Faculty Research

Select Faculty Scholarship

An ever growing body of research is produced by Golisano Institute for Sustainability faculty at RIT, in a wide range of focuses and formats. Their professional accomplishments include books, journal articles, national and international presentations, provisional and full patents, and more. Each of these achievements contribute directly to RIT's reputation as a scholarship leader.

×

Giovannini, Paolo and Giovanna Potesta'. San Donato a Novoli: da area industriale a centralita' urbana. 1 ed. Florence, Italy: Polistampa, 2004. Print.

Bitterman, Alex. Design Survey: A Workbook Introduction to the Design Professions. 2nd ed. New York, NY: Pearson, 2011. Print.

Trabold, Thomas A. and Callie W. Babbitt. Sustainable Food Waste-to-Energy Systems. London, England: Academic Press, 2018. Print.

Trabold, T and CW Babbitt. Sustainable food waste-to-energy systems. Cambridge, MA: Elsevier Academic Press, 2018. Print.

Kahhat, Ramzy, Klaus Hieronymi, and Eric Willilams. E-waste Management: From Waste to Resource. 1st ed. New York, NY: Routledge, 2012. Print.

Jones, Thomas B. and Nenad G. Nenadic. Electromechanics and MEMS. 1st ed. London/New York, New York: Cambridge University Press, 2013. Print.

Nicotera, P.D., C. Ji, and T.A. Trabold. "Co-Deposition of Conductive Material at the Diffusion Media/Plate Interface." U.S. Patent 9,653,737. 16 May 2017.

Waller, Michael G., Mark M. Walluk, and Thomas A. Trabold. "Compact Fuel Cell System." U.S. Patent Application 62183885. 24 Jun. 2015.

Owejan, John P., et al. "Bipolar Plate Features for Mitigation of Exit Water Retention." U.S. Patent 9,153,826. 6 Oct. 2015.

Dadheech, Gayatri V., Thomas A. Trabold, and Mahmoud H. Abd Elhamid. "Low Cost fuel Cell Bipolar Plate and Process for Making the Same." U.S. Patent 9,136,545. 15 Sep. 2015.

Winter, Gerhard, et al. "Hydrophilic Coating for Fuel Cell Bipolar Plate and Methods of Making the Same." U.S. Patent 9,029,046. 12 May 2015.

Dadheech, Gayatri V., et al. "Amorphous Carbon Coatings for Fuel Cell Bipolar Plates." U.S. Patent 8,956,785. 17 Feb. 2015.

Owejan, Jon P., et al. "PEM Fuel Cell stack Inlet Water Regulation System." U.S. Patent Application US20150093673. 2 Apr. 2015.

Nasr, Nabil and Mark Walluk. "Three Dimensional Non-Shadowing Sterilizer." U.S. Patent 62/360,697. 11 Jul. 2016.

Potesta, Giovanna. "Smart Cities and Place Making; The "Sense of Place" in the Implementation of Smart Cities in the Arabian Gulf." Smart Cities in the Gulf. Current State, Opportunities, and Challenges. Ed. Wael A. Samad and Elie Azar. Singapore, Singapore: Palgrave Macmillan, 2018. 223-246. Print.

Bitterman, Alex. "Color The World: Identifying Color Trends in Contemporary City Brands." Color & Design. Ed. Marilyn DeLong and Barbara Martinson. London, England: Berg Publishers, 2012. Chapter 17. Print.

Trabold, Thomas A. and Callie W. Babbitt. "Chapter 1: Introduction." Sustainable Food Waste-to-Energy Systems. Ed. Thomas A. Trabold and Callie W. Babbitt. London, England: Academic Press, 2018. 1-10. Print.

Trabold, Thomas A., Shwe Sin Win, and Swati Hegde. "Chapter 2: Waste Resources in the Food Supply Chain." Sustainable Food Waste-to-Energy Systems. Ed. Thomas A. Trabold and Callie W. Babbitt. London, England: Academic Press, 2018. 11-28. Print.

Trabold, Thomas A. and Vineet Nair. "Chapter 3: Conventional Food Waste Management Methods." Sustainable Food Waste-to-Energy Systems. Ed. Thomas A. Trabold and Callie W. Babbitt. London, England: Academic Press, 2018. 29-45. Print.

Hegde, Swati and Thomas A. Trabold. "Chapter 5: Sustainable Waste-to-Energy Technologies: Fermentation." Sustainable Food Waste-to-Energy Systems. Ed. Thomas A. Trabold and Callie W. Babbitt. London, England: Academic Press, 2018. 69-88. Print.

Win, Shwe Sin and Thomas A. Trabold. "Chapter 6: Sustainable Waste-to-Energy Technologies: Transesterification." Sustainable Food Waste-to-Energy Systems. Ed. Thomas A. Trabold and Callie W. Babbitt. London, England: Academic Press, 2018. 89-109. Print.

Ebner, Jacqueline H., et al. "Chapter 10: Environmental Aspects of Food Waste-to-Energy Conversion." Sustainable Food Waste-to-Energy Systems. Ed. Thomas A. Trabold and Callie W. Babbitt. London, England: Academic Press, 2018. 177-201. Print.

Armington, William, Callie Babbitt, and Roger Chen. "Challenges and Innovations in Food Waste-to-Energy Management and Logistics." Sustainable Food Waste-To-energy Systems 2018. Rochester, NY: Elsevier, 2018. 259-271. Print.

Ebner, JH, et al. "Environmental Aspects of Food Waste-to-Energy Conversion." Sustainable Food Waste-To-energy Systems. Cambridge, MA: Elsevier Academic Press, 2018. 177-201. Print.

Armington, WR, RB Chen, and CW Babbitt. "Challenges and Innovations in Food Waste-to-Energy Management and Logistics." Sustainable Food Waste-To-energy Systems. Cambridge, MA: Elsevier Academic Press, 2018. 259-271. Print.

Flynn, Carli D. and Cliff I. Davidson. "Saving the Rain in Onondaga County, New York." Engineering for Sustainable Communities: Principles and Practices. Ed. Willian E. Kelly, Barbara Luke, and Richard N. Wright. Reston, VA: American Society of Civil Engineers, 2017. 367-372. Print.

Armington, William, Callie Babbitt, and Roger Chen. "Challenges and Innovations in Food Waste-to-Energy Management and Logistics." Sustainable Food Waste-to-Energy Systems. Ed. Thomas Trabold and Callie Babbitt. Amsterdam, Netherlands: Elsivier, 2018. 1-28. Print.

Ryen, EG., CW. Babbitt, and A. Lobos. "Life Cycle Thinking and Sustainable Design for Emerging Consumer Electronic Product Systems." Routledge Handbook of Sustainable Design. Abingdon, England: Routledge International Handbook, 2018. 148-169. Print.

Williams, Eric. "Future Perspectives on Electronic Scrap." E-waste Management: From Waste to Resource. Ed. Ramzy Kahhat, Klaus Hieronymi, and Eric Williams. New York, NY: Routledge, 2012. 251-260. Print.

Gaustad, Gabrielle. "Recycling." Natural Resources: Encyclopedia of Sustainability. Ed. Sarah Fredericks, Lei Shen, and Daniel Vasey. New York, NY: Berkshire, 2011. 200-210. Print.

Williams, Eric. "Ultra-Purity, Thermodynamics and Energy Use: Case Study of Semiconductor Manufacturing." Thermodynamics and the Destruction of Resource. Ed. Bhavik Bakshi, Tim Gutowski, and Dusan Sekulic. New York, NY: Cambridge University Press, 2011. 190-211. Print.

Nasr, Nabil. "Remanufacturing and the Circular Economy." A New Dynamic 2 Effective Systems In A Circular Economy. Ed. Ken Webster, et al. London, N/A: Ellen MacArthur Foundation Publishing, 2016. 107-127. Print.

Nasr, Nabil and Mitsutaka Matsumoto. "Remanufacturing as an Enabler for Green Service Models." Services and the Green Economy. Ed. Andrew Jones, et al. London, N/A: Palgrave Macmillan, 2016. 75-98. Print.

Potesta, Giovanna. "The Collective Space of Commerce between Identity and Globalization in Kuwait." International Journal of Architecture and Design 25. 2 (2014): 1116-1126. Print.

Potesta, Giovanna and Mohammad Khalid Al-Jassar. "Occidentalism, a Middle Eastern approach on a European Theme of Urban Design." Constructed Environment Journal 1. 3 (2011): 141-148. Web.

Bawden, Kimberly, Eric Williams, and Callie Babbitt. "Mapping product knowledge to life cycle inventory bounds: a case study of steel manufacturing." Journal of Cleaner Production 113. (2016): 557-564. Print.

Bawden, Kimberly and Eric Williams. "Hybrid Life Cycle Assessment of Low, Mid and High-Rise Multi-Family Dwellings." Challenges 6. (2015): 98-116. Web.

Bawden, Kimberly, Eric Williams, and Callie Babbitt. "Mapping Product Knowledge to Life Cycle Inventory Bounds: A Case Study of Steel Manufacturing." Journal of Cleaner Production 113. (2016): 557-564. Print.

Winnebeck, Kathryn H. "Today's Environmental Manager's Toolbox: Evaluating the EHS Attributes of Products." Journal of Environmental Sustainability 1. (2011): 105-120. Web.

Winnebeck, Kathryn H. "An Abbreviated Alternatives Assessment Process for Product Designers: A Children's Furniture Manufacturing Case Study." Journal of Cleaner Production 19. 5 (2011): 464-476. Print.

Fister, David. "Conversion of Plating Line Rinses to a Closed Loop Deionization System." Metal Finishing. (2012): Not applicable, web article. Web.

Babbitt, CW, et al. "Closing the loop on circular economy research: from theory to practice and back again." Resources, Conservation and Recycling 135. (2018): 1-2. Print.

Kasulaitis, BV, CW Babbitt, and AK Krock. "Dematerialization and the circular economy: Comparing strategies to reduce material impacts of the consumer electronic product ecosystem." Journal of Industrial Ecology 23. (2018): 119-132. Print.

Garvey, T, et al. "Comparing ecotoxicity risks for nanomaterial production and release under uncertainty." Clean Technologies and Environmental Policy 21. (2019): 229-242. Print.

Moore, EA, et al. "Cascading Ecological Impacts of Fullerenes in Freshwater Ecosystems." Environmental toxicology and chemistry 38. (2019): -. Print.

Leader, A, G Gaustad, and CW Babbitt. "The effect of critical material prices on the competitiveness of clean energy technologies." Materials for Renewable and Sustainable Energy 8. (2019): 8. Print.

Babbitt, CW. "The role of clean technology research in disaster debris management." Clean Technologies and Environmental Policy 21. (2019): 923-924. Print.

Cabral, S Ponte, et al. "Fullerene toxicity in the benthos with implications for freshwater ecosystem services." Science of the Total Environment 687. (2019): 451-459. Print.

Althaf, S, CW Babbitt, and R Chen. "Forecasting electronic waste flows for effective circular economy planning." Resources, Conservation and Recycling 151. (2019): 104362. Print.

Ryen, EG., et al. "Ecological Foraging Models as Inspiration for Optimized Recycling Systems in the Circular Economy." Resources, Conservation and Recycling 135. (2018): 48-57. Print.

Williams, Eric, Ashok Sekar, and Roger Chen. "Changes in Time use and their Effect on Energy Consumption in the United States." Joule 2. 3 (2018): 521-536. Print.

Das, Saptarshi, Gabrielle Gaustad, and Eric Williams. "Techno-economic Analysis of Supercritical Extraction of Rare Earth Elements from Coal Ash." Journal of Cleaner Production 189. (2018): 539-551. Print.

Sekar, Ashok, Eric Williams, and Roger Chen. "How Behavioral and Geographic Heterogeneity Affects Economic and Environmental Benefits of Efficient Appliances." Energy Policy 125. (2018): 537-547. Print.

Barber, S., et al. "Closing Nutrient Cycles with Biochar - From Filtration to Fertilizer." Journal of Cleaner Production 197. (2018): 1597-1606. Print.

Win, Shwe Sin, et al. "Anaerobic Digestion of Black Solider Fly Larvae (BSFL) Biomass as Part of an Integrated Biorefinery." Renewable Energy 127. (2018): 705-712. Print.

Liu, Xuan and Thomas A. Trabold. "Non-active Area Water Mitigation in PEM Fuel Cells via Bipolar Plate Surface Energy Modification." International Journal of Hydrogen Energy 43. (2018): 908-920. Print.

Hegde, Swati, Jeffrey S. Lodge, and Thomas A. Trabold. "Characteristics of Food Processing Wastes and their use in Sustainable Alcohol Production." Renewable and Sustainable Energy Reviews 81. (2018): 510-523. Print.

Chen, Roger, Jee-Eun Kang, and Ziheng Xu. "A Random Utility Based Estimation Framework for the Household Activity Pattern Problem." Transportation Research, Part A. (2018): 321-337. Print.

Chen, Roger and William Armington. "Household Food Waste Collection: Building Service Networks Through Neighborhood Expansion." Waste Management. (2018): 304-311. Print.

Chen, Roger and Ming Hu. "A Framework for Understanding Sense of Place in an Urban Design Context." Urban Science. (2018): 34. Web.

Chen, Roger, Eric Williams, and Ashok Sekar. "Changes in Time Use and Their Effect on Energy Consumption in the United States." Joule. (2018): 521-536. Web.

Chen, Roger and Ashok Sekar. "Investigating the Impact of Sense of Place on Site Visit Frequency with Non-motorized Travel Modes." Transport Geography. (2018): 268-282. Print.

Chen, Roger, Katie McConkey, and Glenn Gavi. "A Comparison of Motivational and Informational Contexts for Improving Eco-driving Performance." Transportation Research, Part F. (2018): 62-74. Print.

Chen, Roger, William Armington, and Ranjit Desai. "A Pattern Analysis of Daily Electric Vehicle Charging Profiles: Operational Efficiency and Environmental Impacts." Journal of Advanced Transportation. (2018): N/A. Web.

Moore, EA, et al. "Portfolio optimization of nanomaterial use in clean energy technologies." Environmental Science & Technology 52. (2018): 4440-4448. Print.

Moore, EA and CW Babbitt. "Sustainable nanomaterials by design." Nature Nanotechnology 13. (2018): 621. Print.

Babbitt, CW. "Communicating science for clean technology." Clean Technologies and Environmental Policy 20. (2018): 1735-1736. Print.

Leader, A, et al. "The consequences of electronic waste post-disaster: a case study of flooding in Bonn, Germany." Sustainability 10. (2019): 4193. Print.

Sekar, Ashok, et al. "Digital Narratives of Place: Learning about Neighborhood Sense of Place and Travel from Online Data and Reviews." Transportation Research Record. (2017): 1-10. Print.

Richa, K., C.W. Babbitt, and G. Gaustad. "Environmental Trade-offs Across Cascading Lithium-Ion Battery Life Cycles." International Journal of Life Cycle Assessment 22. 1 (2017): 68-81. Print.

Bustamante, M., G. Gaustad, and E. Alonso. "Comparative Analysis of Supply Risk Mitigation Strategies for Critical Byproduct Minerals- A Case Study of Tellurium." Environmental Science and Technology. (2017): 11-21. Web.

Gaustad, G., M. Krystofik, and M. Bustamante. "Circular Economy Strategies for Mitigating Critical Material Supply Issues." Resources,Conservation and Recycling. (2017): 1-10. Web.

Ryen, EG., et al. "Ecological Foraging Models as Inspiration for Optimized Recycling Systems in the Circular Economy." Resources,Conservation and Recycling. (2017): 1-10. Web.

Richa, K., C. Babbitt, and G. Gaustad. "Eco-efficiency Analysis of a Lithium-ion Battery Waste Hierarchy Inspired by Circular Economy." special issue on Exploring the Circular Economy, Journal of Industrial Ecology 21. 3 (2017): 715-730. Web.

Noshadravan, A., et al. "Operational Strategies for Increasing Secondary Materials in Metals Production under Uncertainty." Journal of Sustainable Metallurgy 3. (2017): 350-361. Web.

Liu, X. and T.A. Trabold. "Non-Active Area Water Mitigation in Pem Fuel Cells via Bipolar Plate Surface Energy Modification." International Journal of Hydrogen Energy 43. 2 (2017): 908-920. Web.

Hegde, S., J.S. Lodge, and T.A. Trabold. "Characteristics of Food Processing Wastes and Their Use in Sustainable Alcohol Production." Renewable and Sustainable Energy Reviews 81. (2017): 510-523. Web.

Leader, A.M., X. Wang, and G. Gaustad. "Creating the 2020 Tokyo Olympic Medals from Electronic Scrap: Sustainability Analysis." Journal of The Minerals, Metals & Materials Society 69. 3 (2017): 1539-1545. Web.

Olivetti, E.A, et al. "Lithium-Ion Battery Supply Chain Considerations: Analysis of Potential Bottlenecks in Critical Metals." Joule 1. 2 (2017): 229-243. Web.

Krystofik, Mark and Gabrielle Gaustad. "Tying Product Reuse into Tying Arrangements to Achieve Competitive Advantage and Environmental Improvement." Resources, Conservation and Recycling. (2017): 1-11. Web.

Das, Saptarshi, et al. "Analyzing Potential Markets for Autonomous Vehicles Using Time-Use Data." Challenges 8. 3 (2017): 1-15. Web.

Williams, Eric, et al. "Wind Power Costs Expected to Decrease Due to Technological Progress." Energy Policy 106. (2017): 427-435. Print.

Goteti, Srujana Naga, Eric Hittinger, and Eric Williams. "How Much Wind and Solar Are Needed to Realize Emissions Benefits from Storage?" Energy Systems. (2017): 1-23. Web.

Chen, Roger and Ashok Sekar. "Investigating the Impact of Sense of Place on Site Visit Frequency with Non-Motorized Travel Modes." Journal of Transport Geography 66. (2018): 268-282. Print.

McConky, Katie, Roger Chen, and Glenn Gavi. "A Comparison of Motivational and Informational Contexts for Improving Eco-Driving Performance." Transportation Research Part F: Traffic Psychology and Behaviour 52. (2018): 62-74. Print.

Chen, Roger. "Models of Count with Endogenous Choices." Transportation Research Part B: Methodology. (2017): 1-14. Print.

Sekar, Ashok, Eric Williams, and Roger Chen. "Changes in Time Use and Their Effect on Energy Consumption in the United States." Joule. (2018): 1-16. Web.

Das, Saptarshi, et al. "Impacts of Autonomous Vehicles on Consumers Time-Use Patterns." Challenges. (2017): 1-15. Web.

Desai, Ranjit, Roger Chen, and William Armington. "A Pattern Analysis of Daily Electric Vehicle Charging Profiles: Operational Efficiency and Environmental Impacts." Journal of Advanced Transportation 2018. (2018): 1-15. Web.

Babbitt, CW. "A "Systems" Perspective on Clean Technology." Clean Technologies and Environmental Policy. (2017): 2341-2341. Print.

Babbitt, CW. "Foundations of Sustainable Food Waste Solutions: Innovation, Evaluation, and Standardization." Clean Technologies and Environmental Policy. (2017): 1255-1256. Print.

Ebner, Jacqueline H., et al. "Anaerobic co-digestion of commercial food waste and dairy manure: characterizing biochemical parameters and synergistic effects." Waste Management 52. (2016): 286-294. Print.

Hebda, Cam, et al. "Determining economically optimal household organic material." Resources, Conservation and Recycling 108. (2016): 88-96. Print.

Waller, Michael G., Mark R. Walluk, and Thomas A. Trabold. "Performance of high temperature PEM fuel cell materials. Part 1: Effects of temperature, pressure and anode dilution." International Journal of Hydrogen Energy 41. (2016): 2944-2954. Print.

Gutierrez-Aliaga, Lourdes and Eric Williams. "Co-alignment of comfort and energy saving objectives for U.S. office buildings and restaurants." Sustainable Cities and Society 27. (2016): 32—41. Print.

Sekar, Ashok, Eric Williams, and Roger Chen. "Heterogeneity in time and energy use of watching television." Energy Policy 93. (2016): 50-58. Print.

Goe, Michele and Gabrielle Gaustad. "Estimating Direct Climate Impacts of End of Life Solar Photovoltaic Recovery." Solar Energy Materials and Solar Cells 156. (2016): 27-36. Print.

Bustamante, Michele, et al. "Life Cycle Assessment of Jointly Produced Solar Energy Materials: Challenges & Best Practices." Solar Energy Materials and Solar Cells 156. (2016): 11-26. Print.

Hebda, Cam, et al. "Modeling economically optimal household organic material management pathways." Resources, Conservation, and Recycling 108. (2016): 88-96. Print.

M.L., Bustamante,, et al. "Life cycle assessment of jointly produced solar energy materials: Challenges and best practices." Solar Energy Materials and Solar Cells 156. (2016): 11-26. Print.

X., Wang,, Gaustad, G., and Babbitt, C.W. "Targeting high value metals in lithium-ion battery recycling via shredding and size separation." Waste Management 51. (2016): 204-213. Print.

X., Wang,, Gaustad, G., and Babbitt, C.W. "Targeting high value metals in lithium-ion battery recycling via shredding and size separation." Waste Management 51. (2016): 204-213. Print.

M., Komeijani,, Ryen, E.G., and Babbitt, C.W. "Bridging the Gap between Eco-Design and the Human Thinking System." Challenges 7. 1 (2016): 1-16. Web.

K.R., Bawden,, Williams, E.D., and Babbitt, C.W. "Mapping product knowledge to life cycle inventory bounds: a case study of steel manufacturing." Journal of Cleaner Production 113. (2016): 557-564. Print.

Ryen, EG, CW Babbitt, and ED Williams. "Consumption-Weighted Life Cycle Assessment of a Consumer Electronic Product Community." Environmental Science & Technology 49. 4 (2015): 2549-2559. Print.

Kasulaitis, BV, et al. "Evolving Materials, Attributes, and Functionality in Consumer Electronics: Case Study of Laptop Computers." Resources, Conservation and Recycling 100. (2015): 1-10. Print.

Matteson, Schuyler and Eric Williams. "Learning Dependent Subsidies for Lithium-ion Electric Vehicle Batteries." Technological Forecasting and Social Change 92. (2015): 322-331. Print.

Ryen, Erinn, Callie Babbitt, and Eric Williams. "Consumption-Weighted Life Cycle Assessment of a Consumer Electronic Product Community." Environmental Science and Technology 49. (2015): 2549-2559. Print.

Kasulaitis, Barbara, et al. "Evolving Materials, Attributes, and Functionality in Consumer Electronics: Case Study of Laptop Computers." Resources, Conservation and Recycling 100. (2015): 1-10. Print.

Williams, Eric, et al. "Sun-to-Wheels Exergy Efficiencies for Bio-Ethanol and Photovoltaics." Environmental Science and Technology 49. (2015): 6394-6401. Print.

Matteson, Schuyler and Eric Williams. "Residual Learning Rates in Lead-acid Batteries: Effects on Emerging Technologies." Energy Policy 85. (2015): 71-79. Print.

Guhathakurta, Subhrajit and Eric Williams. "Impact of Urban Form on Energy Use in Central City and Suburban Neighborhoods: Lessons from the Phoenix Metropolitan Region." Energy Procedia 75. (2015): 2928-2933. Print.

Ebner, Jacqueline H., et al. "Lifecycle Greenhouse Gas Analysis of an Anaerobic Codigestion Facility Processing Dairy Manure and Industrial Food Waste." Environmental Science & Technology 49. (2015): 11199-11208. Print.

Waller, Michael G., Mark R. Walluk, and Thomas A. Trabold. "Operating Envelope of a Short Contact Time Fuel Reformer for Propane Catalytic Partial Oxidation." Journal of Power Sources 274. (2015): 149-155. Print.

Walluk, Mark R., et al. "Comparison of Reforming Performance of JP-8 and HRJ-5 for Fuel Cell Applications." Fuel 139. (2015): 35-39. Print.

Wang, Xue, Gabrielle Gaustad, and Callie Babbitt. "Targeting high value metals in lithium-ion battery recycling via shredding and size-based separation." Waste Management. (2015): NA. Print.

Richa, Kirti, et al. "Environmental trade-offs across cascading lithium-ion battery life cycles." International Journal of Life-Cycle Assessment. (2015): 1-16. Print.

Goe, Michele, Brian Tomascewski, and Gabrielle Gaustad. "Tradeoffs in Siting Solar Photovoltaic Material Recovery Infrastructure." Journal of Environmental Management 160. (2015): 154-166. Print.

Krystofik, Mark, Jeff Wagner, and Gabrielle Gaustad. "Intellectual Property Rights and Green Product Design." Resources, Conservation, and Recycling 97. (2015): 44-54. Print.

Sekar, Ashok, Eric Williams, and Roger B. Chen. "Heterogeneity in Time and Energy use of Watching Television." Energy Policy. (2016): 1-10. Print.

Mutchek, Michele and Eric Williams. "Moving Towards Sustainable and Resilient Smart Water Grids." Challenges 5. (2014): 123-137. Web.

Waller, Michael, et al. "Current and Theoretical Maximum Well-to-wheels Exergy Efficiency of Options to Power Vehicles with Natural Gas." Applied Energy 127. (2014): 55-63. Print.

Sekar, Ashok, Eric Williams, and Mikhail Chester. "Siting is a Constraint to Realize Environmental Benefits from Carbon Capture and Storage." Environmental Science and Technology 48. 19 (2014): 11705-11712. Print.

Walluk, M.R., et al. "Diesel Autothermal Reforming for Solid Oxide Fuel Cell Systems: Anode Off-gas Recycle Simulation." Applied Energy 130. (2014): 94-102. Print.

Waller, M.G., et al. "Current and Theoretical Maximum Well-to-wheels Exergy Efficiency of Options to Power Vehicles with Natural Gas." Applied Energy 127. (2014): 55-63. Print.

Owejan, J.P., T.A. Trabold, and M.M. Mench. "Oxygen Transport Resistance Correlated to Liquid Water Saturation in the Gas Diffusion Layer of PEM Fuel Cells." International Journal of Heat and Mass Transfer 71. (2014): 585-592. Print.

Lin, J., et al. "Bio-fuel Reforming for Solid Oxide Fuel Cell Applications. Part 2: Biodiesel." International Journal of Hydrogen Energy 39. (2014): 183-195. Print.

Lin, J., et al. "Bio-fuel Reforming for Solid Oxide Fuel Cell Applications. Part 3: Biodiesel-diesel Blends." International Journal of Hydrogen Energy 39. (2014): 196-208. Print.

Waller, M.G., M.R. Walluk, and T.A. Trabold. "Operating Envelop of a Short Contact Time Fuel Reformer for Propane Catalytic Partial Oxidation." Journal of Power Sources 274. (2014): 149-155. Web.

Walluk, M.R., et al. "Comparison of Reforming Performance of JP-8 and HRJ-5 for Fuel Cell Applications." Fuel 139. (2014): 35-39. Web.

Bustamante, M. and G. Gaustad. "Challenges in Assessment of Clean Energy Supply-Chains Based on Byproduct Minerals: A Case Study of Tellurium Use in Thin Film Photovoltaics." Applied Energy, special issue on Sustainable Supply chains and Energy Security 123. (2014): 397-414. Print.

Ganter, M., et al. "Cathode Refunctionalization as a Lithium-ion Battery Recycling Alternative." Journal of Power Sources 256. (2014): 274-280. Print.

Krystofik, M., C. Babbitt, and G. Gaustad. "When Consumer Behavior Dictates Life-cycle Performance Beyond the Use Phase: Case Study of Inkjet Cartridge End-of-life Management." International Journal of Life-cycle Assessment 19. 5 (2014): 1129-1145. Print.

Goe, M. and G. Gaustad. "Strengthening the Case for Recycling Photovoltaics: An Energy Payback Analysis." Applied Energy v 120. (2014): 41-48. Print.

Goe, M. and G. Gaustad. "Identifying Critical Materials for Photovoltaics in the US: A Multi-metric Approach." Applied Energy, special issue on Sustainable Supply Chains and Energy Security v 123. (2014): 387-396. Print.

Wang, X., et al. "Economic and Environmental Characterization of an Evolving Li-ion Battery Waste Stream." Journal of Environmental Management v 135. (2014): 126-134. Print.

Wang, X., et al. "Economies of Scale for Recycling Li-ion Batteries." Resources, Conservation, and Recycling v 83. (2014): 53-62. Print.

Richa, K., et al. "A Future Perspective on Lithium-ion Battery Waste Flows from Electric Vehicles." Resources, Conservation, and Recycling v 83. (2014): 63-76. Print.

Ryen, E.G., et al. "Community Ecology Perspectives on the Structural and Functional Evolution of Consumer Electronics." Journal of Industrial Ecology 8. (2014): 708-721. Print.

Richa, K., et al. "A Future Perspective on Lithium-ion Battery Waste Flows from Electric Vehicles." Resources, Conservation, and Recycling 83. (2014): 63-76. Print.

Wang, X., et al. "Economies of Scale for Future Lithium-ion Battery Recycling Infrastructure." Resources, Conservation, and Recycling 83. (2014): 53-62. Print.

Wang, X., et al. "Economic and Environmental Characterization of an Evolving Li-ion Battery Waste Stream." Journal of Environmental Management 135. (2014): 126-134. Print.

Ganter, M.J., et al. "Cathode Refunctionalization as a Lithium Ion Battery Recycling Alternative." Journal of Power Sources 256. (2014): 274-280. Print.

Krystofik, M., C.W. Babbitt, and G. Gaustad. "When Consumer Behavior Dictates Life-cycle Performance Beyond the Use Phase: Case Study of Inkjet Cartridge End-of-life Management." International Journal of Life Cycle Assessment 19. (2014): 1129-1145. Print.

Ebner, J., et al. "Life Cycle Greenhouse Gas (GHG) Impacts of a Novel Process for Converting Food Waste to Ethanol and Co-products." Applied Energy 130. 86-93 (2014): 86-93. Print.

Chen, Roger B. and Hani S. Mahmassani. "Let it Rain: Weather Effects on Activity Stress and Scheduling Behavior." Travel Behaviour and Society 2. 1 (2014): 55-64. Print.

Lin, J., et al. "Bio-Fuel Reforming for Solid Oxide Fuel Cell Applications. Part 1: Fuel Vaporization and Reactant Mixing." International Journal of Hydrogen Energy 39. (2013): 12024-12034. Print.

Lin, J., et al. "Bio-fuel Reforming for Solid Oxide Fuel Cell Applications. Part 2: Biodiesel." International Journal of Hydrogen Energy. (2013): 1-12. Web.

Lin, J., et al. "Bio-Fuel Reforming for Solid Oxide Fuel Cell Applications. Part 3: Biodiesel-Diesel Blends." International Journal of Hydrogen Energy. (2013): 1-12. Web.

Lin, J., et al. "Auto-Thermal Reforming of Biodiesel-Ethanol-Diesel Blends for Solid Oxide Fuel Cell Applications." Energy & Fuels 27. (2013): 4371-4385. Print.

Lin, J., G. Gaustad, and T.A. Trabold. "Profit and Policy Implications of Producing Biodiesel-Ethanol-Diesel Fuel Blends to Specification." Applied Energy 104. (2013): 936-944. Print.

Lin, J., C.W. Babbitt, and T.A. Trabold. "Life Cycle Assessment Integrated with Thermodynamic Analysis of Bio-Fuel Options for Solid Oxide Fuel Cells." Bioresource Technology 128. (2013): 495-504. Print.

Anctil, A., et al. "Cumulative Energy Demand for Small Molecule and Polymer Photovoltaics." Progress in Photovoltaics: Research and Applications 21. 7 (2013): 1541-1554. Web.

Lin, J., C.W. Babbitt, and T. Trabold. "Life Cycle Assessment Integrated with Thermodynamic Analysis of Bio-fuel Options for Solid Oxide Fuel Cells." Bioresource Technology 128. (2013): 495-504. Web.

Lobos, A. and C.W. Babbitt. "Integrating Emotional Attachment and Sustainability in Electronic Product Design." Challenges 4. (2013): 19-33. Web.

Williams, Eric, et al. "Linking Informal and Formal Electronics Recycling via an Interface Organization." Challenges 42. (2013): 136-153. Web.

Koomey, Jonathon, H. Scott Matthews, and Eric Williams. "Smart Everything: Will Intelligent Systems Reduce Resource Use?" Annual Reviews of Environment and Resources 38. (2013): 311-43. Print.

Herron, Seth and Eric Williams. "Modelling Cascading Diffusion of New Energy Technologies: Case Study of Residential Solid Oxide Fuel Cells in the U.S. and Internationally." Environmental Science and Technology 47. 15 (2013): 8097-8104. Print.

Lin, J., C. W. Babbitt, and T. Trabold. "Life Cycle Assessment Integrated with Thermodynamic Analysis of Bio-Fuel Options for Solid Oxide Fuel Cells." Bioresource Technology. (2012) Web.

Anctil, A., et al. "Cumulative Energy Demand for Small Molecule and Polymer Photovoltaics." Progress in Photovoltaics: Research and Applications. (2012) Web.

Schauerman, C. M, et al. "Recycling Single-Wall Carbon Nanotube Anodes from Lithium Ion Batteries." Journal of Materials Chemistry 22. (2012): 12008-12015. Print.

Zhai, Pei and Eric Williams. "Analyzing Consumer Acceptance of Photovoltaics (PV) Using Fuzzy Logic Model." Renewable Energy 41. (2012): 350-357. Print.

Frijia, Stephane, Subhrajit Guhathakurta, and Eric Williams. "Functional Unit, Technological Dynamics and Scaling Properties for the Life Cycle Energy of Residences." Environmental Science and Technology 46. 3 (2012): 1782-1788. Print.

Kahhat, Ramzy and Eric Williams. "Materials Flow Analysis of E-waste: Domestic Flows and Exports of Used Computers from the United States." Resources, Conservation and Recycling 67. (2012): 67-74. Print.

Wang, X. and G. Gaustad. "Prioritizing Material Recovery for End-of-Life Printed Circuit Boards." Waste Management 32. (2012): 1903-1913. Print.

Schauerman, C., et al. "Recycling Single-Wall Carbon Nanotubes from Lithium Ion Batteries." Journal of Materials Chemistry 22. (2012): 12008-12015. Print.

Trabold, T.A., et al. "Measurement and Analysis of Carbon Formation During Diesel Reforming for Solid Oxide Fuel Cells." International Journal of Hydrogen Energy 37. (2012): 5190-5201. Print.

Owejan, J.P., et al. "Proton Resistance Correlated to Liquid Water Content of Gas Diffusion Layers." Journal of Power Sources 209. (2012): 147-151. Print.

Lin, J., C.W. Babbitt, and T.A. Trabold. "Life Cycle Assessment Integrated with Thermodynamic Analysis of Bio-Fuel Options for Solid Oxide Fuel Cells." Bioresource Technology. (2012): 1-10. Web.

Gaustad, G., E. Olivetti, and R. Kirchain. "Improving Aluminum Recycling: A Survey of Sorting and Impurity Removal Technologies." Resources, Conservation, and Recycling 58. (2012): 79-87. Print.

Nasr, Nabil. "Sustaining the Food Chain." Industrial Engineer. December (2012): 26. Print.

Nasr, Nabil. "The Sustainable Mobility Connection." Industrial Engineer. September (2012): 24. Print.

Nasr, Nabil. "Incubators Propel Clean Energy Forward." Industrial Engineer. June (2012): 28. Print.

Nasr, Nabil. "The Future of U.S. Manufacturing." Industrial Engineer. March (2012): 26. Print.

Anctil, Annick, et al. "Material and Energy Intensity of Fullerene Production." Environmental Science & Technology 45. 6 (2011): 2353-2359. Print.

Babbitt, Callie W., Eric D. Williams, and Ramzy Kahhat. "Institutional Disposition and Management of End-of-Life Electronics." Environmental Science and Technology 45. 12 (2011): 5366-5372. Print.

Deng, Liqui, Callie W. Babbitt, and Eric D. Williams. "Economic-balance Hybrid LCA Extended with Uncertainty Analysis: Case Study of a Laptop Computer." Journal of Cleaner Production 19. 11 (2011): 1198-1206. Print.

Olivetti, Elsa, Gabrielle Gaustad, and Randolph Kirchain. "Characterizing the Source and Drivers of Benefit from Explicit Consideration of Quality Variation in Process Management for Materials Production." Environmental Science and Technology 45. 9 (2011): 4118-4126. Print.

Gaustad, Gabrielle, Elsa Olivetti, and Randolph Kirchain. "Towards Sustainable Material Usage: Evaluating the Importance of Market Motivated Agency in Modeling Material Flows." Environmental Science and Technology 45. 9 (2011): 4110-4117. Print.

Williams, Eric. "Environmental Effects of Information and Communication Technologies." Nature 479. (2011): 354-358. Print.

Williams, Eric and Liqiu Deng. "Functionality Versus "Typical Product" Measures of Energy Efficiency: Case Study of Semiconductor Manufacturing." Journal of Industrial Ecology 15. 1 (2011): 108-121. Print.

Babbitt, Callie, Eric Williams, and Ramzy Kahhat. "Institutional Disposition and Management of End-of-Life Electronics: Case Study of U.S. Universities." Environmental Science & Technology 45. (2011): 5366-5372. Print.

Deng, Liqiu, Callie Babbitt, and Eric Williams. "Economic-Balance Hybrid LCA Extended with Uncertainty Analysis: Case Study of Laptop Computer." Journal of Cleaner Production 19. 11 (2011): 1198-1206. Print.

Trabold, T. A., et al. "Measurement and Analysis of Carbon Formation During Diesel Reforming for Solid Oxide Fuel Cells." International Journal of Hydrogen Energy. (2011): 1-12. Web.

Daino, M. M., et al. "Through-plane Water Transport Visualization in PEMFC by Visible and Infrared Imaging." Electrochemical and Solid-State Letters 14. (2011): B51-B54. Print.

Nasr, Nabil. "Export Sustainable Manufacturing Ideas." Industrial Engineer. December (2011): 24. Print.

Nasr, Nabil. "Manufacturing for a Crowded Planet." Industrial Engineer. September (2011): 24. Print.

Nasr, Nabil. "Real-World Remanufacturing." Industrial Engineer. June (2011): 24. Print.

Nasr, Nabil. "Sustainability and Singapore." Industrial Engineer. March (2011): 24. Print.

Hu, S.J., et al. "Assembly System Design and Operations for Product Variety." CIRP Annals 60. 2 (2011): 715-733. Print.

Nasr, Nabil, et al. "The Effect of Remanufacturing and Direct Reuse on Resource Productivity of China’s Automotive Production." Journal of Cleaner Production 194. September (2018): 309-317. Print.

Gaustad, Gabrielle, et al. "Circular Economy Strategies for Mitigating Critical Material Supply Issues." Resources, Conservation and Recycling. (2017): 1-10. Web.

Krystofik, Mark, et al. "Adaptive Remanufacturing for Multiple Lifecycles: A Case Study in Office Furniture." Resources, Conservation and Recycling. (2017): 1-10. Web.

Krystofik, Mark and Gabrielle Gaustad. "Tying Product Reuse into Tying Arrangements to Achieve Competitive Advantage and Environmental Improvement." Resources, Conservation and Recycling. (2017): 1-11. Web.

Waller, Michael G., Mark R. Walluk, and Thomas A. Trabold. "Performance of high temperature PEM fuel cell materials. Part 1: Effects of temperature, pressure and anode dilution." International Journal of Hydrogen Energy 41. (2016): 2944-2954. Web.

Nasr, Nabil, et al. "A Holistic Decision Support Tool for Remanufacturing: End-of-life (EOL) Strategy Planning." Advances in Manufacturing 4. 3 (2016): 189-201. Print.

Nasr, Nabil, Richard Kashmanian, and Cory Kreiss. "Making the Business Case for Sustainabillity: How to Account for Intangible Benefits - A Case Study Approach." Environmental Quality Management 26. 1 (2016): 5-24. Print.

Walluk, Mark R., et al. "Comparison of Reforming Performance of JP-8 and HRJ-5 for Fuel Cell Applications." Fuel 139. (2015): 35-39. Web.

Nasr, N., et al. "Designing Automotive Products for Remanufacturing from Material Selection Perspective." Journal of Clenaer Production. (2015): 1-10. Web.

Nenadic, Nenad G., et al. "Estimation of State-of-Charge and Capacity of Used Lithium-Ion Cells." International Journal of Prognostics and Health Management 5. 2 (2014): 1-12. Web.

Duddy, Brian, et al. "Conversion of a Spark-Ignited Aircraft Engine to JP-8 Heavy Fuel for Use in Unmanned Aerial Vehicles." SAE International Journal of Engines 4. 1 (2011): 82-93. Print.

Potesta, Dr. Giovanna and Professor Jules Chiavaroli. "A New Life for American Cities: Urban Strategies and Community Engagement." Proceedings of the Scholarship of Social Engagement Symposium. Ed. Professor Joe Calistra. Lawrence, Kansas: n.p., Print.

Potesta, Giovanna. "Making Successful Urban Places: An A Posteriori Critique of the Area Ex- Fiat in Florence." Proceedings of the Future of Places, 06/28-07/01, Stockholm. Ed. Sustasis Foundation, Portland, OR. Portland, OR: Sustasis, Web.

Potesta, Giovanna. "The Traditional Urban Fabric of Florence: a Comparison between different Conservation Philosophies." Proceedings of the Conference on Architectural Conservation. Ed. Municipality of Dubai. Dubai, EAU, Arabian Emirates: Municiplaity of Dubai, 2012. Print.

Potesta, Giovanna. "The Collective Space of Commerce in Kuwait between Identity and Globalization." Proceedings of the Constructed Environment. Ed. University of Champaign, IL. Lisbon, Portugal: n.p., 2013. Web.

Potesta', Giovanna. "The Design of Commercial Spaces in the Northern Arab Peninsula." Proceedings of the ASCE Conference. Ed. ASCE. Fort Worth, Texas: ASCE, 2012. Web.

Potesta, Giovanna. "The Deconstruction of a City." Proceedings of the Sguardi sulle Citta' in Trasformazione. Ed. University of Bologna. Imola, Italy: La Mandragora, 2011. Print.

Williamson, Anahita, Brian Hilton, and Kate Winnebeck. "The Future of Toner: Life-Cycle Inventory, Impacts and Environmental Technologies." Proceedings of the NIP and Digital Fabrication 2011, Minneapolis, MN, October 2011. Ed. The Society for Imaging Science and Technology. MN: n.p., 2011. Web.

Trabold, Thomas A., et al. "Analysis of Waste-to-Energy Opportunities in the New York State Food Processing Industry." Proceedings of the ASME 2011 5th International Conference on Energy Sustainability & 9th Fuel Cell Science, Engineering and Technology Conference, August 7-10, 2011, Washington D.C. Ed. ESFuelCell2011. Washington D.C.: n.p., 2011. Web.

Nunziato, Ryan, et al. "Mechanical Properties and Anaerobic Biodegradation of Thermoplastic Starch/Polycaprolactone Blends." Proceedings of the 21st IAPRI World Conference on Packaging. Ed. Zhi-Wei Wang. Zhuhai, China, China: n.p., 2018. Print.

Hegde, Swati, et al. "Anaerobic Biodegradation of Bioplastic Packaging Materials." Proceedings of the 21st IAPRI World Conference on Packaging. Ed. Zhi-Wei Wang. Zhuhai, China, China: n.p., 2018. Print.

Samadi, Kosar, et al. "Mechanical Behavior and Anaerobic Biodegradation of a Poly(lactic acid) blend containing a Poly(lactic acid)-co-Poly(glycolic acid) Copolymer." Proceedings of the ANTEC Conference and Tradeshow. Ed. SPE. Orlando, FL: Society of Plastics Engineers, 2018. Print.

Chen, Roger and Christopher Valent. "The Socialization of Travel: The Effects of Social Networks on Resiliency." Proceedings of the Transportation Research Board. Ed. N/A. Washington, DC: n.p., Web.

Chen, Roger and William Armington. "What to Do with All This Food? Examining the Emerging Food Waste Hauling Network in Western New York State." Proceedings of the Transportation Research Board. Ed. N/A. Washington, DC: n.p., Web.

Chen, Roger, et al. "A Queueing Analysis of Operational Inefficiency in Public PEV Charging Stations." Proceedings of the Transportation Research Board. Ed. N/A. Washington, DC: n.p., Web.

Mortvedt, Teija, et al. "Understanding Scrap Recycling and the Potential of Hand-held Elemental Analyzers." Proceedings of the Advances in Environmental Technologies:Recycling and Sustainability Joint Session. Ed. John Howarter, et al. San Diego, CA: TMS Annual Meetings, 2017. Web.

Leader, Alexandra, et al. "Novel Metrics for Assessing Criticality of Byproduct Metals." Proceedings of the Pan American Materials Congress:Materials for Green Energy. Ed. Ramlinga Viswanathan Mangalaraja, et al. San Diego, CA: TMS Annual Meetings, 2017. Web.

Gaustad, Gabrielle, et al. "Scoping the Potential of Coal Ash as a Source of Rare Earth Elements." Proceedings of the Energy Materials 2017:Recycling of Waste Materials from Manufacturing Processes:Recycling and Sustainability Joint Session. Ed. Elsa Olivetti. San Diego, CA: TMS Annual Meetings, 2017. Web.

Win, S.S., et al. "Feasibility Assessment of Low-Volume Anaerobic Digestion Systems for Institutional Food Waste Producers." Proceedings of the ASME Power and Energy Conversion Conference. Ed. Advanced Energy Systems Division. New York, NY: ASME, 2017. Print.

Hegde, S., S.S. Win, and T.A. Trabold. "Stabilizing Anaerobic Digestion of Food Waste for Biomethane Production." Proceedings of the ASME Power and Energy Conversion Conference. Ed. Advanced Energy Systems Division. New York, NY: ASME, 2017. Print.

Chen, Roger, et al. "A Queueing Analysis of Operational Inefficiency in Public PEV Charging Stations." Proceedings of the Annual Meeting of the Transportation Research Board. Ed. National Academies of Engineering and Science. Rochester, NY: Transportation Research Board, 2017. Web.

Armington, William and Roger Chen. "What to Do With All This Food? Examining the Emerging Food Waste Hauling Network in Western New York State." Proceedings of the Annual Meeting of the Transportation Research Board. Ed. National Academies of Engineering and Science. Washington, DC: Transportation Research Board, 2017. Web.

Freire, Felipe, et al. "Performance Analysis of a “Green” Building Photovoltaic System." Proceedings of the 43rd IEEE Photovoltaic Specialists Conference. Ed. IEEE. Portland, OR: IEEE, Print.

Waller, Michael G., Mark R. Walluk, and Thomas A. Trabold. "Design of an integrated propane fuel reformer and fuel cell system for unmanned aerial system (UAS) applications." Proceedings of the 2016 IEEE Geoscience and Remote Sensing Society (GRSS) STRATUS Workshop: Systems and Technologies for Remote Sensing Applications through Unmanned Aerial Systems. Ed. IEEE. Rochester, NY: IEEE, Print.

Desai, Ranjit, Roger Chen, and William Armington. "A Pattern Analysis of Daily Electric Vehicle Charging Profiles: Operational Efficiency and Environmental Impacts." Proceedings of the Annual Meeting of the Transportation Research Board. Ed. National Academies of Science. Washington, DC: n.p., Print.

Xu, Zhiheng, Jee Eun Kang, and Roger Chen. "A Random Utility-Based Estimation Framework for the Household Activity Pattern Problem." Proceedings of the Annual Meeting of the Transportation Research Board. Ed. National Academies of Science. Washington, DC: n.p., Web.

Chen, Roger, Glenn Gavi, and Katie McConkey. "A Comparison of Motivational and Informational Contexts for Improving Eco-Driving Performance." Proceedings of the Annual Meeting of the Transportation Research Board. Ed. National Academies of Science. Washington, DC: n.p., Web.

Chen, Roger. "Models of Count with Endogenous Choices." Proceedings of the International Symposium on Transportation and Traffic Theory. Ed. Marco Nie, Karen Smilowitz and Hani Mahmassani. Evanston, IL: Elsivier, Print.

Goe, Michele and Gabrielle Gaustad. "Estimating direct human health impacts of end of life solar recovery and recycling." Proceedings of the Photovoltaic Specialist Conference. Ed. NA. Portland, Oregon: n.p., Print.

Bustamante, Michele and Gabrielle Gaustad. "Materials Research to Enable Clean Energy: Leverage Points for Risk Reduction in Critical Byproduct Material Supply chains." Proceedings of the Minerals, Metals, and Materials Conference. Ed. NA. Nashbille, TN: n.p., Print.

Gaustad, Gabrielle. "Sustainability: Opportunities for teaching old concepts via new problems." Proceedings of the Minerals, Materials, and Metals Conference. Ed. NA. Nashville, TN: n.p., Print.

Xhaxhollari, Vasken, Michele Bustamante, and Gabrielle Gaustad. "Mitigating supply risk of critical and strategic materials: the role of trade policies." Proceedings of the Minerals, Metals, and Materials Conference. Ed. NA. Nashville, TN: n.p., 2016. Web.

Chen, Roger B. and Hani S. Mahmassani. "A Queueing Framework and Analysis of Observed One-day Travel and Activity Patterns." Proceedings of the Annual Meeting of the Transportation Research Board. Ed. National Academy of Sciences (NAS). Washington, DC: n.p., 2015. Web.

Barber, Steven T., Josh M. Dranoff, and Thomas A. Trabold. "Initial Assessment of Microbial Fuel Cells for Treatment of Tofu Processing Waste." Proceedings of the International Power and Energy Conference, June 28 - July 2, 2015, San Diego, CA. Ed. Yunho Hwang. New York, NY: ASME, Print.

Ebner, Jacqueline H., Anahita A. Williamson, and Thomas A. Trabold. "Quantifying the Greenhouse Gas Impacts of Pathways for Treatment of Secondary Resources Generated in the Food Supply Chain." Proceedings of the International Power and Energy Conference, June 28 - July 2, 2015, San Diego, CA. Ed. Yunho Hwang. New York, NY: ASME, Print.

Hegde, Swati, et al. "Feasibility Assessment of Medium-Scale Anaerobic Digesters for Treatment of Brewery and Dairy Farm Waste Streams." Proceedings of the International Power and Energy Conference, June 28 - July 2, 2015, San Diego, CA. Ed. Yunho Hwang. New York, NY: ASME, Print.

Waller, Michael G., Mark R. Walluk, and Thomas A. Trabold. "Performance of a High-Temperature Proton Exchange Membrane Fuel Cell (HT-PEMFC) Operating on Simulated Reformate." Proceedings of the International Power and Energy Conference, June 28 - July 2, 2015, San Diego, CA. Ed. Antonio B. Silvera. New York, NY: ASME, Print.

Win, Shwe Sin, Swati Hegde, and Thomas A. Trabold. "Techno-Economic Assessment of Different Pathways for Utilizing Glycerol Derived from Waste Cooking Oil-Based Biodiesel." Proceedings of the International Power and Energy Conference, June 28 - July 2, 2015, San Diego, CA. Ed. Yunho Hwang. New York, NY: ASME, Print.

Wang, Xue, W Hoffman, and Gabrielle Gaustad. "Challenges in Validation of Sustainable Products and Services in the Green Marketplace." Proceedings of the ISSST 2015. Ed. Thomas Seager. Dearborn, Michigan: n.p., Web.

Bustamante, Michele and Gabrielle Gaustad. "Price Volatility in PV-Critical Material Markets: Perspectives for Solar Firms, Consumers, and Policy Makers." Proceedings of the Proceedings of the 42nd IEEE Photovoltaic Specialists Conference (PVSC). Ed. Tim Anderson. New Orleans, LA: n.p., Print.

Chen, Roger B. and William Armington. "Household Activity and Travel Patterns with Autonomous Vehicles: In-vehicle Activity Decisions." Proceedings of the 95th Annual Meeting of the Transportation Research Board. Ed. National Academies. Washington, DC: National Academies: Transportation Research Board, Web.

Waller, M.G., M.R. Walluk, and T.A. Trabold. "Towards the Development of a Fuel Cell System for Residential Applications: Propane Reforming Via Catalytic Partial Oxidation." Proceedings of the ASME 8th International Conference on Energy Sustainability & 12th International Fuel Cell Science, Engineering and Technology Conference. Ed. J. Brouwer et al. New York, NY: ASME, 2014. Print.

Ebner, J., et al. "Estimating the Biogas Potential from Colleges and Universities." Proceedings of the ASME 8th International Conference on Energy Sustainability & 12th International Fuel Cell Science, Engineering and Technology Conference. Ed. J. Brouwer et al. New York, NY: ASME, 2014. Print.

Fenton, D.J., J.J. Gagliardo, and T.A. Trabold. "Analysis of Water Morphology in the Active Area and Channel-to-manifold Transitions of a PEM Fuel Cell." Proceedings of the ASME 8th International Conference on Energy Sustainability & 12th International Fuel Cell Science, Engineering and Technology Conference. Ed. J. Brouwer et al. New York, NY: ASME, 2014. Print.

Bustamante, Michele and Gabrielle Gaustad. "The Evolving Copper-Tellurium Byproduct System: A Review of Extraction and Processing Technologies." Proceedings of the Rare Metal Extraction and Processing Symposium Proceedings, TMS Annual Meeting and Exhibition. Ed. Neale Neelameggham, et al. San Diego, CA: n.p., 2014. Print.

Chan, W.H., et al. "Food Waste Resources for Sustainable Energy Production in the Finger Lakes Region of New York State." Proceedings of the ASME 7th International Conference on Energy Sustainability, Minneapolis, MN, July 14-19, 2013. Ed. M.W. Ellis. New York, NY: ASME, Web.

Rankin, M.J., T.A. Trabold, and R. Blythe. "Environmental Impact Assessment of an Anaerobic Codigestion System in Western New York State." Proceedings of the ASME 7th International Conference on Energy Sustainability, Minneapolis, MN, July 14-19, 2013. Ed. M.W. Ellis. New York, NY: ASME, Web.

Waller, M.G. and T.A. Trabold. "Review of Microbial Fuel Cells for Wastewater Treatment: Large-Scale Applications, Future Needs and Current Research Gaps." Proceedings of the ASME 11th International Fuel Cell Science, Engineering and Technology Conference, Minneapolis, MN, July 14-19, 2013. Ed. M.W. Ellis. New York, NY: ASME, Web.

Liu, X., et al. "Neutron Imaging of Water Accumulation in the Active Area and Channel-to-Manifold Transitions of a PEMFC." Proceedings of the ASME 11th International Fuel Cell Science, Engineering and Technology Conference, Minneapolis, MN, July 14-19, 2013. Ed. M.W. Ellis. New York, NY: ASME, Web.

Fumagalli, M. E, et al. "A Framework for the Integration of System Engineering and Functional Analysis Techniques to the Goal and Scope of Life Cycle Assessment." Proceedings of the ASME 2012 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference. Chicago, IL: n.p., Print.

Gaustad, G, et al. "Economic and Environmental Trade-Offs for Li-Based Battery Recycling." Proceedings of the Battery Recycling Symposium, Energy Conversion and Storage Proceedings, The Minerals, Metals, and Materials. Orlando, FL: n.p., Print.

Williams, Eric, Ramzy Kahhat, and Shijnji Kaneko. "Bounding Scenario Analysis: A Case Study of Future Energy Demand of China's Steel Sector." Proceedings of the 2012 IEEE International Symposium on Sustainable Systems and Technology. Ed. Thomas Seager. Piscataway, NJ: IEEE, 2012. Print.

Ganter, M., et al. "Electrochemical Performance and Safety of Lithium Ion Battery Anodes Incorporating Single Wall Carbon Nanotubes." Proceedings of the Material Research Society. Boston, MA: n.p., 2012. Print.

Williams, Eric, et al. "Bill of Attributes, Life Cycle Assessment and Materials Flows: Case Study of Laptop Computers." Proceedings of the Electronics Goes Green+ 2012. Ed. Nils Nillsen. Berlin, Germany: n.p., 2012. Web.

Lin, J., et al. "Auto-Thermal Reforming of Biodiesel-Ethanol-Diesel Blends for Solid Oxide Fuel Cell Applications." Proceedings of the American Institute of Chemical Engineers (AIChE) Annual Meeting, Symposium on Fuel Processing for Hydrogen Production. Ed. D. Shekhawat. Pittsburgh, PA: Americal Institute of Chemical Engineers, 2012. Print.

Liu, X., et al. "Investigation of Channel-to-Manifold Water Transport in Proton Exchange Membrane Fuel Cells." Proceedings of the ASME 6th International Conference on Energy Sustainability & 10th International Fuel Cell Science, Engineering and Technology Conference. Ed. L. Schaefer. San Diego, CA: n.p., 2012. Print.

Rankin, M.J., et al. "Analysis of Dairy Manure and Food Manufacturing Waste as Feedstocks for Sustainable Energy Production via Anaerobic Digestion." Proceedings of the ASME 6th International Conference on Energy Sustainability & 10th International Fuel Cell Science, Engineering and Technology Conference. Ed. L. Schaefer. San Diego, CA: American Society of Mechanical Engineering, 2012. Print.

Lin, J., et al. "Mitigation of Carbon Formation During Autothermal Reforming of Biodiesel for Solid Oxide Fuel Cell Applications." Proceedings of the ASME 6th International Conference on Energy Sustainability & 10th International Fuel Cell Science, Engineering and Technology Conference. Ed. L. Schaefer. San Diego, CA: American Society of Mechanical Engineering, 2012. Print.

Gaustad, Gabrielle, et al. "Economic and Environmental Trade-Offs for Li-Based Battery Recycling." Proceedings of the Minerals, Metals, and Materials Society (TMS) Annual Conference. Ed. Maria Salazar-Villalpando, et al. New York, NY: John Wiley and Sons, Print.

Vannicola, Catherine M., et al. "Mitigation of Reverberation on Speaker Identification via Homomorphic Filtering of the Linear Predictive Residual." Proceedings of the IEEE International Conference on Acoustics, Speech, and Signal Processing 2011. Ed. unknown. Prague, Czech Republic: n.p., 2011. Print.

Lawson, Aaron, et al. "Survey and Evaluation of Acoustic Features for Speaker Recognition." Proceedings of the IEEE International Conference on Acoustics, Speech, and Signal Processing 2011. Ed. unknown. Prague, Czech Republic: n.p., 2011. Print.

Lin, Jay, et al. "Assessment of Bio-fuel Options for Solid Oxide Fuel Cell-based Auxiliary Power Units." Proceedings of the 2011 IEEE International Symposium on Sustainable Systems and Technology (ISSST). Ed. unknown. Chicago, IL: IEEE, Print.

Trabold, T. A., et al. "Analysis of Waste-to-Energy Opportunities in the New York State Food Processing Industry." Proceedings of the ASME 5th International Conference on Energy Sustainability. Ed. P. Singh. Washington, D.C.: ASME, 2011. Print.

Walluk, M. R., et al. "Development of Accelerated Durability Protocols for Solid Oxide Fuel Cell Systems." Proceedings of the 2011 NDIA Ground Vehicle Systems Engineering and Technology Symposium. Ed. GVSETS. Dearborn, MI: n.p., 2011. Print.

Lin, J., et al. "Assessment of Bio-fuel Options for Solid Oxide Fuel Cell-based Auxiliary Power Units." Proceedings of the 2011 IEEE International Symposium on Sustainable Systems and Technology (ISSST). Ed. M. Eckelman. Chicago: IEEE, 2011. Print.

Nasr, Nabil, Brian Hilton, and Robert German. "A Framework for Sustainable Production and a Strategic Approach to a Key Enabler: Remanufacturing." Proceedings of the 8th Global Conference on Sustainable Manufacturing: Advances in Sustainable Manufacturing, November 22-24, 2010, Abu Dhabi. Ed. Gunther Seliger, Marwan M. K. Khraisheh, and I. S. Jawahir. Berlin, Germany: Springer, 2011. Print.

Nenadic, Nenad G., Michael G. Thurston, and Adrian A. Hood. "Learning Operating Conditions for Gearbox Health Monitoring." Proceedings of the American Helicopter Society, 74th Annual Forum and Technical Display. Ed. Vertical Flight Society. Phoenix, AZ: https://vtol.org/store/department/hums-1374.cfm, 2018. Web.

Nenadic, Nenad G., et al. "Assessment of Overhaul Effectiveness and Usage-based Inference Using Bayesian Networks." Proceedings of the 10th Annual Conference of thePrognostics and Health Management Society. Ed. Marcos Eduardo Orchard. Philadelphia, PA: PHM Society, 2018. Web.

Nenadic, Nenad G., et al. "Assessment of Overhaul Effectiveness and Usage-based Inference Using Bayesian Networks." Proceedings of the 10th Annual Conference of thePrognostics and Health Management Society. Ed. Marcos Eduardo Orchard. Philadelphia, PA: PHM Society, 2018. Web.

Nenadic, Nenad G., et al. "Processing and Interpretation of Crack-Propagation Sensors." Proceedings of the Annual Conference of the Prognostics and Health Management Society 2015. Ed. Matthew Daigle. San Diego, CA: https://www.phmsociety.org/sites/phmsociety.org/files/phm_submission/20…, 2015. Web.

Bussey, Howard E., et al. "Case study: Models for Detecting Low Oil Pressure Anomalies on Commercial Vehicles." Proceedings of the Annual Conference of the PHM Society 2014. Ed. Sankararaman Shankar. Fort Worth, TX: PHM Society, 2014. Web.

Nenadic, Nenad G., et al. "Comparative Study of Vibration Condition Indicators for Detecting Cracks in Spur Gears." Proceedings of the American Helicopter Society 69th Annual Forum and Technology Display. Ed. Mark Davis. Alexandria, VA: n.p., Print.

Ardis, Paul A., et al. "Forecasting Reactant Ignition in Solid Oxide Fuel Cell Systems." Proceedings of the ASME 10th International Fuel Cell Science, Engineering & Technology Conference. Ed. ASME. San Diego, CA: n.p., Print.

Walluk, Mark, et al. "Development of Accelerated Durability Protocols for Solid Oxide Fuel Cell Systems." Proceedings of the NDIA Ground Vehicle Systems Engineering and Technology Symposium. Ed. Leslie Ann Smith. Detroit, MI: n.p., 2011. Print.

Nenadic, Nenad G., et al. "Seeding Cracks Using a Fatigue Tester for Accelerated Gear Tooth Breaking." Proceedings of the IMAC XXIX A Conference and Exposition on Structural Dynamics. Ed. Tom Proulx. New York, NY: Springer, 2011. Web.

Thurston, Michael G., Michael Haselkorn, and Nabil Nasr. "Integrating Life-Cycle Planning Considerations into Design through the Innovation Based Design Process." Proceedings of the 2011 NDIA Ground Vehicle Systems Engineering and Technology Symposium. Ed. NDIA. Detroit, MI: n.p., 2011. Print.

Barber, Steven, et al. "Novel Pigment Replacement for Commercial Printing Inks." U.S. Provisional Patent Application 62/656,676. 12 Apr. 2018.

Waller, M., T. Trabold, and M. Bradley. "Apparatus, System and Method for Fuel Cell." U.S. Provisional Patent Application US20170110749. 20 Apr. 2017.

Waller, Michael, et al. "Apparatus, System and Method for Compact Mobile Fuel Cell System." U.S. Provisional Patent Application 15/191,781. 24 Jun. 2016.

Owejan, J.P., et al. "PEM Fuel Cell Stack Inlet Water Regulation System." Patent 8,877,392. 4 Nov. 2014.

Owejan, J.P., et al. "PEM Fuel Cell Stack Inlet Water Regulation System." Patent 8,859,163. 14 Oct. 2014.

Dadheech, G.V., et al. "Graphene Coated SS Bipolar Plate." Patent 8,758,957. 24 Jun. 2014.

Schlag, H., et al. "Fuel Cell Component with Coating Including Nanoparticles." Patent 8,735,022. 27 May 2014.

Owejan, J.P., et al. "Fuel Cell Bipolar Plate Exit for Improved Flow Distribution and Freeze Capability." Patent 8,501,364. 6 Aug. 2013.

Dadheech, G.V., et al. "Amorphous Carbon Coatings for Fuel Cell Bipolar Plates." Patent 8,497,050. 30 Jul. 2013.

Elhamid, M.H. Abd, et al. "Metallic Bipolar Plates with High Electrochemical Stability and Improved Water Management." Patent 8,470,488. 25 Jun. 2013.

Owejan, J.P., et al. "Fuel Cell Bipolar Plate Exit for Improved Flow Distribution and Freeze Capability." Patent 8,394,547. 12 Mar. 2013.

Vyas, G., et al. "Super-Hydrophilic Nanoporous Electrically Conductive Coatings for PEM Fuel Cells." Patent 8,389,174. 5 Mar. 2013.

Owejan, J.P., T.A. Trabold, and T.W. Tighe. "Low-Cost Hydrophilic Treatment Method for Assembled PEMFC Stacks." Patent 8,389,047. 5 Mar. 2013.

Vyas, G., et al. "Fuel Cell Contact Element Including a TiO2 Layer and a Conductive Layer." Patent 8,377,607. 19 Feb. 2013.

Dadheech, G.V., et al. "Amorphous Carbon Coatings for Fuel Cell Bipolar Plates." US Provisional Patent Application US20130302531. 14 Nov. 2013.

Owejan, J.P., et al. "Fuel Cell Bipolar Plate Exit for Improved Flow Distribution and Freeze Capability." US Provisional Patent Application US20130122389. 16 May 2013.

Dadheech, G.V., et al. "Fuel Cell Flow Field Plate Including Non-Stoichiometric Metal Oxide Layer." US Provisional Patent Application US20130095251. 18 Apr. 2013.

Nasr, Nabil Z. "Lessons About Water." Industrial Engineer. (2013). Print.

Nasr, Nabil Z. "The Circular Economy is Going Global." Industrial Engineer. (2013). Print.

Nasr, Nabil Z. "The Energy Mix." Industrial Engineer. (2013). Print.

Nasr, Nabil Z. "Sustainability Education Comes of Age." Industrial Engineer. (2013). Print.

Andoh, Nana-Yaw. "Sustainable Urban Mobility in Developing Countries: A Case Study in Accra, Ghana - Central Business District." United Nations Institute for Training and Research. (2016). Web.

Potestí , Giovanna. "I Viaggi del Signor N Architetto." Firenze Architettura. (2004). Print.

Potesta, Giovanna. "Giuseppe Poggi e la nascita della Cittí  Borghese." Il Nuovo Corriere di Firenze. (2011). Print.

Williams, Eric, Eric Hittinger, and Ashok Sekar. "Not all Consumers are Equal – In Terms of What they Save by Using Efficient Appliances." TheConversation. (2018). Web.

Das, Saptarshi, Eric Williams, and Gabrielle Gaustad. "Could Coal Ash be a Viable Source of Rare-earth Metals?" TheConversation. (2018). Web.

Hittinger, Eric and Eric Williams. "How Energy Storage is Starting to Rewire the Electricity Industry." TheConversation. (2018). Web.

Goteti, Srujana, Eric Hittinger, and Eric Williams. "Does Energy Storage Make the Electric Grid Cleaner?" TheConversation. (2018). Web.

Sekar, Ashok and Eric Williams. "Americans are Saving Energy by Staying at Home." TheConversation. (2018). Web.

Williams, Eric. "Autonomous Vehicles Could Help Millions of People Catch up on Sleep, TV and Work." TheConversation. (2018). Web.

Williams, Eric and Eric Hittinger. "If We Keep Subsidizing Wind, Will the Cost of Wind Energy Go Down?" TheConversation. (2017). Web.

Williams, Eric. "How to Tackle the Challenges Posed by E-waste?" Al-Jazeera Online. (2017). Web.

Williams, Eric. "Overcooling and overheating buildings emits as much carbon as four million cars." TheConversation. (2016). Web.

Williams, Eric. "TV-watching couch potatoes have outsized energy footprint." TheConversation. (2016). Web.

Nasr, Nabil Z. "Energy Innovation Will Drive Production." Industrial Engineer. (2014). Print.

Nasr, Nabil Z. "Industrial Development vs. Sustainability." Industrial Engineer. (2014). Print.

Nasr, Nabil Z. "The Why of 'Decoupling'." Industrial Engineer. (2014). Print.

Nasr, Nabil Z. "Designing Construction for Sustainability." Industrial Engineer. (2014). Print.

Nasr, Nabil. "Manufacturing Needs More than Tax Reform." ISE Magazine. (2018). Print.

Nasr, Nabil. "Manufacturing a Sustainable Material Strategy." ISE Magazine. (2018). Print.

Nasr, Nabil. "The Tools for a Circular Economy are Almost Here." ISE Magazine. (2018). Print.

Nasr, Nabil, et al. "Re-defining Value – The Manufacturing Revolution. Remanufacturing, Refurbishment, Repair and Direct Reuse in the Circular Economy." A Report of the International Resource Panel. United Nations Environment Programme. (2018). Print.

Nasr, Nabil. "Path to Circular Economy Needs Full Buy-in." ISE Magazine. (2018). Print.

Nasr, N. "Redefining Manufacturing for a Modern Economy." ISE Magazine. (2017). Print.

Nasr, N. "Disruptive Innovation Can Revive Manufacturing." ISE Magazine. (2017). Print.

Nasr, N. "How the Circular Economy Can Become a Reality." ISE Magazine. (2017). Print.

Nasr, N. "Clean Tech Helps Drive Denmark's Economy." ISE Magazine. (2017). Print.

Nasr, Nabil. "UN Sets Sights on Sustainable Industry and Energy." ISE Magazine. (2016). Print.

Nasr, Nabil. "Taking IoT on the Road." ISE Magazine. (2016). Print.

Nasr, Nabil. "Resource Efficiency and the Circular Economy." ISE Magazine. (2016). Print.

Nasr, Nabil. "NNMI and the Changing Research Landscape." ISE Magazine. (2016). Print.

Nasr, Nabil, et al. "Resource Efficiency: Potential and Economic Implications." Resource Efficiency: Potential and Economic Implications. (2016). Print.

Nasr, N. "Learning Lessons from a Sustainable Building." Industrial Engineer, March. (2015). Print.

Nasr, N. "Servitization Offers a New Path." Industrial Engineer, June. (2015). Print.

Nasr, N. "Vietnam in Transition." Industrial Engineer, September. (2015). Print.

Nasr, N. "DMDII Tackles Digital Industrial Innovation." Industrial Engineer, December. (2015). Print.

Altaf, Shahana, Callie Babbitt, and Roger Chen. "The “Evolving Ton” of Electronic Waste: Challenges And Opportunities For Recycling Infrastructure In The United States." Proceedings of the ISSST. Ed. ISSST. Chicago, IL: ISSST.

Armington, William, Callie Babbitt, and Roger Chen. "Characterizing and Modeling Emerging Regional Food Waste-to-Energy Systems." Proceedings of the ISSST. Ed. ISSST. Chicago, IL: ISSST.

Andrejko, Dennis A., ed. AURUM - Journal of Engineering Systems and Architecture (A-JESA). Istanbul: Kemerburgaz University, 2017. Print.

Andrejko, Dennis A., ed. MEGARON. Istanbul: Yildiz Technical University, 2016. Web.

Reilly, Andrew, ed. Critical Studies in Men's Fashion. London, England: Intellect, Ltd., 2012. Print.

Babbitt, CW, ed. Clean Technologies and Environmental Policy. Heidelberg: Springer, 2019. Print.

Trabold, Thomas A., ed. Sustainability - Agriculture, Food and Wildlife Section. Basel, Switzerland: MDPI, 2018. Print.

Babbitt, Callie, ed. Resources, Conservation and Recycling. Special Issue on Circular Economy: Elsevier, 2017. Print.

Trabold, Thomas A., ed. Sustainability: Section Board for "Sustainable Agriculture, Food and Wildlife". Basel, Switzerland: MDPI AG, 2016. Web.

Williams, Eric, ed. Journal of Industrial Ecology. New Haven, CT: Wiley, 1997. Print.

Babbitt, Callie, ed. Clean Technologies and Environmental Policy. Associate Editor: Springer, 2016. Print.

Trabold, Thomas, ed. Sustainability:Section Board for "Sustainable Agriculture, Food and Wildlife". Switzerland: MDPI AG, 2016. Web.

Realff, Matthew, Jan Lerou, and Michael Rinker, ed. Journal of Advanced Manufacturing and Processing. Atlanta: American Institute of Chemical Engineers, 2018. Web.

Chiavaroli, Jules. Professor. 13 Dec. 2017. City Hall, Rochester. Exhibit.

Andoh, Nana-Yaw. Sustainable Urban Mobility in Developing Countries. 12 Oct. 2016. Community Design Center of Rochester, Rochester. Exhibit.

Weber, Bruce. "Bruce Weber, Secret Love". By Adolfo Natalini and Giovanna Potesta'. Sep. 2006. Palazzo Spini Feroni Ferragamo, Florence. Exhibit.

John, Elton. "Elton John: Metamorphosis". By Adolfo Natalini and Giovanna Potesta'. Sep. 2006. Uffizi Gallery, Florence, Italy. Exhibit.

Varous, . Progetti Area ex FIAT Novoli. By Camillo Bodini and Giovanna Potesta'. Apr. 2003. Urban Center, Foundling Hospital, Piazza SS Annunziata, Florence, Italy. Exhibit.

Chiavaroli, Jules. "Data Inspired Design: New Tools and Standards for Sustainable Buildings." NYSCMA Annual Convention. NY State Concrete Masonry Association (NYSCMA). Rochester, NY. 9 Nov. 2017. Conference Presentation.

Potesta, Giovanna. "The Making of Sustainable Cities." Summit on Science and Technology - Enablement for the Sustainable Development Goals. New York Academy of Science. New York City, NY. 29 Nov. 2016. Conference Presentation.

Potesta, Giovanna and Jules Chiavaroli. "A New Life for American Cities. Urban Strategies and Community Engagement." Scholarship of Engagement Symposium. University of Kansas. Lawrence, KA. 20-21 Oct. 2016. Conference Presentation.

Potesta, Giovanna. "Looking for a New Downtown in American Cities:." Cross-Disciplinary Conference on Urban Space. Universita di Firenze. Florence, Italy. 27-28 Jun. 2016. Conference Presentation.

Potesta, Giovanna. "The Making of a New Neighborhood in Florence, Italy." Congress for the New Urbanism - New York Chapter. Community Design Center Rochester - AIA Rochester. Rochester, NY. 21-22 Apr. 2016. Lecture.

Andoh, Nana-Yaw. "New Urbanism: A Model for Sustainable Urban Design and Social Equity." MU-RIT Exchange Program. Malmo University, Sweden. Malmo, SW. 9 Sep. 2016. Guest Lecture.

Andoh, Nana-Yaw. "Historic and Architectural Significance of the Renaissance in Florence and Rome." SUNY Delhi Study Abroad Program. SUNY Delhi. Florence, Rome, IT. 5 Jan. 2016. Guest Lecture.

Hu, Ming. "Morphogenesis Design Process - Digital-Biomorphic Design." 2014 5th International Conference on the constructed Environment and construction. University of Pennsylvania. Philadelphia, PA. 16-17 Oct. 2014. Conference Presentation.

Hu, Ming. "Performance Based DesignStrategy and Parametric." 102nd ACSA Annual Meeting. Florida International University. Miami, FL. 10-12 Apr. 2014. Conference Presentation.

Hu, Ming. "Build Sustainable Community Design forFuture." The Inaugural Asian Conference on the Arts, Humanities and Sustainability. The PRESDA Foundation of Japan. Hiroshima, Japan. 1-3 Dec. 2014. Conference Presentation.

Chiavaroli, Jules. "Trends in Architecture and Architectural Education." NY State Concrete Masonry Association Spring Conference. NY State Concrete Masonry Association. Syracuse, NY. 25 Apr. 2014. Conference Presentation.

Chiavaroli, Jules and Mark Krystofik. "Built Environment vs. Sustainability Science." NY Statewide Preservation Conference. Landmark Society of Western New York. Rochester, NY. 25 Apr. 2014. Conference Presentation.

Chiavaroli, Jules and Mary Scipioni. "Resiliency Theory: A Conceptual Framework for Urban Design." American Institute of Architects New York State Design Conference. AIA New York State. Saratoga Springs, NY. 9 Oct. 2014. Conference Presentation.

Williamson, Anahita. "Tonawanda Regional Pollution Prevention Partnership: Opportunities to Advance Regional Cluster Competitiveness Through Green Chemistry and Engineering." Unleashing Green Chemistry and Engineering in the Service of a Sustainable Future. EPA. National Museum of the American Indian, New York, NY. 23 Sep. 2011. Conference Presentation.

Williamson, Anahita. "Evolving Role of EHS Manager in Industrial Sustainability Programs." Environmental Management Leadership Symposia History. CAST. RIT, Rochester, NY. 2-3 May 2011. Conference Presentation.

Williamson, Anahita. "Tools for Businesses." Healthy Economy & Environment (HE2). Clean & Healthy New York. Legislative Office Building, Albany, NY. 6-7 Dec. 2011. Conference Presentation.

Trabold, Thomas and Nenad Nenadic. "Energy Research at the Golisano Institute for Sustainability." Northeast Regional R&D Connector Workshop. Northeast Energy Efficiency Partnerships. Albany, New York. 1 Mar. 2018. Conference Presentation.

Trabold, Thomas, et al. "Thermochemical Conversion as a Sustainable Food Waste Management Strategy." Sustainable Packaging Symposium. American Institute of Chemical Engineers. Rutgers University, New Brunswick, NJ. 6 Dec. 2018. Keynote Speech.

Hegde, Swati, et al. "Anaerobic Digestion of Bioplastic Packaging Materials." Sustainable Packaging Symposium. American Institute of Chemical Engineers. Rutgers University, New Brunswick, NJ. 7 Dec. 2018. Conference Presentation.

Trabold, Thomas. "Biochar as a Sustainable Food Waste Management Strategy." Biochar 2018. US Biochar Initiative (USBI). Wilmington, Deleware. 22 Aug. 2018. Conference Presentation.

Babbitt, CW. "International Reviewer." Make Our Planet Great Again Selection Committee. Agence Nationale de la Recherche. Paris, France. 18 Dec. 2018. Address.

Babbitt, Callie. "Sustainable Materials Management for Consumer Technology." CES 2017. Consumer Technology Association. Las Vegas, NV. 7 Jan. 2017. Keynote Speech.

Trabold, Thomas. "'Neutrons don't lie!': The Transformational Role of Neutron Imaging in Fuel Cell Science and Technology." NIST Center for Neutron Research (NCNR) 50th Anniversary Symposium. NIST Center for Neutron Research. Gaithersburg, MD. 8 Dec. 2017. Conference Presentation.

Gaustad, Gabrielle. "Sustainable Selection of Materials." Materials Research Society Conference. Materials Research Society. Boston, MA. 26 Nov. 2017. Guest Lecture.

Gaustad, Gabrielle. "Secondary and Byproduct Sources of Rare Earth Metals." Materials Research Society Conference. Materials Research Society. Boston, MA. 26 Nov. 2017. Lecture.

Gaustad, Gabrielle. "Lifecycles of Lithium Ion Batteries." National Academy of Engineering Frontiers of Engineering Conference. Chinese Academy of Engineering. Shanghai, China. 22 Jun. 2017. Conference Presentation.

Trabold, Thomas. "Sustainable Energy and Mobility Systems." Guest Lecture. Nazareth College. Rochester, New York. 26 Jan. 2017. Guest Lecture.

Trabold, T.A. "Pathways to Sustainability of Energy & Mobility Systems." Science & Sustainability. University of Rochester. Rochester, NY. 1 Mar. 2017. Guest Lecture.

Trabold, T.A. "Innovations in Next-generation Energy and Mobility Systems." NYS Master Teacher Program. SUNY Geneseo. Geneseo, NY. 1 Apr. 2017. Guest Lecture.

Trabold, T.A. "Sustainable Food Waste Utilization Pathways." 6th International Energy & Sustainability Conference. Farmingdale State College. East Farmingdale, NY. 20 Oct. 2017. Keynote Speech.

Trabold, T.A. "Food Waste as a Resource for Sustainable Energy Production." Science & Sustainability. University of Rochester. Rochester, NY. 15 Nov. 2017. Guest Lecture.

Williams, Eric. "Consumer Electronics and Energy Demand." IEA Digitalization and Energy Demand Workshop. International Energy Agency. Paris, France. 17 Apr. 2017. Keynote Speech.

Williams, Eric. "A Subjective Perspective on LCA of Emerging Technologies." LCA of Emerging Technologies Workshop. University of Calgary. Calgary, Canada. 20 Jul. 2017. Lecture.

Williams, Eric. "Cross Border Reuse and Recycling of Electronics." 2nd Workshop of the Remanufacturing Working Group. Life Cycle Engineering Expert Committee. Tokyo, Japan. 28 Jul. 2017. Keynote Speech.

Williams, Eric. "Informing Solar Subsidy Policies with an International Model to Predict Residential Adoption." Seminar series. Tokyo Institute of Technology. Tokyo, Japan. 2 Aug. 2017. Lecture.

Williams, Eric. "Progress and Diffusion of New Energy Technologies." Science and Technology Seminars. University of Rochester. Rochester, NY. 22 Sep. 2017. Lecture.

Williams, Eric. "Behavior and Energy Use." PUCP Seminar. Pontifical Catholic University of Peru. Lima, Peru. 22 Nov. 2017. Lecture.

Babbitt, CW. "Sustainable Food Waste Management." U.S. Delegate to the G7 Environmental Ministers Meeting. University of Bologna. Bologna, Italy. 9 Jun. 2017. Address.

Babbitt, CW. "International Reviewer." Make Our Planet Great Again Selection Committee. Agence Nationale de la Recherche. Paris, France. 23 Nov. 2017. Address.

Trabold, Thomas A. "Sustainability workshop overview for NSF-PIRE: Materials for Renewable Energy NaturE’s Way (RENEW)." NSF/PIRE Project Annual Meeting. Case Western Reserve University. Cleveland, OH. 5 Aug. 2016. Guest Lecture.

Trabold, Thomas A. "Challenges & Opportunities in Sustainable Food Production." NSF FEWS Nexus Workshop: Transformative food technologies to enhance sustainability at the food-energy-water nexus. University of Nebraska. Lincoln, NE. 17 Feb. 2016. Guest Lecture.

Trabold, Thomas A. "What's up with sustainable cars?" meRIT Alumni Webinar Series. RIT. Rochester, NY. 12 Oct. 2016. Guest Lecture.

Williams, Eric. "Assessing Challenges and Policy Perspectives for International Electronic Waste." The 11th International Conference on Waste Management and Technology. Basel Convention Regional Centre for Asia and the Pacific. Beijing, China. 22 Oct. 2016. Keynote Speech.

Williams, Eric. "Characterizing and Managing Energy Consumption Using Time-use." Praxair Seminar Series. University of Buffalo. Buffalo, NY. 22 Sep. 2016. Lecture.

Williams, Eric. "Technology Diffusion — Purchase and Usage Patterns." School of Environment and Society Seminar Series. Tokyo Institute of Technology. Tokyo, Japan. 4 Jul. 2016. Lecture.

Williams, Eric. "Sustainable Consumption — Understanding heterogeneity and lifestyle changes using time-use data." IGES Seminar Series. Institute for Global Environmental Strategies. Hayama, Japan. 5 Jul. 2016. Lecture.

Williams, Eric. "Resolving variability in learning rates for wind power." International Symposium on Sustainable Systems and Technology. Arizona State Univeresity. Phoenix, AZ. 18 Apr. 2016. Conference Presentation.

Williams, Eric. "Can new energy technologies beat cheap oil?" Energy Policy Reseach Conference. Energy Policy Institute. Santa Fe, NM. 2 Sep. 2016. Lecture.

Sekar, Ashok, Eric Williams, and Roger Chen. "Personalizing utility efficiency programs: case study of televisions." Advanced Energy Conference. Advanced Energy Research and Technology Center. New York, NY. 21 Apr. 2016. Conference Presentation.

Goteti, Srujana, Eric Hittinger, and Eric Williams. "CARBON IMPLICATIONS OF ENERGY STORAGE WITH INCREMENTAL PENETRATION OF WIND ENERGY INTO GRID MIX." USAEE North American Conference. United States Association for Energy Economics. Tulsa, OK. 24 Oct. 2016. Conference Presentation.

Gaustad, Gabrielle. "Scarcity and Criticality of PV Relevant Materials: Mitigation Strategies." Distinguished Lecture Series. I/U CRC Center for Next Generation Photovolatics. Austin, TX. 15 Nov. 2016. Keynote Speech.

Babbitt, Callie. "The Food Waste Dilemma." 2016 Disruptive Innovation Festival. Ellen MacArthur Foundation. Rochester, NY. 9 Nov. 2016. Address.

Babbitt, Callie. "Life cycle assessment of engineered nanomaterials." International Conference on the Environmental Effects of Nanoparticles and Nanomaterials. Colorado School of Mines. Golden, CO. 16 Aug. 2016. Keynote Speech.

Babbitt, Callie. "Ecological Models for Analyzing Consumer Electronics." Department Symposium. Syracuse University. Syracuse, NY. 26 Apr. 2016. Lecture.

Williams, Eric. "Sun-to-Wheel Process Chains: Current and Theoretical Maximum Efficiencies." School of Forestry and Environment Seminar. Yale University. New Haven, CT. 19 Mar. 2015. Lecture.

Williams, Eric. "Technological Progress and Energy Policy: Case Studies of Wind, Batteries and Electric Vehicles." Dept of Physics Seminar Series. University of Maryland - Delaware. Delaware, MD. 17 Jun. 2015. Lecture.

Williams, Eric. "Technological Progress and Energy Policy: Case Studies of Wind, Batteries and Electric Vehicles." Dept of Physics Seminar Series. University of Maryland - Delaware. Delaware, MD. 17 Jun. 2015. Lecture.

Williams, Eric. "Using Thermodynamic Limits of Energy Process Chains to Bound Technological Progress." Green Design Initiative Seminar Series. Carnegie Mellon University. Pittsburgh, PA. 29 Oct. 2015. Lecture.

Williams, Eric. "Cascading Discussion and Energy Technology Subsidies: Plug-in Hybrid Electric Vehicles in the United States." College of Nanoscale Science and Engineering Seminar Series. SUNY Polytechnic. Albany, NY. 4 Dec. 2015. Lecture.

Trabold, Thomas A. "Sustainable Food Production." Food-Energy-Water Nexus Workshop. National Science Foundation and American Institute of Chemical Engineers. Baltimore, MD. 8 Oct. 2015. Guest Lecture.

Trabold, Thomas A. "A Game-Changing Opportunity: Organics Recovery and Valorization." Organics Reduction and Recycling Roundtable. New York State Department of Environmental Conservation. Rochester, NY. 9 Jul. 2015. Guest Lecture.

Trabold, Thomas A. "Sustainable Energy Systems." Cultural Enrichment Committee Speakers. Roberts Wesleyan College. Rochester, NY. 30 Mar. 2015. Guest Lecture.

Trabold, T.A. "Fuel Cell Systems for Mobile Power Applications." Mechanical Engineering Seminar Series. University of Rochester. Rochester, NY. 5 Dec. 2014. Guest Lecture.

Trabold, T.A. "Sustainable Energy Pathways: Biomass Waste-to-energy and Integrated Energy Systems." ACS Annual Meeting. American Chemical Society. San Francisco, CA. 14 Aug. 2014. Guest Lecture.

Trabold, T.A. "Sustainable Energy Pathways: Wind, Solar and Electrochemical Systems." NSF Partnerships in Research and Education (PIRE). Case Western Reserve University. Cleveland, OH. 30 May 2014. Guest Lecture.

Trabold, T.A. "Fuel Cell Technology." 11th Tactical Power Sources Summit. Institute for Defense and Government Advancement. Washington, DC. 27 Jan. 2014. Guest Lecture.

Nasr, Nabil Z. "Sustainable Production and the Circular Economy." Seminar on Energy and Sustainability. RIT Dubai. Dubai, UAE. 9 Mar. 2014. Conference Presentation.

Nasr, Nabil Z. "Sustainable Manufacturing and Closed Loop Systems." U.S. NSF – China NSF Workshop on Sustainable Manufacturing. NSF. Wuhan, China. 14 Mar. 2014. Conference Presentation.

Nasr, Nabil Z. "The Future of Manufacturing." Council for Chemical Research Annual Meeting. Council for Chemical Research. Alexandria, VA. 20 May 2014. Conference Presentation.

Nasr, Nabil Z. "Introduction to the Circular Economy." 3rd Annual World Remanufacturing Summit. Golisano Institute for Sustainability. Rochester, NY. 25 Sep. 2014. Keynote Speech.

Nasr, Nabil Z. "Defining Remanufacturing and its Potentials for Increased Resource Efficiency." International Experts Workshop: Towards Resource Efficiency: Innovation and Remanufacturing. Federal Ministry for the Environment. Berlin, Germany. 1 Oct. 2014. Keynote Speech.

Nasr, Nabil Z. "Global Overview of Remanufacturing Activities and Opportunities, Remanufacturing in the US." International Experts Workshop: Towards Resource Efficiency: Innovation and Remanufacturing. Federal Ministry for the Environment. Berlin, Germany. 1 Oct. 2014. Conference Presentation.

Nasr, Nabil Z. "Sustainable Production and the Circular Economy." The International Conference on Industry-Academia Collaboration. Industry Academia Collaboration. Cairo, Egypt. 3 Mar. 2014. Keynote Speech.

Babbitt, C.W. "Product Stewardship in the Digital Era." Invited Presentation. Roberts Wesleyan College. Rochester, NY. 28 Mar. 2014. Lecture.

Richa, K. and C.W. Babbitt. "Environmental Trade-offs of Electric Vehicle Lithium-ion Batteries with a Cascading Second Life." International Symposium on Sustainable Systems and Technology. ISSST. Oakland, CA. 18 May 2014. Conference Presentation.

Krystofik, M., J. Wagner, and G. Gaustad. "Tying Product Reuse into Tying Arrangements: Competitive Advantage by Closing the Loop." 3rd Annual World Remanufacturing Summit. RIT. Rochester, New York. 26 Sep. 2014. Conference Presentation.

Stoker, A., et al. "Implementing Practical Micro-Hydropower." Honorable Mention EPA P3 Award, Sustainable Design Expo. US EPA. Washington, DC. 11, 12 Apr. 2014. Conference Presentation.

Garvey, T., C. Babbitt, and G. Gaustad. "Evaluating the Potential Eco-toxity Impacts of Nanomaterial Manufacture." Pollution Prevention Institute Earth Day Poster Session. RIT. Rochester, NY. 22 Apr. 2014. Conference Presentation.

Wang, X., C. Babbitt, and G. Gaustad. "Nanoparticle Exposure Potential During the Mechanical Treatment of End-of-life Lithium-ion Batteries." Toxicology and Risk Assessment Conference. CDC. Cincinnati, OH. 8-9 Apr. 2014. Conference Presentation.

Garvey, T., C. Babbitt, and G. Gaustad. "Evaluating the Potential Eco-toxity Impacts of Nanomaterial Manufacture." Toxicology and Risk Assessment Conference. CDC. Cincinnati, OH. 8-9 Apr. 2014. Conference Presentation.

Trabold, T.A. "Hydrogen Fuel Cells for Sustainable Energy Production: Stationary, Transportation and Auxiliary Power Applications." Energy for the 21st Century Symposium. University of Rochester. Rochester, NY. 15 Mar. 2013. Guest Lecture.

Nasr, Nabil Z. "Assessment of Remanufacturing Environmental and Energy Benefits An In-Depth Analysis." 2nd World Remanufacturing Summit. National Key Laboratory for Remanufacturing. Shanghai, P.R. China. 3 Dec. 2013. Keynote Speech.

Nasr, Nabil Z. "Remanufacturing Environmental Benefits and Tradeoffs." 20th CIRP Conference on Life Cycle Engineering (LCE 2013). CIRP. Singapore, Republic of Singapore. 18 Apr. 2013. Keynote Speech.

Nasr, Nabil Z. "Panelist - Expert Testimony on Sustainability and Remanufacturing." 13th Session of the International Resource Panel. United Nations Environment Programme. Naivasha, Kenya. 4 Nov. 2013. Conference Presentation.

Nasr, Nabil Z. "Research and Practice of Reuse and Remanufacturing in the U.S." LCE Workshop. Waseda University in connection with members of the LCE Technical Committee of Japanese Society of Precision Engineering. Tokyo, Japan. 13 Apr. 2013. Keynote Speech.

Babbitt, C.W. "End-of-life Lithium Ion Batteries from Electric Vehicles: A Future Perspective on Waste Flows." School of Natural Resources & Environment. University of Michigan. Ann Arbor, MI. 22 Nov. 2013. Lecture.

Babbitt, C.W. "Life Cycle Validation of Sustainability and Design Outcomes Possible from Eco-design Tool Application." LCA XIII. Conference of the American Center for Life Cycle Assessment. Orlando, FL. 2 Oct. 2013. Conference Presentation.

Babbitt, C.W. "Adapting Ecological Models for Analysis of Emerging Technologies." International Symposium of Sustainable Systems and Technology. ISSST. Cincinatti, OH. 16 May 2013. Conference Presentation.

Trabold, T.A. "Neutron and Synchrotron Characterization Methods." National Science Foundation (NSF) Science and Technology Center Site Visit. University of Delaware. Newark, DE. 24 Sep. 2012. Conference Presentation.

Fister, D. and T.A. Trabold. "Waste Cooking Oil to Fuel Program." Climate Showcase Communities - Biodiesel Workshop. Monroe County Department of Environmental Services. Rochester, NY. 5 Oct. 2012. Lecture.

Trabold, T.A. "Environmental and Economic Benefits of Anaerobic Co-Digestion." New York State's First Co-Digestion Biogas Plant Opening. Synergy Biogas LLC. Covington, NY. 1 May 2012. Address.

Trabold, T.A. "Alternative (Sustainable) Energy." Youth Workforce Innovations Conference. Monroe County School Business Partnership. Rochester, NY. 29 Mar. 2012. Lecture.

Nasr, Nabil. "The Next Generation of Remanufacturing: Technology and Sustainability Trends." Remanufacturing and the Sustainable Organization Conference. MERA and Golisano Institute for Sustainability. Troy, MI. 2 Oct. 2012. Keynote Speech.

Nasr, Nabil. "Remanufacturing: A Key Enabler to Circular Economy and Closed Loop Production." 2nd United States-China Remanufacturing Dialogue. U.S. Department of Commerce, International Trade Administration. Washington, DC. 27 Sep. 2012. Conference Presentation.

Nasr, Nabil. "Remanufacturing - The View from the US." 2012 World Remanufacturing Summit. University of Bayreuth. Bayreuth, Germany. 3 Sep. 2012. Keynote Speech.

Nasr, Nabil. "Sustainable Manufacturing and Closed-Loop Systems." 1st Distinguished Speaker Lecture Series. Nanyang Technological University. Singapore, SE Asia. 21 Mar. 2012. Keynote Speech.

Nasr, Nabil. "Next Generation Remanufacturing." NTU-SIMTech Industry Seminar. Nanyang Technological University/SIMTech. Singapore, SE Asia. 20 Mar. 2012. Conference Presentation.

Nasr, Nabil. "Remanufactured Goods: An Overview of the U.S. and Global Industries, Markets, and Trade." U.S. International Trade Commission public hearing. U.S. International Trade Commission. Washington, DC. 28 Feb. 2012. Conference Presentation.

Babbitt, Callie W. "Institutional Disposition and Management of End-of-Life Computing Equipment." Sustainable Electronics Initiative Symposium. University of Illinois, Urbana-Champaign. UIUC, Champaign, IL. 22 Mar. 2011. Conference Presentation.

Trabold, T. A. "Fuel Reforming for Solid Oxide Fuel Cells: Durability Effects and Renewable Fuel Options." Graduate Seminar Series. Department of Chemical Engineering. Queen's University, Kingston, Ontario. 3 Nov. 2011. Guest Lecture.

Trabold, T. A. "Durability of SOFC-based Auxiliary Power Units." Advanced Energy Conference. Advanced Energy Research and Technology Center. Hyatt Regency, Buffalo, NY. 12 Oct. 2011. Conference Presentation.

Trabold, T. A. "Fuel Cells for Mobility, Auxiliary Power and Stationary Power Systems." Guest Lecture Series. Laboratory for Laser Energetics (LLE). University of Rochester, Rochester, NY. 30 Sep. 2011. Guest Lecture.

Nasr, Nabil. "Assembly System Design and Operations for Product Variety." 61st CIRP General Assembly, Session on Assembly. CIRP; The International Academy for Production Engineering. InterContinental Budapest Hotel, Budapest, Hungary. 22 Aug. 2011. Keynote Speech.

Nasr, Nabil. "Metrics for Sustainable Production." 61st Annual IIE Conference and Expo. Institute of Industrial Engineers. Grand Sierra Resort Hotel, Reno, NV. 25 May 2011. Conference Presentation.

Nasr, Nabil. "Global Sustainability Challenges." Raytheon 2011 Environment Health and Safety Leadership Forum. Raytheon Company. Grand Hyatt Tampa Bay, Tampa Bay, FL. 19 Apr. 2011. Keynote Speech.

Nasr, Nabil. "Sustainability in Manufacturing - A Business Opportunity." Business Opportunities in Sustainable Manufacturing. Singapore Institute of Manufacturing Technology (SIMTech). Sustainable Manufacturing Centre, Singapore, Singapore. 21 Jan. 2011. Keynote Speech.

Nasr, Nabil. "An Approach to Comprehensive Evaluation of Sustainable Manufacturing Tradeoffs." ICOSSE 2011. International Congress on Sustainability Science and Engineering. J.W. Marriott Starr Pass Hotel, Tucson, AZ. 10 Jan. 2011. Keynote Speech.

Ph.D., Nabil Nasr,. "Re-defining Value - The Manufacturing Revolution, Remanufacturing, Refurbishment, Repair and Direct Reuse in the Circular Economy." World Circular Economy Forum. Sitra. Yokohama,, Japan. 23 Oct. 2018. Keynote Speech.

Ph.D., Nabil Nasr,. "Business Models and Initiatives in Support of Circularity." A Roadmap to the Future of Global Sustainable Growth – Closing the Loop with Partnerships and Circular Business Models. Danish Cleantech Hub. New York City, NY. 25 Sep. 2018. Conference Presentation.

Ph.D., Nabil Nasr,. "Assessment of Resource Efficiency and Innovation in Circular Economy through Remanufacturing, Refurbishment, Repair and Direct Reuse." G7 Value Retention Policies Workshop on Advancing Remanufacturing, Refurbishment, Repair and Direct Reuse. European Commission. Montreal, Ontario, Canada. 21 Jun. 2018. Keynote Speech.

Nasr, N. "Sustainability Issues for a New Administration/Congress." 2017 Consumer Electronics Show. Consumer Technology Association. Las Vegas, NV. 7 Jan. 2017. Conference Presentation.

Nasr, N. "Gains from Remanufacturing, Refurbishment, Repair, and Direct Reuse; Insights from the International Resource Panel." The European Commission and the International Resource Panel Workshop on Promoting Remanufacturing, Refurbishment, Repair and Direct Reuse as a Contribution to the G7Alliance on Resource Efficiency. The European Commission and the United Nations Environment Programme. Brussels, Belgium. 7 Feb. 2017. Keynote Speech.

Nasr, N. "Barriers for Advancing Remanufacturing, Refurbishment, Repair and Direct Reuse." The European Commission and the International Resource Panel Workshop on Promoting Remanufacturing, Refurbishment, Repair and Direct Reuse as a Contribution to the G7Alliance on Resource Efficiency. The European Commission and the United Nations Environment Programme. Brussels, Belgium. 7 Feb. 2017. Keynote Speech.

Nasr, N. "Sustainable Production and the Circular Economy." Department of Civil & Urban Engineering Distinguished Faculty Seminar. Tandon School of Engineering, NYU. Brooklyn, NY. 17 Feb. 2017. Guest Lecture.

Nasr, N. "The Big Picture; Opportunities and Challenges." CE100 USA Acceleration Workshop. The Ellen MacArthur Foundation. Seattle, WA. 8 Mar. 2017. Keynote Speech.

Nasr, N. "Future Technologies for the Circular Economy." World Circular Economy Forum. Sitra. Helsinki, Finland. 6 Jun. 2017. Keynote Speech.

Nasr, N. "Introduction to Reman Roadmap." RIC-RIT World Remanufacturing Conference. Remanufacturing Industries Council & RIT. Rochester, NY. 21 Jun. 2017. Keynote Speech.

Nasr, N. "The REMADE Institute." Aircraft Fleet Recycling Association Annual Meeting. AFRA. Reston, VA. 10 Jul. 2017. Keynote Speech.

Nasr, N. "Sustainable Production and Eco-Innovation." US Business Council for Sustainable Development Annual Summer Conference. The Ohio State University. Columbus, OH. 18 Jul. 2017. Keynote Speech.

Nasr, N. "Achieving the Circular Economy and the Role of EPR." U.S. Product Stewardship Forum. Product Stewardship Institute. Boston, MA. 25 Jul. 2017. Conference Presentation.

Nasr, N. "Global Challenges for Remanufacturing." MERA-GIS Remanufacturing and Sustainability Conference. MERA. Troy, MI. 4 Oct. 2017. Keynote Speech.

Nasr, Nabil. "Sustainable Production and the Circular Economy." Sustainability @ Wayne State Seminar Series. Wayne State University. Detroit, MI. 8 Mar. 2016. Guest Lecture.

Nasr, Nabil. "Sustainable Materials Management (SMM) - Why SMM and Why Now?" APEC Dialogue on Sustainable Materials Management (SMM). Asia-Pacific Economic Cooperation. Lima, Peru, N/A. 17 Aug. 2016. Keynote Speech.

Nasr, Nabil. "Transforming the Future: The Next Generation of Remanufacturing." GIS-MERA Remanufacturing and Sustainability Conference. MERA. Troy, MI. 28 Sep. 2016. Keynote Speech.

Nasr, Nabil. "Sustainable Production and the Circular Economy." 5th Congress on Resource Efficiency and Circular Economy Baden-Wurtemberg. Baden-Wurtemberg Ministry of Environment, Climate and Energy. Karlsruhe, Germany, N/A. 6 Oct. 2016. Keynote Speech.

Nasr, Nabil. "Global Advanced Remanufacturing Technologies: Application and Innovation." Asia Pacific Remanufacturing Cooperation Summit. APRA Asia-Pacific. Wuhan, China, N/A. 18 Oct. 2016. Keynote Speech.

Nasr, Nabil. "Sustainable Development and the Circular Economy." Conference on Sustainable Development and Collaborative Governance. New York State Governor's Office. Rochester, NY. 2 Nov. 2016. Conference Presentation.

Nasr, N. "Global Perspectives on Materials and Manufacturing." Defense Materials, Manufacturing and Infrastructure (DMMI) Workshop on Globalization on Defense Materials and Manufacturing. National Academy of Sciences. Washington, DC. 25 Mar. 2015. Conference Presentation.

Nasr, N. "Sustainability Through Remanufacturing." 18th Annual Electrical Safety, Reliability and Sustainability Conference. PEARL. Cleveland, OH. 27 Apr. 2015. Conference Presentation.

Nasr, N. "Remanufacturing in the Americas." 2015 World Remanufacturing Summit. ReMaTec. Amsterdam, The Netherlands. 16 Jun. 2015. Conference Presentation.

Nasr, N. "Energy Systems and Remanufacturing." 2015 Circular Economy 100 (CE100) Annual Summit. The Ellen MacArthur Foundation. London, England. 24 Jun. 2015. Conference Presentation.

Nasr, N. "Resource Recovery from Construction and Demolition Waste." 6th Regional 3R Forum in Asia and the Pacific. UN Centre for Regional Development. Male, Maldives. 18 Aug. 2015. Keynote Speech.

Nasr, N. "Remanufacturing in the Context of the Circular Economy; Potential Environmental Benefits, and Current Technologies and Opportunities." UN Environment Programme International Resource Panel Special Session. UNEP. Male, Maldives. 18 Aug. 2015. Conference Presentation.

Nasr, N. "Sustainable Production and the Circular Economy." Trottier Institute for Sustainability in Engineering and Design Seminar. McGill University, TSIED. Montreal, Quebec. 10 Sep. 2015. Guest Lecture.

Nasr, N. "Circular Economy and Resource Efficiency." UN Environment Programme 17th Meeting of the International Resource Panel and its Steering Committee. UNEP. Davos, Switzerland. 14 Oct. 2015. Conference Presentation.

Andrejko, Dennis A. American Institute of Architects - New York State. James William Kideney Gold Medal. Albany, NY, 2014.

Chiavaroli, Jules. American Institute of Architects (AIA). AIA Component Assistance Leadership Grant. Washington, DC, 2013.

Potestí , Giovanna. Kuwait University Research Sector. Excellency in Research. Kuwait, Kuwait, 2013.

Nasr, N. Remanufacturing Industries Council. 2017 ACE Award. Rochester, NY, 2017.

Nasr, N. Rochester Engineering Society. 2017 Engineer of Distinction. Rochester, NY, 2017.

Nasr, N. Rochester Business Journal and Rochester Technology and Manufacturing Association. Chairperson's Award, Technology and Manufacturing Award. Rochester, NY, 2017.

Nasr, Nabil. APRA Asia-Pacific. The Most Influential Expert on Remanufacturing Award. Wuhan, China, N/A, 2016.

1/1/2016 - 12/30/2016
     American Institute of Architects - New York State Honor Awards Jury
     Amount: 0

1/1/2015 - 12/31/2017
     International Code Council (ICC) - ECIC Code Interpretation Committee
     Amount: 0

1/1/2000 - 5/30/2003
     University of Florence and Immobiliare Novoli SpA
     Amount: 60.000

2/15/2016 - 3/15/2016
     International Association of Traditional Environment, Berkeley, CA
     Amount: 0

11/11/2015 - 4/1/2016
     Rochester Chapter New Urbanism
     Amount: 0

1/23/2016 - 5/10/2016
     Rochester Community Design Center
     Amount: 0

1/20/2015 - 3/20/2015
     University of Florence, Italy
     Amount: 0

11/1/2014 - 11/1/2015
     Kuwait University
     Amount: 15.000

5/1/2012 - 5/1/2013
     Kuwait University
     Amount: 10.000

3/25/2019 -3/24/2020
     National Science Foundation
     Amount: 47,742

12/1/2019 -11/30/2024
     National Science Foundation
     Amount: 513,442

8/1/2018 - 9/31/2019
     Ford Motor Company
     Amount: $20000

1/1/2019 - 12/31/2021
     National Science Foundation
     Amount: $298,713

7/1/2018 - 6/30/2021
     National Science Foundation
     Amount: $295,105

4/4/2019 -2/28/2020
     Consumer Technology Association
     Amount: 28,000

10/1/2017 - 12/31/2018
     Ford Motor Company
     Amount: $18,000

1/1/2017 - 1/31/2018
     Consumer Technology Association
     Amount: $90,000

3/1/2016 - 4/4/2017
     Ellen Macarthur Foundation
     Amount: $3000

7/1/2016 - 6/30/2019
     National Science Foundation
     Amount: $297,789.00

3/1/2016 - 8/31/2017
     U.S. Department of Energy
     Amount: $149,793

9/1/2016 - 8/31/2020
     National Science Foundation
     Amount: $991,925

1/1/2017 - 1/31/2018
     Consumer Technology Association
     Amount: $90,000

8/1/2016 - 5/31/2017
     Staples Sustainable Innovation Lab
     Amount: $36,148

7/1/2016 - 7/31/2016
     Japanese Society for the Promotion of Science
     Amount: $7000

8/1/2014 - 7/31/2017
     National Science Foundation
     Amount: 300,854

7/1/2013 - 6/30/2018
     National Science Foundation CAREER
     Amount: 400,355

9/1/2012 - 8/31/2015
     National Science Foundation
     Amount: $298,610

Gaustad, G., E. Olivetti, and R. Kirchain. “Design for Recycling: Evaluation and Efficient Alloy Modification.” Journal of Industrial Ecology, 14.2 (2010): 286-308. Web. *

Gaustad, G,. E. Olivetti, and R. Kirchain. “Towards Sustainable MaterialUsage: Investigating Limits to SecondaryAluminum Sinks.” Proceedings of theSustainable Technologies Symposium, TheMinerals, Metals, & Materials Society (TMS)Annual Meeting, Extraction and Processing Division Congress. 14-18 Feb. 2010. Print. *

Owejan, Jon P., JeanetteE. Owejan, Wenbin Gu, Thomas A. Trabold,Thomas W. Tighe and Mark F. Mathias. “Water Transport Mechanisms in PEMFCGas Diffusion Layers.” Journal of theElectrochemical Society, 157.10 (2010): B1456-B1464. Print. *

Daino, M.M., Z. Lu, J.M.LaManna, J.P. Owejan, T.A. Trabold and S.G. Kandlikar. “Through-Plane Water TransportVisualization in an Operating PEM Fuel Cell by Visible and Infrared Imaging.” ECS Transactions, 33.1 (2010): 1423-1433. Web. * "  É 

Kandlikar, S., Z. Lu, N. Rao, J. Sergi, C. Rath, C. McDade, T. Trabold, J. Owejan, J. Gagliardo, J. Allen, R.S. Yassar, E. Medici, and A. Herescu. “Visualization of Fuel Cell Water Transport and Performance Characterization under Freezing Conditions.” U.S. Department of Energy, 25 June 2010. DOE/GO/17018. Web.

Babbitt, C.W., and A.S. Lindner. “Effect of nitrogen source on methanol oxidation and genetic diversity of methylotrophic mixed cultures enriched from pulp and paper mill biofilms.”Biodegradation, (2010). Web. * É 

Stiebitz, P., T. Seager,C. Babbitt, G. Gaustad, and N. Nasr. “Curriculum Development for theSustainability PhD Program at RIT.” International Symposium on SustainableSystems and Technology. Arlington, VA. 17-19 May 2010. Presentation. * É 

Krystofik, M., Jeffrey Wagner, and G. Gaustad. “Sustainability Concerns Related to Product Design in TyingArrangements.” New York State EconomicsAssociation Conference. Rochester, NY. 24-25 Sept. 2010. Presentation. " 

Krystofik, M., C.W. Babbitt, and G. Gaustad. “Economic and Environmental Impacts of End-of-Life Decisions for Inkjet Cartridges in the US.” International Symposium on Sustainable Systems and Technology. Arlington, VA. 17-19 May 2010. Presentation. " 

Trabold, T.A. “Water and Thermal Management in PEM Fuel Cells.” 14th International Heat Transfer Conference (ITHC-14). Washington, DC. 14 Aug. 2010. Presentation.

Owejan, J.P., J.J. Gagliardo, and T.A. Trabold. “PEMFC Water Transport and Material Properties Correlated with Neutron Diagnostic Methods.” 2nd CARISMA International Conference on Progress in MEA Materials for Medium and High Temperature Polymer Electrolyte Fuel Cells. La Grand Motte, France. 19-22 Sept.2010. Presentation.

Fronk, M., N. Nenadic, S. Dewey, T. Trabold, B. Landi, and M. Ganter. “Battery Cell Durability within a Pack.” 2010 Advanced Energy Conference. New York, NY. 9 Nov. 2010. Presentation. " 

Babbitt, Callie, and Erinn Ryen. “Product and function evolution in information and communication technologyLCA studies.” LCAX: Conference of the American Center for Life Cycle Assessment.Portland, OR. 03 Nov 2010. Presentation. " 

Babbitt, Callie, and Erinn Ryen. “Bridging the Gap in Forward and Reverse Supply Chains for EvolvingElectronic Products.” InternationalSymposium on Sustainable Systems and Technology. Arlington, VA. 17-19 May 2010. Presentation. " 

Babbitt, Callie,Rachel Deng, and Eric Williams. “Economic-Balance Hybrid Life Cycle Assessment of a Laptop Computer.” Electronics andSustainability Symposium. Champaign, IL. 23-24 Feb. 2010. Presentation.

Trabold, Thomas.Journal of Thermal Sciences and Engineering Applications. New York: American Society of Mechanical Engineers (ASME). Print.