Patricia Iglesias Victoria Headshot

Patricia Iglesias Victoria

Associate Professor

Department of Mechanical Engineering
Kate Gleason College of Engineering

585-475-7694
Office Location

Patricia Iglesias Victoria

Associate Professor

Department of Mechanical Engineering
Kate Gleason College of Engineering

Education

BS, Ph.D., Polytechnic University of Cartagena (Spain)

585-475-7694

Select Scholarship

Journal Paper
Viesca, Jose Luis, et al. "Miscibility, corrosion and environmental properties of six hexanoate- and sulfonate-based protic ionic liquids." Journal of Molecular Liquids 322. (2021): xxx. Web.
Guo, Hong and Patricia Iglesias. "Tribological behavior of ammonium-based protic ionic liquid as additive." Friction 9. 1 (2021): 169-178. Web.
Guo, H., T. W. Smith, and P. Iglesias. "The Study of Hexanoate-based Protic Ionic Liquids Used as Lubricants in Steel-steel Contact." Journal of Molecular Liquids 299. (2020): 112208. Web.
Guo, Hong, Junru Pang, and A.R. Adukere. "nfluence of Hydrogen Bonding and Ionicity of Protic Ionic Liquids on Lubricating Steel–Steel and Steel–Aluminum Contacts: Potential Ecofriendly Lubricants and Additives." Tribology Letters 68. 4 (2020): 1-10. Web.
Guo, Hong, Thomas Smith, and Patricia Iglesias. "The study of hexanoate-based protic ionic liquids used as lubricants in steel-steel contact." Journal of Molecular Liquids 299. (2020): XXX. Web.
Guo, Hong, et al. "Lubricating Ability of Magnesium Silicate Hydroxide–Based Nanopowder as Lubricant Additive in Steel–Steel and Ceramic–Steel Contacts." Tribology Transactions. (2020): 1-12. Web.
Guo, H., R. Adukere, and P. Iglesias. "Effect of Ionicity of Three Protic Ionic Liquids as Neat Lubricants and Lubricant Additives to a Biolubricant." Coatings 9 (11). (2019): 713. Web.
Sol, I. del, et al. "Tribological Performance of Ionic Liquids as Additives of Water-based Cutting Fluids." Wear 426-427. Part A (2019): 845-852. Web.
Salguero, J., et al. "Effect of Laser Parameters on the Tribological Behavior of Ti6Al4V Titanium Microtextures Under Lubricated Conditions." Wear 426-427. Part B (2019): 1272-1279. Web.
Vazquez-Martinez, J. M., et al. "Assessment the Sliding Wear Behavior of Laser Microtexturing Ti6Al4V under Wet Conditions." Coatings 9. 67 (2019): 121. Web.
Kudtarkar, K., et al. "Effects of Chemical Composition on the Electromechanical Properties of Polymer Ionic-liquid Gel Beads." J. Fluids Eng 140. 10 (2018): 101103-1-6. Web.
Matczak, L, et al. "Effect of Cation Nature on the Lubricating and Physicochemical Properties of Three Ionic Liquids." Tribology International 124. (2018): 23-33. Web.
Tock, A, et al. "Tribological Performance of Textured Surfaces Created by Modulation Assisted Machining." ASME Journal of Tribology 140. 6 (2018): 061704-1-8. Web.
Metha, P., et al. "Effect of Textured Surfaces Created by Modulation Assisted Machining on the Stribeck Curve and Wear Properties of Steel–aluminum Contact." Int. J. Adv. Manufaturing Technol 99. 1-4 (2018): 399-409. Web.
Schertzer, M. and P. Iglesias. "Meta-Analysis Comparing Wettability Parameters and the Effect of Wettability on Friction Coefficient in Lubrication." Lubricants 6. 70 (2018): N/A. Web.
Patel, A., H. Guo, and P. Iglesias. "Study of the Lubricating Ability of Protic Ionic Liquid on an Aluminum–Steel Contact." Lubricants 6. 70 (2018): N/A. Web.
Kudtarkar, K., et al. "Effect of Metallization on the Electromechanical Properties of Microfluidically Synthesized Hydrogel Beads." J. Fluids Eng 141. 3 (2018): 031303-1-6. Web.
Saurin, N., et al. "Carbon Nanophases in Ordered Nanofluid Lubricants." Wear. 2017 WOM special issue (2017): 747-755. Web.
Saurin, N., et al. "Carbon Nanophases in Ordered Nanofluid Lubricants." Wear 376-377. (2017): 747-755. Web.
E.Cigno, , et al. "Lubricating Ability of Two Phosphonium-Based Ionic Liquids as Additives of a Bio-Oil for use in Wind Turbines Gearboxes." Wear 376-377. (2017): 747-755. Web.
Janardhanan, Karthik and Patricia Iglesias. "Theoretical and Experimental Study of the Friction Behavior of Halogen-Free Ionic Liquids in Elastohydrodynamic Regime." Lubricants Nanoparticles and Ionic Liquids in Lubrication special issue-4. 2 (2016): 1-12. Web.
Gutierrez, M.A., M. Haselkorn, and Patricia Iglesias. "The Lubrication Ability of Ionic Liquids as Additives for Wind Turbine Gearboxes." Lubricants 4. 2 (2016): -. Web.
Cigno, E., et al. "Lubricating Ability of Two Phosphonium-based Ionic Liquids as Additives of a Bio-oil for use in Wind Turbines Gearboxes-in Press." Wear. 2017 WOM Special issue (2016): -. Web.
Grace, J., et al. "Ionic Liquids as Additives of Coffee Bean Oil in Steel-Steel Contacts." Lubricants 3. (2015): 637-649. Web.
Ghandhi, R., et al. "Surfaces by Vibration/Modulation-Assisted Texturing for Tribological Applications." Int J Adv Manuf Technol. (2015): 1-12. Web.
Iglesias, P., et al. "Steel Machining Chips as Reinforcements to Improve Sliding Wear Resistance of Metal Alloys: Study of a Model Zn-based Alloy System." Wear 65. (2013): 215-227. Web.
Peer Reviewed/Juried Poster Presentation
Stoyanovich, B., H. Guo, and P. Iglesias. "Protic Ionic Liquids as Lubricants and Lubricant Additives." Proceedings of the ASEE 2021 Virtual St. Lawrence Section Conference- Best poster award. Ed. ASEE. Virtual, USA: n.p..
Gaikwad, A., et al. "Effect of laser texturing and dimple density on tribological properties of titanium-ceramic contact." Proceedings of the 23rd International Conference on Wear of Materials. Ed. Wear of Materials Conference. Virtual, USA: n.p..
Stoyanovich, B., P. Iglesias, and H. Guo. "Low cost, environmentally-friendly Protic Ionic Liquids as lubricants and lubricant additives." Proceedings of the 2020 STLE Tribology Frontiers Virtual Conference. Ed. STLE. Virtual, USA: n.p..
Guo, H., et al. "Study of linear alkyl-benzenesulfonate-based protic ionic liquids as lubricant additives." Proceedings of the 23rd International Conference on Wear of Materials. Ed. Wear of Materials Conference. Virtual, USA: n.p..
Liu, R., et al. "Influence of Micro-Scale Textures on the Lubrication Regime of Frictional Surfaces." Proceedings of the 21th International Conference on Wear of Materials. Ed. WOM 2017. Long Beach, CA: WOM.
Guo, H. and P. Iglesias. "Investigation of Ionic Liquids as Neat Lubricants, Additives of Lubricants and Thin-Film Lubricant Layers." Proceedings of the 21th International Conference on Wear of Materials. Ed. WOM 2017. Long Beach, CA: WOM.
Book Chapter
Guo, Hong and Patricia Iglesias. "Ionic Liquids as High-Performance Lubricants and Lubricant additives, in Ionic Liquids." Thermophysical Properties and Applications. London, United Kingdom: intechopen, 2021. 100-124. Web.
Published Conference Proceedings
H.Guo, and P.Iglesias. "Tribological Properties of Ammonium Protic Ionic Liquids As Additives in Polyalphaolefin for Steel-Steel Contact." Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition, IMECE2018-10645. Ed. ASME. Salt Lake City, Utah: n.p., Web.
S.A.Magar, , H.Guo, and P. Iglesias. "Ionic Liquid As Cutting Fluid Additive Using Minimum Quantity Lubricant (MQL) in Titanium-Ceramic Contact." Proceedings of the ASME 2019 International Mechanical Engineering Congress and Exposition, IMECE2018-10645. Ed. ASME. Salt Lake City, Utah: n.p., Web.
Guo, H. and P. Iglesias. "Investigation of Protic Ionic Liquids Used as Lubricants (Abstract only)." Proceedings of the 2019 STLE Tribology Frontiers Conference. Ed. STLE. Chicago, Ill: n.p., Web.
Sol, I. del, et al. "Tribological Performance of Ionic Liquids as Additives of Water-based Cutting Fluids." Proceedings of the 22th International Conference on Wear of Materials. Ed. WOM. Miami, Fl: n.p., Web.
Salguero, J., et al. "Effect of Laser Parameters on the Tribological Behaviour of Ti6Al4V Titanium Microtextures Under Lubricated Conditions (Abstract only)." Proceedings of the 22th International Conference on Wear of Materials. Ed. WOM. Miami, Fl: n.p., 2019. Web.
Ferri, Chris, et al. "Ionic Liquids as Additves to Cutting Fluids to Reduce Machine tool Friction and Wear." Proceedings of the ASME 2018 International Mechanical Engineering Conference and Exposition. Ed. ASME. Pittsburgh, PA: n.p., Web.
Guo, H., et al. "The Effects of Single-Walled Carbon Nanotubes and Ionic Liquids in reduction of Friction and Wear." Proceedings of the ASME 2018 International Mechanical Engineering Conference and Exposition. Ed. ASME. Pittsburgh, PA: n.p., 2018. Web.
Gutierrez, M. A., et al. "Effect of Carbon Nanotube-Phosphinate Ionic Liquid Thin Boundary Layer on the Tribological Behavior of Aluminum Alloy in Steel-on-Aluminum contact." Proceedings of the ASME 2018 International Mechanical Engineering Conference and Exposition. Ed. ASME. Pittsburgh, PA: n.p., 2018. Web.
Magar, S., H. Guo, and P. Iglesias. "Estimation of Energy Conservation in Internal Combustion Engine Vehicles using Ionic Liquids as Additive." Proceedings of the ASME 2018 International Mechanical Engineering Conference and Exposition. Ed. ASME. Pittsburgh, PA: n.p., 2018. Web.
A.Tock, , et al. "Wear Performance of New Textured Surfaces Created by Modulation Machining." Proceedings of the ASME 2017 International Mechanical Engineering Congress and Exposition IMECE2017. Ed. ASME. Tampa, FL: ASME, 2017. Web.
Guo, H., et al. "Wear Performance of New Textured Surfaces Created By Modulation Machining." Proceedings of the Power Transmission and Gear Conference, ASME 2017 IDETC/CIE. Ed. ASME. Cleveland, OH: ASME, 2017. Web.
Kothuru, A., et al. "Wear Performance of New Textured Surfaces Created By Modulation Machining." Proceedings of the Power Transmission and Gear Conference, ASME 2017 IDETC/CIE. Ed. ASME. Cleveland, OH: ASME, 2017. Web.
Fuentes, A., et al. "Fillet Geometry Modeling for Nongenerated Gear Tooth Surfaces." Proceedings of the International Conference on Power Transmissions ICPT 2016. Ed. Datong Qin. Chongqing, China: n.p., Print.
Bain, D., et al. "Synthetic and Organic Supercharger Lubrication: The Tribological Performance of Ionic Liquids as Additives to Lubricants." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016. Ed. ASME. Phoenix, Az: n.p., Web.
Bossung, K., et al. "Effect of Halogen-free Ionic Lliquids as Additives of Biolubricants for Room Temperature Titanium-steel Contact." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016. Ed. ASME. Phoenix, Az: n.p., Web.
Matczak, L., et al. "Characterization of Novel High Performance Lubricants." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016. Ed. ASME. Phoenix, Az: n.p., Web.
Stringer, B., et al. "Effect of Cutting Conditions on Dimensional Accuracy and Surface Roughness in Traditional Milling of Steel." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016. Ed. ASME. Phoenix, Az: n.p., Web.
Kudtarkar, K.A., et al. "Microfluidic Synthesis of Polymer Ionic Liquid Gel Beads for Energy Harvesting Applications." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition IMECE2016. Ed. ASME. Phoenix, Az: n.p., Web.
Gupta, S. and P. Iglesias. "Atomic Force Microscopy of Annealed Plain Carbon Steels." Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition. Ed. American Society of Mechanical Engineers. Houston, Tx: ASME, Web.
Curtin, P., S. Constantinides, and P. Iglesias. "Fracture Toughness of Samarium Cobalt Magnets." Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition. Ed. American Society of Mechanical Engineers. Houston, Tx: ASME, Web.
Ochs, E. and P. Iglesias. "Graduation Design Project: Designing and Building a Pin-on-Disk Tribometer." Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition. Ed. American Society of Mechanical Engineers. Houston, TX: ASME, Web.
Iglesias, P., G. Behm, and T. Oh. "Intelligent Mobility Cane for People Who are Blind and Deaf-Blind: A Multidisciplinary Design Project that Assists People with Disabilities." Proceedings of the ASME 2015 International Mechanical Engineering Congress and Exposition. Ed. American Society of Mechanical Engineers. Houston, Tx: n.p., Web.
Iglesias, P. and K.B. McNabb. "Improving Wear Performance of Wind Turbine Gearboxes Using Ionic Liquids as Additives of Lubricants." Proceedings of the IberTrib 2015. VIII Iberian Conference on Tribology. Ed. M.D. Bermudez. Cartagena, Murcia (Spain): Polytechnic University of Cartagena, Print.
Iglesias, P., et al. "Tribological Properties of Plunging-Type Textured Surfaces Produced by Modulation-Assisted Machining." Proceedings of the IberTrib 2015. VIII Iberian Conference on Tribology. Ed. M.D. Bermudez. Cartagena, Murcia (Spain): Polytechnic University of Cartagena, Print.
M.J.Schertzer, , et al. "Recent Developments in Engineering Measurements Lab." Proceedings of the 122nd ASEE Annual Conference & Exposition. Ed. American Society for Engineering Education. Seatle, WA: ASEE, Web.
Iglesias, Patricia, et al. "Microstructural Characterization of Sm-Co Magnets." Proceedings of the ASME 2014 International Mechanical Engineering Conference & Exposition IMECE2014. Ed. American Society of Mechanical Engineers. Montreal, Quebec: n.p., Web.
Schertzer, Michael J., et al. "Enhancement of the Thermo-Fluid Measurement Laboratory for Semester Conversion." Proceedings of the 121st ASEE Annual Conference & Exposition. Ed. American Society for Engineering Education. Washington, DC: n.p., Web.
Walter, W.W., et al. "Investigation of the Benefits of Using a Case Study Method to Teach Mechanical Engineering Fundamentals Courses to Deaf and Hard of Hearing Students." Proceedings of the 120th ASEE Annual Conference & Exposition. Ed. American Society for Engineering Education. Washington, DC: n.p., Web.
Jimenez, A.E., et al. "A Study of the Wear Resistance of Kirksite Zn-Al-alloy and Kirksite-steel Composites." Proceedings of the 39th Leeds-Lyon Tribology Conference. Ed. The University of Leeds. Leeds, England: n.p., Web.
Oh, T., P. Iglesias, and G. Behm. "Utilizing Haptic Device with Mobility Cane to Guide the Deaf-blind in Real-time Obstacle Avoidance." Proceedings of the UKC 2013. Ed. Korean-American Scientist and Engineers Association. Vienna, VA: n.p., Print.
Shows/Exhibits/Installations
Iglesias, Patricia. Tribology Laboratory at Kate Gleason College of Engineering. n.d. CEIS University Technology Showcase 2016, Rochester. Exhibit.
Iglesias, P. Ionic Liquids as Additives in Gearboxes Lubricants of Wind Turbines. 14 Apr. 2015. 20th International Conference on Wear of Materials, Toronto. Exhibit.
Iglesias, P. Wear Performance of New Textured Surfaces created by Modulation Machining. By D. Sebastian and C. Saldana. 15 Apr. 2015. 20th International Conference on Wear of Materials, Toronto. Exhibit.
Oh, T. Intelligent Mobility Cane Prototype with Navigation for People who are Blind and Deafblind. By P. Iglesias, et al. 10 Nov. 2015. Third Annual Effective Access Technology Conference, Rochester. Exhibit.
Iglesias, P. Ionic Liquids as Additives in Gearboxes Lubricants of Wind Turbines. n.d. CEIS University Technology Showcase 2015, Rochester. Exhibit.
Iglesias, P. Wear Performance of New Textured Surfaces Created by Modulation Machining”. n.d. CEIS University Technology Showcase 2015, Rochester. Exhibit.
Behm, Tae Oh, Patricia Iglesias, Gary. Designing and Developing an Innovative Smart Cane for People who are Blind and Deaf-Blind. By Tae Oh, Patricia Iglesias, and Gary Behm. 20 Oct. 2014. 16th International ACM SIGACCESS Conference on Computers and Accessibility (ASSETS 2014), Rochester. Exhibit.
Invited Keynote/Presentation
Iglesias, Patricia, et al. "Prediction of the Frictional Properties of Halogen-free Ionic Liquids in Elastohydrodynamic Contacts." 2016 STLE Tribology Frontiers Conference,. STLE. Chicago, Ill. 13 Nov. 2016. Conference Presentation.
Iglesias, Patricia, et al. "Phosphonium-based Ionic Liquids as Additives of Mineral Oils in Steel-steel Contacts." 2016 STLE Tribology Frontiers Conference,s. STLE. Chicago, Ill. 13 Nov. 2016. Conference Presentation.
Sebastian, D., et al. "Tribological Properties of Textured Surfaces Created by Modulation Assisted Machining (MAM)." STLE 2015 70th Annual Meeting and Exhibition of Society of Tribologists and Lubrication Engineers. STLE. Dallas, Tx. 18 May 2015. Conference Presentation.
Mc.Nabb, K.B., D.Sebastian, and P. Iglesias. "Developing New Lubricants for Wind Turbine Gearboxes." STLE 2015 70th Annual Meeting and Exhibition of Society of Tribologists and Lubrication Engineers. Society of Tribologist and Lubrication Engineers. Dallas, Tx. 20 May 2015. Conference Presentation.
Iglesias, Patricia, et al. "Protic and Aprotic Ionic Liquids." 69th Society of Tribologist and Lubrication Engineers Annual Meeting. STLE. Orlando, Florida. 18 May 2014. Conference Presentation.

Currently Teaching

MECE-350
3 Credits
This course provides a continuation of concepts pertaining to the mechanics of deformable media and their relation to the failure of materials. Failure topics pertaining to yielding, buckling, fracture, and fatigue for structures under static and dynamic loading conditions are discussed. A function-constraints-objective approach to the mechanical design process is introduced.
MECE-203
3 Credits
A basic course in the fundamental principles of the mechanics of deformable media, including stress, strain, deflections and the relationships among them. The basic loadings of tension, compression, shear, torsion and bending are also included.

In the News