. *
Kudtarkar, Kaushik, et al. "Effect of Metallization on the Electromechanical Properties of Microfluidically Synthesized Hydrogel Beads." ASME Journal of Fluids Engineering 141. 3 (2018): 1-6. Print. *
Matczak, Lea, et al. "Effect of Cation Nature on the Lubricating and Physicochemical Properties of Three Ionic Liquids." Tribology International 124. (2018): 23-33. Print. *
Kudtarkar, Kaushik, et al. "Effects of Chemical Composition on the Electromechanical Properties of Microfluidically Synthesized Hydrogel Beads." ASME Journal of Fluids Engineering 140. 10 (2018): 1-6. Print. *
Published Conference Proceedings
Li, Xi, Kara L. Maki, and Michael J. Schertzer. "Preliminary Investigation of the Effect Of Dielectrophoresis on Colloidal Transport and Deposition in Evaporating Droplets." Proceedings of the ASME International Mechanical Engineering Conference & Exposition. Ed. ASME. Pittsburgh, PA: n.p., 2018. Web. *
P Venkataraman
Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering
2018 Submissions
Published Conference Proceedings
Venkataraman, P. "DETC2018-85103, Data Clustering Using the Natural Bezier Functions." Proceedings of the 38th Computers and Information in Engineering. Ed. ASME. Quebec City, Canada: ASME, 2018. Print. «