MECHANICAL ENGINEERING

To view listing from a different department, select department name from the right.

Margaret Bailey

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2019 Submissions

Journal Paper

Dell, Elizabeth M., et al. "The Development and Evaluation of an ADVANCE Professional Developments Series to Promote Institutional Transformation." ADVANCE Journal 1. 2 (2019): 1-24. Print. « £

Invited Keynote/Presentation

Bailey, Margaret, et al. "Reimagining and Refining Campus Cultures: Promoting an Inclusive Learning Environment at RIT." SIGITE 2017: The 18th Annual Conference on Information Technology Education/Research. ACM. Rochester, New York. 6 Oct. 2017. Conference Presentation. «

Marchetti, Carol and Margaret B. Bailey. "The Importance of “How” in Faculty Salary Equity Studies." 2019 Leadership in Higher Education Conference. Magna Leadership in Higher Education. St. Louis, Missouri. 4 Oct. 2019. Conference Presentation. ˜

Bailey, Margaret B. "Engineering the Future: How the WE@RIT Programme is Encouraging More Women into the Sector." Thought Leaders Feature. Research Outlook. Stonehouse, United Kingdom. 18 Mar. 2019. Address.

Bailey, Margaret B. "Lesson Learned in Managing Change and Transformation at RIT: A Gender Equity Focus." Equity in STEM Community Convening. NSF ADVANCE Program. Cleveland, OH. 7 Oct. 2019. Conference Presentation. £ ≠

Bailey, Margaret B. "Conflict Resolution and Mediation: Framing, Tools, Structures." UD Advance Program. University of Delaware. Newark, DE. 26 Sep. 2019. Guest Lecture.

Bailey, Margaret B. "Lessons Learned in Managing Change and Transformation at RIT: A Gender Equity Focus." Celebrating Women’s History Month - Women and Gender Studies Colloquium. Women and Gender Studies Program. Rochester, NY. 25 Mar. 2019. Keynote Speech.

Bailey, Margaret B. "Promoting Gender Equity at RIT: Focus on Culture Change." Women in Design. CIAS, Rochester Institute of Technology. Rochester, New York. 22 Mar. 2019. Address.

Invited Article/Publication

Bailey, Margaret B., et al. "Final Outcomes Report: Rochester Institute of Technology: Advance RIT." NSF ADVANCE Program. (2019). Web. ∆ ≠

View All Submissions

Ke Du

Assistant Professor
Mechanical Engineering
Kate Gleason College of Engineering

2019 Submissions

Journal Paper

Qin, Peiwu, et al. "Rapid and Fully Microfluidic Ebola Virus Detection with CRISPRCas13a." ACS Sensors. (2019): 1048-1054. Print. *

Chen, Xinye, et al. "Experimental and Theoretical Study on the Microparticle Trapping and Release in a Deformable Nano-Sieve Channel." Nanotechnology 31. 5 (2020): 05LT01. Print. *

Du, Ke, et al. "Manipulation of the Superhydrophobicity of Plasma-Etched Polymer Nanostructures." Micromachines. (2018): 304. Web. *

Du, Ke, et al. "Self-formation of polymer nanostructures in plasma etching: mechanisms and applications." Journal of Micromechanics and Microengineering. (2017): 14006. Print. *

Du, Ke, et al. "Microfluidic System for Detection of Viral RNA in Blood Using a Barcode Fluorescence Reporter and a Photocleavable Capture Probe." Analytical Chemistry. (2017): 12433-12440. Print. *

Chen, Xinye, et al. "Rapid Escherichia coli (E. coli) Trapping and Retrieval from Bodily Fluids via a Three-Dimensional (3D) Beads Stacked Nano-Device." ACS Applied Materials and Interfaces. (2020): In press. Print. *

Invited Paper

He, Qian, et al. "Perspective of Molecular Diagnosis in Healthcare: From Barcode to Pattern Recognition." Diagnostics. (2019). Web. *

View All Submissions

Alfonso Fuentes Aznar

Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering

2019 Submissions

Journal Paper

Fuentes-Aznar, Alfonso and Ignacio Gonzalez-Perez. "Integrating Non-Contact Metrology in the Process of Analysis and Simulation of Gear Drives." Gear Solutions. February (2019): 28-35. Print. ∆

Hsieh, Chiu-Fan and Alfonso Fuentes-Aznar. "Performance Prediction Method of Cycloidal Speed Reducers." Journal of the Brazilian Society of Mechanical Sciences and Engineering 41. 186 (2019): 1-15. Print. £

Guo, Hui, Ignacio Gonzalez-Perez, and Alfonso Fuentes-Aznar. "Computerized Generation and Meshing Simulation of Face Gear Drives Manufactured by Circular Cutters." Mechanism and Machine Theory 133. (2019): 44-63. Print. £

Gonzalez-Perez, Ignacio and Alfonso Fuentes-Aznar. "Conjugated Action and Methods for Crowning in Face-Hobbed Spiral Bevel and Hypoid Gear Drives Through the Spiral System." Mechanism and Machine Theory 139. (2019): 109-130. Print. £

Book Chapter

Fuentes-Aznar, Alfonso. "Design and Generation of Straight Bevel Gears." Advances in Gear Design and Manufacture. Ed. Stephen P. Radzevich. Boca Raton, FL: Taylor and Francis Group, 2019. 66-119. Print.

Published Conference Proceedings

Gonzalez-Perez, Ignacio, Stefania Rosato, and Alfonso Fuentes-Aznar. "Modeling and Analysis of Root Profiles with Ellipse and Hermite Curves in Spur Gear Drives." Proceedings of the Iberoamerican Congress of Mechanical Engineering. Ed. N/A. Cartagena, Colombia: n.p., 2019. Print. *

Braescu, Victor, Alfonso Fuentes-Aznar, and Hany Ghoneim. "Enhancing Load Capacity of Plastic Gears via the Application of Woven Composite Blankets." Proceedings of the Proceedings of the American Society of Composites. Ed. N/A. Atlanta, GA: n.p., 2019. Print. *

Guo, Hui and Alfonso Fuentes-Aznar. "Research on Face Gear Drives Considering Compensation of Errors of Alignment Caused by Shaft Deflections." Proceedings of the 2019 ASME International Power Transmission and Gearing Conference (PTG). Ed. N/A. Anaheim, CA: American Society of Mechanical Engineers, 2019. Print. £

Chen, Zhen, Ming Zeng, and Alfonso Fuentes-Aznar. "Geometric Design of Pure Rolling Rack and Pinion Mechanisms." Proceedings of the 2019 ASME International Power Transmission and Gearing Conference (PTG). Ed. N/A. Anaheim, CA: American Society of Mechanical Engineers, 2019. Print. £

Journal Editor

Fuentes-Aznar, Alfonso, ed. Mechanism and Machine Theory. Amsterdam, Netherlands: Elsevier, 2019. Print. £

View All Submissions

Hany Ghoneim

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2019 Submissions

Published Conference Proceedings

Braescu, V., A. Fluentes-Aznar, and H. Ghoneim. "Enhancing Load Capacity of Plastic Gears Via the Application of Woven Composite Blankets." Proceedings of the American Society for Composites. Ed. Kyriaki Kalaitzidou. Atlanta, Georgia: n.p., 2019. Print. «

View All Submissions

Amitabha Ghosh

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2019 Submissions

Published Conference Proceedings

Ghosh, Amitabha. "Challenges in Teaching Ideal Flows to ME Students Concurrently with Senior Design." Proceedings of the 126th ASEE Annual Conference and Exposition. Ed. ASEE. Tampa, Florida: ASEE, 2019. Print. «

Ghosh, Amitabha. "Toward a T-Shaped Integration of Mathematics in Mechanical Engineering." Proceedings of the 126th ASEE Annual Conference and Exposition. Ed. ASEE. Tampa, Florida: ASEE, 2019. Print. «

View All Submissions

Surendra Gupta

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2019 Submissions

Journal Paper

Lutondo, S., et al. "Surface Modification of Polyethersolfone (PES) with Ozone." Ozone: Science & Engineering 41. 5 (2019): 448-453. Print. *

Mahajan, C. G., et al. "Formation of Copper Nickel Bimetallic Nanoalloy Film Using Precusrsor Inks." Materials Sciences and Applucations 10. 4 (2019): 349-363. Print. *

Book Chapter

Takacs, G. A., et al. "Enhancing the wettability of Polybenzimidazole (PBI) to Improve Fuel Cell Performance." Advances in Contact Angle, Wettability and Adhesion. Ed. K. L. Mittal. New York, NY: John Wiley & Sons, 2019. 179-192. Print. *

Published Conference Proceedings

Gupta, S. K., et al. "An Orientation Program for Vertical Transfers in Engineering and Engineering Technology." Proceedings of the 2020 ASEE Annual Conference. Ed. American Society for Engineering Education. Tampa, FL: American Society for Engineering Education, 2019. Web. «

View All Submissions

Edward Hensel Jr.

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2019 Submissions

Journal Paper

Eddingsaas, Nathan C., et al. "Effect of User Puffing Topography on Total Particulate Matter, Nicotine, and Volatile Carbonyl Emissions from Narghil waterpipes." Tobacco Control. (2019): 16. Web. *

Hensel, Edward C., et al. "Framework to Estimate Total Particulate Mass and Nicotine Delivered to E-cig Users from Natural Environment Monitoring Data." Scientific Reports. (2019): 9. Web. *

Peer Reviewed/Juried Poster Presentation

Hensel, E.C., et al. "Hookah Topography in the Natural Environment to inform Behavior-Based Design of Experiments for Emissions Testing." Proceedings of the 2019 Tobacco Regulatory Science Meeting. Ed. NIH. Bethesda, MD: NIH. *

Robinson, Risa J and Edward C Hensel. "Should Low Nicotine Eliquids be Considered Low Yield Products?" Proceedings of the 2019 Tobacco Regulatory Science Meeting. Ed. NIH. Bethesda, MD: NIH. *

Eddingsaas, Nathan C., et al. "Effect of Puff Flowrate and Puff Duration on emission of Particulate Matter, Nicotine, and Aldehydes from Narghil Waterpipes." Proceedings of the 2019 Tobacco Regulatory Science Meeting. Ed. NIH. Bethesda, MD: NIH. *

Robinson, Risa J and Edward C Hensel. "A New Approach to Assess Yield Delivered to the Mouth of Ends Users Based On Product Emissions and Natural Environment Topography." Proceedings of the SRNT 2019 Annual Meeting. Ed. SRNT. San Francisco, CA: SRNT. *

Hensel, Edward C., et al. "Framework to Report Total Particulate Mass and Aldehyde Emission Characteristics from Hookah." Proceedings of the SRNT 2019 Annual Meeting. Ed. SRNT. San Francisco, CA: SRNT. *

Meyers, Bryan T, et al. "Characterization of the wPUMTM Generation 3 Topography Monitors." Proceedings of the 2019 BMES Annual Meeting. Ed. BMES. Philadelphia, PA: BMES. *

View All Submissions

Patricia Iglesias Victoria

Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering

2019 Submissions

Journal Paper

Guo, H., R. Adukere, and P. Iglesias. "Effect of Ionicity of Three Protic Ionic Liquids as Neat Lubricants and Lubricant Additives to a Biolubricant." Coatings 9 (11). (2019): 713. Web. «

Guo, H., et al. "Lubricating Ability of Hydroxyl Magnesium Silicate-based Nanopowder as lubricant Additive." Tribology transactions In press. (2019): 123. Web. «

Sol, I. del, et al. "Tribological Performance of Ionic Liquids as Additives of Water-based Cutting Fluids." Wear 426-427. Part A (2019): 845-852. Web. «

Salguero, J., et al. "Effect of Laser Parameters on the Tribological Behavior of Ti6Al4V Titanium Microtextures Under Lubricated Conditions." Wear 426-427. Part B (2019): 1272-1279. Web. «

Vazquez-Martinez, J. M., et al. "Assessment the Sliding Wear Behavior of Laser Microtexturing Ti6Al4V under Wet Conditions." Coatings 9. 67 (2019): 121. Web. «

Published Conference Proceedings

H.Guo, and P.Iglesias. "Tribological Properties of Ammonium Protic Ionic Liquids As Additives in Polyalphaolefin for Steel-Steel Contact." Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition, IMECE2018-10645. Ed. ASME. Salt Lake City, Utah: n.p., Web. «

S.A.Magar, , H.Guo, and P. Iglesias. "Ionic Liquid As Cutting Fluid Additive Using Minimum Quantity Lubricant (MQL) in Titanium-Ceramic Contact." Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition, IMECE2018-10645. Ed. ASME. Salt Lake City, Utah: n.p., Web. «

Guo, H. and P. Iglesias. "Investigation of Protic Ionic Liquids Used as Lubricants (Abstract only)." Proceedings of the 2019 STLE Tribology Frontiers Conference. Ed. STLE. Chicago, Ill: n.p., Web. «

Sol, I. del, et al. "Tribological Performance of Ionic Liquids as Additives of Water-based Cutting Fluids." Proceedings of the 22th International Conference on Wear of Materials. Ed. WOM. Miami, Fl: n.p., Web. «

Salguero, J., et al. "Effect of Laser Parameters on the Tribological Behaviour of Ti6Al4V Titanium Microtextures Under Lubricated Conditions (Abstract only)." Proceedings of the 22th International Conference on Wear of Materials. Ed. WOM. Miami, Fl: n.p., 2019. Web. «

View All Submissions

Satish Kandlikar

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2019 Submissions

Journal Paper

G., Kandlikar, S. "A New Perspective on Heat Transfer Mechanisms and Sonic Limit in Pool Boiling." ASME. J. Heat Transfer 141. 5 (2019): 12 pages. Web. *

Emery, T. S. and S. G. Kandlikar. "Modeling Bubble Collisions at Liquid?Liquid and Compound Interfaces." Langmuir 35. 25 (2019): 8294-8307. Web. *

Rishi, A. M., S. G. Kandlikar, and A. Gupta. "Improved Wettability of Graphene Nanoplatelets (GNP)/copper Porous Coatings for Dramatic Improvements in Pool Boiling Heat Transfer." International Journal of Heat and Mass Transfer 132. (2019): 462-472. Web. *

Shamim, M. S., et al. "Evaluation of Wireless Network-on-chip Architectures with Microchannel-based Cooling in 3D Multicore Chips." Sustainable Computing: Informatics and Systems 21. (2019): 165-178. Web. *

Rishi, A. M., S. G. Kandlikar, and A. Gupta. "Repetitive Pool Boiling Runs: A Controlled Process to Form Reduced Graphene Oxide Surfaces from Graphene Oxide with Tunable Surface Chemistry and Morphology." Ind. Eng. Chem. Res 58. 17 (2019): 7156-7165. Web. *

Emery, T. S. and S. G. Kandlikar. "Film Size During Bubble Collision With a Solid Surface." J. Fluids Eng 141. 7 (2019): -. Web. *

Ye, Xuemin, Satish G. Kandlikar, and Chunxi Li. "Viscosity of Nanofluids Containing Anisotropic Particles: A Critical Review and a Comprehensive Model." Eur. Phys. J. E 42. 159 (2019): -. Web. *

Gonzalez-Hernandez, J.-L., et al. "Technology, Application and Potential of Dynamic Breast Thermography for the Detection of Breast Cancer." International Journal of Heat and Mass Transfer 131. (2019): 558-573. Web. *

Recinella, A. N., et al. "Clinical Infrared Imaging in the Prone Position for Breast Cancer Screening—Initial Screening and Digital Model Validation." ASME J of Medical Diagnostics 3. 1 (2019): -. Web. *

Hayes, A., et al. "Regulating Flow of Vapor to Enhance Pool Boiling." Applied Thermal Engineering 149. (2019): 1044-1051. Web. *

Chauhan, A. and S. G. Kandlikar. "Characterization of a Dual Taper Thermosiphon Loop for CPU Cooling in Data Centers." Applied Thermal Engineering 146. (2019): 450-458. Web. *

Ye, X., S. G. Kandlikar, and C. Li. "Viscosity of Nanofluids Containing Anisotropic Particles: A Critical Review and a Comprehensive Model." Eur. Phys. J. E 42. 12 (2019): 159. Web. *

Bulut, M., S. G. Kandlikar, and N. Sozbir. "A Review of Vapor Chambers." Heat Transfer Engineering 40. 19 (2019): -. Web. *

Full Patent

Jaikumar, A. and S. G. Kandlikar. "Pool Boiling Enhancement with Feeder Channels Supplying Liquid to Nucleating Regions." U.S. Patent US10473410B2. 12 Nov. 2019. «

Provisional Patent

Kandlikar, Satish, et al. "Detection and Characterization of Cancerous Tumors." U.S. Provisional Patent Application US20190385308A1. 19 Dec. 2019. «

Kandlikar, S. and A. Hayes. "Volcano-shaped Enhancement Features for Enhanced Pool Boiling." U.S. Provisional Patent Application US20190339008A1. 7 Nov. 2019. «

Perez-Raya, I. and S. Kandlikar. "Method for Modeling Interfaces." U.S. Provisional Patent Application US20190332728A1. 31 Oct. 2019. «

Kandlikar, S. G., et al. "Passive Two Phase Heat Transfer Systems." U.S. Provisional Patent Application US20190293358A1. 26 Sep. 2019. «

Gupta, A., S. G. Kandlikar, and A. M. Rishi. "Multi-Step Electrodeposition Technique for Hierarchical Porous Coatings with Tunable Wickability, Wettability and Durability." U.S. Provisional Patent Application US20190226110A1. 25 Jul. 2019. «

Peer Reviewed/Juried Poster Presentation

Recinella, Alyssa, Jose Luis Gonzalez Hernandez, and Satish Kandlikar. "Steady-State Infrared Imaging for Breast Cancer Screening." Proceedings of the Rochester Institute of Technology Graduate Showcases. Ed. -. Rochester, NY: n.p.. ˜

Gupta, A., A. Rishi, and S. Kandlikar. "Transformation of GO Surfaces to Reduced-GO Surfaces with Tunable Surface Chemistry and Morphology Via Pool Boiling Process." Proceedings of the 2019 AIChE Annual Meeting. Ed. -. Orlando, FL: n.p.. ˜

Rishi, A., A. Gupta, and S. Kandlikar. "Pool Boiling Heat Transport: A Controlled Process to Form Reduced GO Surfaces from GO with Tunable Surface Chemistry and Morphology." Proceedings of the 2019 AIChE Annual Meeting. Ed. -. Orlando, FL: n.p.. ˜

Chauhan, A. and S. G. Kandlikar. "High Heat Flux Dissipation Using Symmetric Dual-Taper Manifold in Pool Boiling." Proceedings of the ASME 2019 17th International Conference on Nanochannels, Microchannels, and Minichannels. Ed. -. St. John's, Newfoundland, Canada: n.p.. ˜

View All Submissions

Huaye Li

Visiting Lecturer
Mechanical Engineering
Kate Gleason College of Engineering

2019 Submissions

Journal Paper

Chen, Xinye, et al. "Experimental and Theoretical Study on the Microparticle Trapping and Release in a Deformable Nano-Sieve Channel." Nanotechnology. (2019): 6. Web. £

View All Submissions

Risa Robinson

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2019 Submissions

Journal Paper

Eddingsaas, Nathan C., et al. "Effect of User Puffing Topography on Total Particulate Matter, Nicotine, and Volatile Carbonyl Emissions from Narghil waterpipes." Tobacco Control. (2019): -. Web. *

Hensel, E.C., et al. "Framework to Estimate Total Particulate Mass and Nicotine Delivered to E-cig Users from Natural Environment Monitoring Data." Scientific Reports. (2019): -. Web. *

Robinson, Risa J. and Edward C. Hensel. "Behavior-based Yield for Electronic Cigarette Users of Different Strength Eliquids Based on Natural Environment Topography." Inhalation Toxicology 31. 13-14 (2019): 484-491. Web. *

Invited Article/Publication

Robinson, Risa. "2. How a Person Vapes, not Just what a Person Vapes, Could also Play a Big Role in Vaping Harm." The Conversation. (2019). Web.

Peer Reviewed/Juried Poster Presentation

Eddingsaas, N.C., et al. "Effect of Puff Flowrate and Puff Duration on the Emission of Particulate Matter, Nicotine, and Aldehydes from Narghil Waterpipes." Proceedings of the 2019 Tobacco Regulatory Science Meeting. Ed. -. Bethesda, MD: n.p.. *

Robinson, R. J. and E.C. Hensel. "Should Low Nicotine Eliquids be Considered Low Yield Products." Proceedings of the 2019 Tobacco Regulatory Science Meeting. Ed. -. Bethesda, MD: n.p.. *

Hensel, E.C., et al. "Hookah Topography in the Natural Environment to Inform Behavior-Based Design of Experiments for Emissions Testing." Proceedings of the 2019 Tobacco Regulatory Science Meeting. Ed. -. Bethesda, MD: n.p.. *

Meyers, B., et al. "Characterization of the wPUM™ Generation 3 Topography Monitors." Proceedings of the 2019 BMES Annual Meeting Biomedical Engineering Society (BMES). Ed. -. Philadelphia, PA: n.p.. *

Robinson, R.J. and E.C. Hensel. "A New Approach To Assess Yield Delivered To The Mouth Of Ends Users Based On Product Emissions And Natural Environment Topography." Proceedings of the Podium Presentaion 3: Symposium 12 Measurement of ENDS Exposure, Society for Research on Nicotine & Tobacco. Ed. -. San Francisco, CA: n.p.. *

Hensel, E.C., et al. "Framework to Report Total Particulate Matter and Aldehyde Emission Characteristics from Hookah." Proceedings of the Podium Presentaion 4: Symposium 15 Effects of Waterpipe Consituents and Design on Toxicity of Waterpipe Tobacco Smoke and Smoking Behaviors, Society for Research on Nicotine & Tobacco. Ed. -. San Francisco, CA: n.p.. *

View All Submissions

Robert Stevens

Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering

2019 Submissions

Published Conference Proceedings

Adhikari, Tejan and Robert J. Stevens. "Techno-Economic Analysis of Wireless Community Grid for Rural Communities." Proceedings of the IEEE Global Humanitarian Technology Conference. Ed. IEEE. Seattle, WA: n.p., Web. *

View All Submissions