MECHANICAL ENGINEERING

To view listing from a different department, select department name from the right.

Margaret BaileyWE@RIT Executive Director
Associate to the Provost for Female Faculty at RIT

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2010 Submissions

Published Article

George, E., M. Bailey and W. Domigan. “Health monitoring methodology based on exergetic analysis for building mechanical systems.” Energy: The International Journal, 35.3 (2010): 1216—1223. Web. "  «

Canfield, E., M. Bailey, and W. Domigan. “Creation of an exergetic based fault detection and diagnosis methodology for automotive carbon dioxide air conditioning systems.” International Journal of Applied Thermodynamics, 13.1 (2010): 1-8. Web. "  «

Reisberg, R., M. Bailey, J. Raelin, D. Whitman, C. Burger, and J. Hamann. “The effect of gender on support and self-efficacy and self-efficacy in undergraduate engineering programs.” 2010 ASEE Annual Conference and Exposition, 20-23 June 2010. n.p. Web. É  «

Domigan, W., and M. Bailey. “Comparative thermodynamic performance of a cogeneration power plant using plant operational data.” ECOS 2010: International Conference on Efficiency, Costs, Optimization, Simulation and Environmental Impact of Energy Systems, 14-17 June 2010. n.p. Web. " «

Published Book

Moran, M., H. Shapiro, D. Boettner, and M. Bailey. Fundamentals of Engineering Thermodynamics, 7th Edition. Hoboken, NJ: John Wiley & Sons, Inc., 2010. Print. É 

View All Submissions

Stephen Boedo

Associate Professor
Mechanical Engineering
Kate Gleason College of Engineering

2010 Submissions

Published Article

Demiri, S., S. Boedo, and W.J. Grande. “Conformality Effects on the Wear of Low-Speed, Large Aspect Ratio Silicon Journal Microbearings.” Wear, 268.3-4 (2010): 361-372. Web. "  É  *

Booker, J.F., S. Boedo, and D. Bonneau. “Conformal EHL Analysis for Engine Bearing Design: A Brief Review.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 224.12 (2010): 2648-2653. Web. *

Boedo, S., “Mass Conserving Cavitation Effects in Squeeze-Film Journal Bearings Subjected to Fully Reversing Loads.” Proceedings of the STLE/ASME International Joint Tribology Conference, 17-20 Oct. 2010. 1-3. Web. *

Demiri, S., and S. Boedo. “Clearance Effects on the Impact Behavior of Large Aspect Ratio Silicon Journal Microbearings.” Proceedings of the STLE/ASME International Joint Tribology Conference, 17-20 Oct. 2010. 1-3. Web. "  É  *

Boedo, S. “Practical Tribological Issues in Big End Bearings.” Tribology and Dynamics of Engine and Powertrain: Fundamentals, Applications, and Future Trends, 2010. 615-634. Print. *

View All Submissions

Tuhin Das

Assistant Professor
Mechanical Engineering
Kate Gleason College of Engineering

2010 Submissions

Published Article

Das, Tuhin, Sridharan Narayanan, and Ranjan Mukherjee. “Steady-State and Transient Analysis of a Steam Reformer Based Solid Oxide Fuel Cell System.” Journal of Fuel Cell Science and Technology, 7.1 (2010): 011022-1-10. Web. *

Das, Tuhin, and Andrew Slippey. “Observer based Transient Fuel Utilization Control for Solid Oxide Fuel Cells.” Proceedings of the ASME 2010 Dynamic Systems and Control Conference, 12-15 Sept. 2010. Web. "  É  *

Allag, Tahar, and Tuhin Das. “Robust Nonlinear Control of Fuel Cell Ultra-Capacitor Hybrid System.” American Control Conference, 30 June - 2 July, 2010. 6923-6929. Web. "  É  *

View All Submissions

Steven Day

Assistant Professor
Mechanical Engineering
Kate Gleason College of Engineering

2010 Submissions

Formal Presentation

Cheng, S.X., and S.W.Day. “Design and Control of Hybrid Magnetic Bearings for Maglev Axial Flow Blood Pump.” 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics. Montreal, Canada. 6-9 July 2010. Presentation.

Stewart S. F.C., Eric G. Paterson, Greg W. Burgreen, Prasanna Hariharan, Steven W. Day, Varun Reddy, Matthew Giarra, Keefe B. Manning, Steven Deutsch, Matthew R. Myers, Michael R. Berman, and Richard A. Malinauskas. “Turbulence Modeling as a Source of Error In FDA’s “Critical Path” Interlaboratory Computational Study Of Flow In A Nozzle Model.” ASAIO 56th Annual Conference. Baltimore, MD. 27-29 May 2010. Presentation.

Olles, Mark W., Arnold D. Gomez, Don B. Olsen, and Steven W. Day.” Fluidic Performance via Intrinsic Parameters of a Magnetically Levitated Axial Flow VAD.” ASAIO 56th Annual Conference. Baltimore, MD. 27-29 May 2010. Presentation.

Day, Steven, Mark W. Olles, Shanbao Cheng, Arnold D. Gomez, Ronald W. Kipp, Lyle D. Joyce, and Don B. Olsen. “Acute Animal Experiments of a Magnetically Levitated Axial Flow VAD.” ASAIO 56th Annual Conference. Baltimore, MD. 27-29 May, 2010. Presentation. " 

Published Article

Oakes, J. M., S. Day, S. J. Weinstein, and R. J. Robinson. “Flow field analysis in expanding healthy and emphysematous alveolar models using particle image velocimetry.” Journal of Biomechanical Engineering, 132.2 (2010): 021008-1-9. Web. " É *

Day, S. W., T. E. Higham, and P. C. Wainwright. “Time resolved measurements of the flow generated by suction feeding fish.” Animal Locomotion, The Physics of Flying, The Hydrodynamics of Swimming, 2010. 75-86. Print. *

View All Submissions

Satish KandlikarGleason Professor of Mechanical Engineering

Professor
Mechanical Engineering
Kate Gleason College of Engineering

2010 Submissions

Editor (book or journal)

Kandlikar, S.G., ed. Heat Exchanger Design Handbook. Redding, CT: Begell House, 2010. Print.

Published Article

Kandlikar, S. G. “1. Scale effects on flow boiling heat transfer in microchannels: A fundamental perspective.” International Journal of Thermal Sciences, 132.7 (2010): 1073-1085. Print.

Kandlikar, S. G. “A Scale Analysis Based Theoretical Force Balance Model for Critical Heat Flux (CHF) During Saturated Flow Boiling in Microchannels and Minichannels.” Journal of Heat Transfer, 132.8 (2010): 081501-1-13. Print.

Brackbill, T.P., and S.G. Kandlikar. “Application of Lubrication Theory and Study of Roughness Pitch During Laminar, Transition, and Low Reynolds Number Turbulent Flow at Microscale.” Heat Transfer Engineering, 31.8 (2010): 634-645. Print. " É 

Lu, Z., M.M. Daino, C. Rath, and S.G. Kandlikar. “Water Management Studies in PEM Fuel Cells, Part III: Dynamic Breakthrough and Intermittent Drainage Characteristics from GDLS with and without MPLS.” International Journal of Hydrogen Energy, 35.9 (2010): 4222-4233. Print. " É 

Kandlikar, S. G. “Similarities and Differences Between Flow Boiling in Microchannels and Pool Boiling.” Heat Transfer Engineering, 31.3 (2010): 159-167. Print. *

Formal Presentation

Dharaiya, V.V., R.R. Srivastava, and S.G. Kandlikar. “Numerical Investigation of Heat Transfer Effects in Microchannels under H2 Boundary Condition.” 2010 ITC 14th International Heat Transfer Conference. Washington, DC. 8-13 August 2010. Presentation. " 

Lu, Yen-Wen, and S.G. Kandlikar. “Review of Nanoscale Surface Modification Techniques for Pool Boiling Enhancement.” ASME International Conference on Nanochannels, Microchannels, and Minichannels (ICNMM). Montreal, Canada. 30 Aug. - 1 Sept. 2010. Presentation.

Kandlikar, S.G., Z. Lu, and M. L. Garofalo. “Water Management in a PEMFC: Water Transport Mechanism and Material Degradation in Gas Diffusion Layers.” 2nd CARISMA International Conference on Progress in MEA Materials for Medium and High Temperature Polymer Electrolyte Fuel Kate Gleason College of Engineering Cells. La Grande Motte, France. 19-22 Sept. 2010. Presentation. " 

View All Submissions

Robert Stevens

Assistant Professor
Mechanical Engineering
Kate Gleason College of Engineering

2010 Submissions

Published Article

Sandoz-Rosado, E., and R.J. Stevens. “Robust Finite Element Model for the Design of Thermoelectric Modules.” Journal of Electronic Materials, 39.9 (2010) 1848-1855. Print. *

View All Submissions