RIT Tunnel Guide

by Rashmi Jeswani, Information Sciences and Technologies MS student

Rochester gets cold during the winter. Bitterly cold. Once the snow starts falling and the temperature starts dropping, you begin questioning whether or not you want to go outside. Fortunately, RIT has an extensive tunnel system throughout the campus that can get you from class to class with minimal exposure to the elements. However, if you’ve ever been down there, you know that it takes some exploration to get the layout down. That’s why we’ve put together the ultimate guide to the RIT tunnels to get you on your way come wintertime. For reference, you can access maps of the tunnels on the FMS website.

Residence Hall Tunnels

Probably the most familiar tunnel system to most RIT students is the one that connects most of residential side together. Everyone who lives in the residence halls goes down there at some point, whether it be to go to Gracie’s during the winter or do your laundry. However, there are some hidden aspects of the system that you may not have seen if you have not spent too much time down there. You also might only be familiar with a small segment of the system that gets you to Gracie’s or the post office. Getting around in the tunnels can be a bit disorienting at first, so it’s good to know some major landmarks in the system. Your first landmark should be knowing the location you usually enter at, so at the very least if you get turned around, you can make your way back there. This could be any of the dozen or so entrances to the tunnel system, coming from any of the buildings on residential side. Some of the major landmarks include Sol’s Underground, the Corner Store, and the curved tunnel leading up to Gracie’s.

Academic Side Tunnels

The academic-side tunnels are a very different beast from the dorm-side tunnels. People use them a lot less, often favoring to brave the cold or walk through the upper levels of building rather than figure them out. There are three distinct systems on academic side, and they are not nearly as large as the dorm side system. There is a system connecting the SAU and the Eastman building, one for the Infinity Quad system, and the tunnels under Booth and Gannett halls. The SAU-Eastman tunnels begin directly under the bridge between academic and residential side, leading into the athletics area. The easiest way to get in, however, is right through the Center for Campus Life near the fountain. Behind the fountain, there is a stairwell that will lead you down into the lower level. The main tunnel system door will be right in front of you. To get to Eastman, head past the WITR studio and the elevators and stairwell into the building will be at the end of the hall. If you make a turn in front of the WITR studio, that hallway will bring you up to RITZ Sports Zone and the stairs to the SAU.

The Infinity Quad system connects the Wallace Library, Liberal Arts Hall, Gleason Hall, and Gosnell Hall together. You also have the ability to make it all the way to Louise Slaughter Hall without stepping outside via the pedestrian bridge that connects Engineering Hall and Golisano Hall. This system can be a bit confusing, especially in the twists and turns of the area under Liberal Arts Hall. However, once you get the hang of it, getting around is a breeze. Once you enter the library basement, head toward the large, glass walled classroom. Past this, you’ll enter the Liberal Arts Hall basement, which contains some of the larger lecture halls on campus, such as A201 or A205. The tunnel that leads you to the rest of the system is behind a set of double doors labeled in a recessed part of the basement next to some offices “TO ENGINEERING.” Don’t worry if those doors are shut, they keep them closed to make sure the heat from the various pipes does not overheat Liberal Arts hall.

Once you’re through there, you will have the option to walk straight through to Gleason, or make a left and head to Gosnell.  Getting all the way to Slaughter while staying inside involves heading up into Gleason, which connects to Engineering hall, and heading up to the second floor to get to the bridge. This will bring you across to Golisano. After you get there, head through the building until it connects to Slaughter Hall on the far end. Finally, you have the tunnels underneath Booth and Gannett.

Once you figure out the system, it’s almost as fast as taking the Quarter Mile to class every day. That said, make sure you know the system before using it five minutes before you need to be at class. Familiarize yourself with the routes one day so you’re able to navigate the tunnels like a pro when old man winter comes knocking.

 

#myRITstory – Jinkai Qian

Jinkai Qian, Print Media MS

“RIT graduates work in the knowledge-based positions…in both production management and upper management positions…they are the most knowledgeable about color, printing, and pre-media applications, as well as the production workflow.”

Turning points are pivotal moments in life in which decisive change occurs. For Shanghai native Jinkai Qian, one such turning point was when a professor from the Master’s Degree in Print Media (MS-PPRT) program at Rochester Institute of Technology (RIT) came to visit the University of Shanghai for Science and Technology (USST). At the time, Jinkai was working on a Bachelor of Science degree in Digital Printing and was intrigued by the curriculum of the MS-PPRT program. Researching the RIT program further, he learned of the reputation of the program, including the extensive alumni network and impressive placement of graduates in meaningful jobs at major companies. This convinced Jinkai that his next move would be coming to the US to study at RIT in 2010.

At RIT, Jinkai went through the course sequence in the MS-PPRT program, which entails three academic semesters followed by thesis work. His coursework and thesis imparted the necessary skills that have helped Jinkai in his co-op experiences and subsequent career.

Jinkai names the STEM-based laboratory courses, which employ hands-on exercises that stress critical thinking and technical writing with the latest equipment as especially beneficial in his ensuing endeavors.

Jinkai took advantage of both Curricular Practical Training (CPT) and Optional Practical Training (OPT) for paid co-op experiences. Both of his co-ops were on the print production side of the business, first at CSI in Virginia and then at The Matlet Group in Florida. His responsibilities included color management, managing job workflows, working in the pre-media department, and order handling.

After his co-op work, Jinkai joined the vendor side of the business with a technical applications job at Techkon USA, a major manufacturer of color measurement devices with offices near Frankfurt, Germany and Boston, MA. Among the award-winning products offered by Techkon USA are hand-held and scanning spectrodensitometers, quality assurance/ink formulation systems, and even a spectrophotometer designed for flexographic printing that measures traceable metrics on a web moving up to 300 meters per minute.

Jinkai supports Techkon’s customer base throughout North America for installations and on-site training and support. His responsibilities require regular travel to major printing companies throughout the region. In addition to supporting clients, Jinkai is regularly in touch with the software and hardware engineers in the corporate offices to make sure that the new products and updates meet the needs of North American printers. As such, Jinkai has been trained on the latest printing certifications, including as a G7 Expert, BrandQ Supply Chain expert, and Certified Color Management Professional by IDEAlliance.

Jinkai cites the key role of his RIT coursework in obtaining his current position. He believes that this helped him to secure the job over several other candidates, and stands as a testament to the relevance of the curriculum.

When asked if he meets RIT alumni in his work, he responds: “All the time! I meet RIT alumni at both production facilities and trade shows: RIT graduates work in the knowledge-based positions…in both production management and upper management positions…they are the most knowledgeable about color, printing, and pre-media applications, as well as the graphic production workflow.”

Today, Jinkai lives with his wife and young son in the Boston suburbs and is pursuing US-resident status, intending to stay long-term. Jinkai recognizes that his job at Techkon USA, obtained as a result of his STEM-based Master of Science in Print Media degree from RIT, is integral to his aspirations.

Read more about RIT’s MS in Print Media on our program website here.