Steven Day
Professor, Biomedical Engineering
Department of Biomedical Engineering
Kate Gleason College of Engineering
585-475-4738
Office Location
Office Mailing Address
106 Lomb Memorial Dr.
Steven Day
Professor, Biomedical Engineering
Department of Biomedical Engineering
Kate Gleason College of Engineering
Education
BS, Ph.D., University of Virginia; Diploma, von Karman Institute for Fluid Mechanics (Belgium)
Bio
Dr. Steven W. Day holds a B.S. in Mechanical Engineering and a Ph.D. in Aerospace Engineering from the University of Virginia as well as a diploma from the von Karman Institute for Fluid Dynamics, Belgium. He joined the faculty of KGCOE at RIT in 2005. Dr. Day has taught courses in mechanical and biomedical engineering programs and is active in guiding multidisciplinary senior design teams and advising graduate theses. He strives to promote critical thinking in his students and involves both undergraduates and graduate students in his research.
Dr. Day has expertise in application methods in experimental and computation fluid mechanics and biological flows. Past studies have included the analysis of naturally occurring biomechanical systems (multiple lung bifurcations), engineered systems (supersonic combustion engines), and the design and testing of biomedical devices (artificial heart pumps). During his first year of postgraduate research in Belgium, Dr. Day used a laser based system to study the flow through lung bifurcations. At the University of Virginia, his research focused on the development of a state-of-the-art implantable blood pump. On this project, he worked with a team of faculty and students from the Engineering and Medical Departments at UVa, as well as collaborators at the Utah Artificial Heart Institute at the University of Utah and industry partner MedQuest, Inc. His dissertation focused on experimental measurements of the pump performance and internal fluid dynamics and he contributed to published research on the computational modeling, electro/mechanical design, and physiological modeling of the device. Most recently, Dr. Day collaborated with a group of Evolutionary Biologists and experts in Biomechanics at the University of California, Davis on a series of studies involving the complex application of fluid dynamics to suction feeding in fish. All of these novel collaborative efforts effectively cross the traditional boundaries between the basic, medical, and applied sciences. For more about Dr. Day see his personal website.
Select Scholarship
Journal Paper
Roi, Avidan, Corrine Day, Steven W. Holzman,. "A power amplification dyad in seahorses." Proceedings of the Royal Society B: Biological Sciences 290. (2023): 20230520. Print.
W., Krisher, James A. Malinauskas, Richard A. Day, Steven. "The effect of blood viscosity on shear-induced hemolysis using a magnetically levitated shearing device." Artificial Organs 46. 6 (2022): 1027-1039. Print.
W., Goyal, Krittika Borkholder, David A. Day, Steven. "A biomimetic skin phantom for characterizing wearable electrodes in the low-frequency regime." Sensors and Actuators A: Physical 340. (2022): 113513. Print.
Throckmorton, Amy, et al. "Forward-thinking design solutions for mechanical circulatory support : multifunctional hybrid continuous-flow ventricular assist device technology." Annals of Cariothoracic Surgery. (2021): 3. Web.
Sul, Bora, et al. "Assessing Airflow Sensitivity to Healthy and Diseased Lung Conditions in a Computational Fluid Dynamics Model Validated in vitro." Journal of Biomechanical Engineering 140. 5 (2018): 14. Print.
Mix, Doran S, et al. "Manufacturing Abdominal Aorta Hydrogel Tissue-Mimicking Phantoms for Ultrasound Elastography Validation." JoVE (Journal of Visualized Experiments). 139 (2018): e57984. Web.
Hariharan, Prasanna, et al. "Inter-laboratory characterization of the flow field in the FDA blood pump model using particle image velocimetry (PIV)." Cardiovascular Engineering and Technology 9. 4 (2018): 623-640. Print.
Malinauskas, R., et al. "FDA Benchmark Medical Device Flow Models for CFD Validation." ASAIO Journal 63. 2 (2017): 150-160. Print.
Tchantchaleishvili, Vakhtang, et al. "Clinical Implications of Physiological Flow Adjustment in Continuous-Flow Left Ventricular Assist Devices." ASAIO Journal 63. 3 (2017): 241-250. Print.
Tchantchaleishvili, Vakhtang, et al. "Clinical Implications of Physiologic Flow Adjustment in Continuous-Flow Left Ventricular Assist Devices." ASAIO Journal November. (2016): PDF Preread. Print.
Liberson, Alexander S., et al. "A physics based approach to the pulse wave velocity prediction in compliant arterial segments." Journal of Biomechanics 49. 14 (2016): 3460-3466. Print.
Day, Steven W, et al. "Morphology, Kinematics, and Dynamics: The Mechanics of Suction Feeding in Fishes." Integrative and comparative biology 55. 1 (2015): 6-20. Print.
Lillie, Jeffrey S., et al. "Pulse Wave Velocity Prediction and Compliance Assessment in Elastic Arterial Segments." Cardiovascular Engineering and Technology 6. 1 (2015): 49-58. Print.
Wassenbergh, Sam Van, et al. "Suction Power Output and the Inertial Cost of Rotating the Neurocranium to Generate Suction in Fish." Journal of theoretical biology 372. (2015): 159-167. Print.
Myagmar, Oyungerel and Steven W Day. "The Evaluation of Blood Damage in a Left Ventricular Assist Device." Journal of Medical Devices 9. 2 (2015): 20914-1-2. Print.
Lillie, Jeffrey S., et al. "Pulse Wave Velocity Prediction and Compliance Assessment in Elastic Arterial Segments." Cardiovascular Engineering and Technology. (2014): forthcoming. Web.
Tartakoff, Joseph, Coley Duncan, and Steven W Day. "Component Validation of a High Power Transcutaneous Energy Transfer System." Journal of Medical Devices - Transactions of the ASME 8. 2 (2014): 1-2. Print.
Varbe, Nicole, et al. "In Vitro Hemodynamic Model of the Arm Arteriovenous Circulation to Study Hemodynamics of Native Arteriovenous Fistula and the Distal Revascularization and Interval Ligation Procedure." Journal of Vascular Surgery 59. 5 (2014): 1410-1417. Print.
Varble, Nicole, et al. "In Vitro Hemodynamic Model of the Arm Arteriovenous Circulation to Study Hemodynamics of Native Arteriovenous Fistula and the Distal Revascularization and Interval Ligation Procedure." Journal of Vascular Surgery Jul 11. (2013): online. Print.
Stewart, Sandy, et al. "Results of FDA's First Interlaboratory Computational Study of a Nozzle with a Sudden Contraction and Conical Diffuser." Cardiovascular Engineering and Technology 4. 4 (2013): 374-391. Print.
Stewart, Sandy F C, et al. "Assessment of CFD Performance in Simulations of an Idealized Medical Device: Results of FDA's First Computational Interlaboratory Study." Cardiovascular Engineering and Technology 3. 2 (2012): 139-160. Print.
Tchantchaleishvili, Vakhtang, et al. "An Ideal Power Source for Intracorporeal Ventricular Assist Devices." ASAIO Journal 58. 6 (2012): 550-553. Print.
Hariharan, P., et al. "Multilaboratory Particle Image Velocimetry Analysis of the FDA Benchmark Nozzle Model to Support Validation of Computational Fluid Dynamics Simulations." ASME Journal of Biomechanical Engineering 133. (2011): 1-14. Print.
Cheng, S., et al. "Optimization of a Hybrid Magnetic Bearing for a Magnetically Levitated Blood Pump via 3-D Finite Element Analysis." Mechatronics 21. 7 (2011): 1163-1169. Print.
Book Chapter
W., Goyal, Krittika Day, Steven. "Factors Affecting Wearable Electrode Performance and Development of Biomimetic Skin Phantom." New Advances in Biosensing. ?, ?: InTech Open, 2023. 1-18. Web.
Invited Keynote/Presentation
Day, Steven W, Matthew Poskus, and Thomas R Gaborski. "Computational Modeling of Blood Damage and Mass Transport in a Membrane-based Microfluidic Device." ASAIO Annual Meeting. ASAIO. Virtual, On Demand. 10-13 Jun. 2020. Conference Presentation.
Jacobs, Corinne, Steven W Day, and Roi Holzman. "The Power of Pivot Feeding: A Neglected Role For Power Amplification in Syngnathidae." Society of Integrative and Comparative Biology. SICB. Tampa, FL. 3-7 Jan. 2019. Conference Presentation.
Day, Steven W. and Robert J Stevens. "Contemporary Issues in ....": A New Course to Address Several Curricular Challenges." American Society of Engineering Education. St. Lawrence Section. ASEE. Syracuse, NY. 17 Apr. 2015. Conference Presentation.
Tchantchaleishvili, Vakhtang, Steven Day, and H Todd Massey. "Left Ventricular End-diastolic Pressure-dependent Passive and Active Flow Adjustment Scheme in Continuous-flow Left Ventricular Assist Devices." 60th Annual Meeting of ASAIO. ASAIO. Washington, DC. 20 Jun. 2014. Conference Presentation.
Published Conference Proceedings
Reuter, Steven P, et al. "Left Ventricular Assist Device Thrombus Detection Using Wavelets and Image Classification." Proceedings of the International Mechanical Engineering Congress and Exposition (IMECE). Ed. ASME IMECE. Portland, OR, Virtual: n.p., 2020. Web.
Prechtl, Ian R, Steven W Day, and Jason R Kolodziej. "An Acoustic Time-Frequency Approach to Condition Monitoring of Ventricular Assist Devices." Proceedings of the PHM Society Conference. Ed. ?. ?, ?: n.p., 2018. Web.
Hughes, Amy C., et al. "Experimental characterization, comparison and image quality assessment of two ultrasound contrast agents: Optison and Definity." Proceedings of the Proceedings of SPIE Medical Imaging 2016: Ultrasonic Imaging and Tomography. Ed. Neb Duric; Brecht Heyde. San Diego, California: n.p., Print.
Wheaton, Jay and Steven W Day. "Feasibility of Magnetized IVC Filter for Isolation of Circulating Cancer Cells." Proceedings of the ASME Frontiers in Medical Devices: Applications of Computer Modeling and Simlulation. Ed. ASME. http://proceedings.asmedigitalcollection.asme.org/proceedingbrowse.aspx, Web.
Full Patent
Refaii, Majed J. and Steven W. Day. "ABO Blood Group Point-of-Care Chip Testing." U.S. Patent U.S. Nonprovisional Patent Application No. 17/065,002, filed. 7 Oct. 2020.
Day, Steven W. "Motorized Wheel System for Pediatric Stander." U.S. Patent U.S. Patent Application Publication US 2019/0127011 A1 published. 2 May 2019.
Borkholder, David A., et al. "Pulse wave velocity, arterial compliance, and blood pressure." U.S. Patent U.S. Patent Application Publication US 2019/0083045 A1 published. 21 Mar. 2019.
Peer Reviewed/Juried Poster Presentation or Conference Paper
Sul, Bora, et al. "Computational Assessment of Airflow Sensitivity to Healthy and Diseased Lung Conditions." Proceedings of the Biomedical Engineering Society Annual Meeting. Ed. BMES. Phoenix, AZ: BMES.
Day, Steven W and Robert J Stevens. "Contemporary Issues In …. BIOENGINEERING”: A NEW REQUIRED COURSE ADDRESSING SEVERAL CURRICULAR CONCERNS." Proceedings of the ASME Summer Bioengineering, Biomechanics, Biotransport Conference. Ed. n/a. Washington, D.C.: n.p..
Raghunathan, Ramnath, Oyuna Myagmar, and Steven W Day. "Magnetically Levitated Shear Inducing Device for the Testing of Cell Fragility." Proceedings of the ASME Summer Bioengineering, Biomechanics, Biotransport Conference. Ed. n/a. Washington, D.C.: n.p..
Herbertson, Luke, A Paraloglou, and Steven W Day. "Mechanical Hemolysis Testing Across the Full Operating Range of a Centrifugal Blood Pump Model." Proceedings of the ASAIO. Ed. n/a. San Francisco, CA: n.p..
Phatak, Andy, Steven W Day, and Kathleen Lamkin-Kennard. "Relationship between force applied and velocity of contraction of air muscles." Proceedings of the ASME Summer Bioengineering, Biomechanics, Biotransport Conference. Ed. n/a. Washington, D.C.: n.p..
Full Length Book
Day, Steven W, Shanbao Cheng, and A. David Gomez. Mechanical Bearings for Mechanical Cardiac Assist Devices. : ASME Press / Momentum LLC, 2015. Print.
Published Article
Oakes, J. M., S. Day, S. J. Weinstein, and R. J. Robinson. “Flow field analysis in expanding healthy and emphysematous alveolar models using particle image velocimetry.” Journal of Biomechanical Engineering, 132.2 (2010): 021008-1-9. Web. " É *
Day, S. W., T. E. Higham, and P. C. Wainwright. “Timeresolved measurements of the flowgenerated by suction feeding fish.” Animal Locomotion, The Physics of Flying,The Hydrodynamics of Swimming, 2010. 75-86. Print. *
Formal Presentation
Cheng, S.X., and S.W.Day. “Design and Control of Hybrid Magnetic Bearings for Maglev Axial Flow Blood Pump.” 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Montreal, Canada. 6-9 July 2010. Presentation.
Stewart S. F.C., Eric G. Paterson, Greg W. Burgreen, Prasanna Hariharan, Steven W. Day, Varun Reddy, Matthew Giarra, Keefe B. Manning, Steven Deutsch, Matthew R. Myers, Michael R. Berman, and Richard A. Malinauskas. “Turbulence Modeling as a Source of Error In FDA’s “Critical Path”Interlaboratory Computational Study Of Flow In A Nozzle Model.” ASAIO 56thAnnual Conference. Baltimore, MD. 27-29 May 2010. Presentation.
Olles, Mark W., Arnold D. Gomez, Don B. Olsen, and Steven W. Day.” Fluidic Performance via Intrinsic Parameters of a Magnetically Levitated Axial Flow VAD.” ASAIO 56th Annual Conference. Baltimore, MD. 27-29 May 2010. Presentation.
Day, Steven, Mark W. Olles, Shanbao Cheng, Arnold D.Gomez, Ronald W. Kipp, Lyle D. Joyce, andDon B. Olsen. “Acute Animal Experiments of a Magnetically Levitated Axial Flow VAD.” ASAIO 56th Annual Conference.Baltimore, MD. 27-29 May, 2010. Presentation. "
Currently Teaching
BIME-320
Fluid Mechanics
3 Credits
This course exposes students to the fundamentals of static and flowing fluids at both large-scale (control volumes) and local differential scales. Student learn how to examine forces on solids due to static and flowing fluids, estimate head losses and pumping requirements in piping systems. The art of engineering approximation is examined through estimates of forces due to flow on solids, as well as limiting cases involving internal pipe flows with friction factors. Exact solutions of local differential equations of fluid mechanics are considered under both steady state and transient conditions, and these analyses are used to determine forces in control volume analysis of bodies. The important interplay between differential and control volume analyses in solving problems is emphasized. Lastly, students are taught to make analogies about the concepts learned in generic fluid mechanics and apply them to the circulatory system, while outlining appropriate limitations.
BIME-395
Biomed.Instr. Repair & Maintenance for Eng.World Health
0-2 Credits
This is a course that will prepare students for an international trip as part of Engineering World Health, they will be stationed in hospitals and assist with repairmen and maintenance of medical equipment and instrumentation. To this end, the course will cover both technical and cultural aspects of the trip, including language and cultural norms. From a technical standpoint, the course will cover the basics of the major types of medical equipment and their operation. The physiology underlying the measurement of each equipment will also be discussed. In addition, the course will focus on the major functional pieces for each instrument, and troubleshooting in the context of a developing country environment. A travel fee is required.
BIME-396
Biomedical Instr. Repair & Maintenance for EWH 2
1-3 Credits
This is the second part 2 of the Engineering World Healthy course and it follows the first part of the course that is taught during the Fall semester. Students participating in this course will have completed the international trip where they spent close to 3 weeks working in various hospitals in the developing country. During this course (part 2), we will focus on identifying the strengths and weaknesses of the students’ preparation for the trip, review and record what they learned and experienced on the ground, develop ways on how to improve the experience for both students and hospital staff. Much of this is intended to increase students’ leadership skills and awareness of global engineering challenges. To this end, students will be required to come up with ways to disseminate to their fellow students and campus at large the knowledge they acquired during their experience.
BIME-499
Co-op
0 Credits
One semester of paid work experience in biomedical engineering.
BIME-625
Measurement Techniques in Fluid Mechanics
3 Credits
The course provides an introduction and survey to measurement techniques used in fluid mechanics. The material is designed to cover a range of techniques for measuring the primary physical properties: pressure, velocity, concentration, temperature. There is an emphasis on awareness and quantification of the theoretical strengths and limitations of each method, as well as the practical complexities of using each technique.