RIT researchers develop new gene transfer method

Research led by University of Rochester Medical Center and RIT’s Kate Gleason College of Engineering highlights engineering collaborations in medicine

This graphic illustrates the device fabrication process and the edges of the bundled carbon nanotubes used to introduce bio-molecules into cells.

Researchers from Rochester Institute of Technology and the University of Rochester Medical Center have developed a new, more efficient method for gene transfer. The technique, which involves culturing and transfecting, or inserting, bio-fluids into cells through an array of carbon nanotubes, has the potential to overcome the limitations of other gene transfecting technologies.

“This represents a very simple, inexpensive and efficient process that is well-tolerated by cells and can successfully deliver DNA into tens of thousands of cells simultaneously,” said Michael Schrlau, co-author and assistant professor of mechanical engineering in RIT’s Kate Gleason College of Engineering.

Gene modification can enable researchers to precisely target segments of genetic code giving rise to a range of potential scientific and medical applications from fixing genetic defects, to manipulating stem cells, to reengineering immune cells to fight infection and cancer.

“This platform holds the potential to make the gene transfer process more robust and decrease toxic effects, while increasing amount and diversity of genetic cargo we can deliver into cells,” said Ian Dickerson, associate professor in the Department of Neuroscience at the URMC and co-author of the paper, “High-efficiency gene transfection of cells through carbon nanotube arrays” described in a study published in the journal Small.

Scientists currently employ several different methods to insert new genetic instructions into cells, including creating small holes in the cell membrane using electrical pulses, injecting DNA into cells using a device called a “gene gun,” and employing viruses to “infect” cells with new genetic code.

However, all of these methods tend to suffer from two fundamental problems, Dickerson explained. The processes can be highly toxic, leaving scientists with too few healthy cells to work with, and the methods are restricted in the amount of genetic information they can deliver into the cells. This limits their application. These techniques can also be time consuming and expensive.

The new device described in the study was fabricated by Masoud Golshadi, a doctoral student in Schrlau’s Nano-Bio Interface Laboratory at RIT. This lab research team investigates nano-manufacturing techniques to produce novel materials and devices to interact with biological systems. Carbon nanotubes are cylindrical lattices made of carbon fibers that can be used in the development of electronics, optics and nanotechnology. They are smaller than the width of a human hair, are light weight but strong and capable of thermal and electrical conductivity.

The carbon nanotube arrays that Schrlau developed are shaped like tiny drinking straws and a series of them are bundled together to spread fluids or molecules to cells over a larger surface space, increasing the ability to introduce more test bio-fluids into larger, and more varied populations of target cells for analysis, Schrlau explained.

Using a process called chemical vapor deposition, researchers created a structure akin to a honeycomb consisting of millions of densely-packed carbon nanotubes with openings on both sides of a thin disk shaped membrane.

The device was employed in the Dickerson lab at URMC to culture a series of different human and animal cells. After 48 hours, the cells were bathed in a medium that contained liquid DNA. The carbon nanotubes acted as conduits drawing the genetic material into the cells. Using this method, the researchers observed that 98 percent of the cells survived and 85 percent were successfully transfected with the new genetic material.

The mechanism of DNA transfer is still under investigation, but the researchers believe it may be accomplished through a process called enhanced endocytosis, a method by which cells transfer bundles of proteins back and forth through the cell membrane. The device has also shown the ability to successfully culture a wide range of cell types, including cells that are typically difficult to grow and keep alive, such as immune cells, stem cells, and neurons.

Additional co-authors of the study include Golshadi and Leslie Wright, associate professor of biotechnology and molecular bioscience in RIT’s College of Science. The research was supported with funding from the Schmitt Program on Integrative Brain Research, the American-German Partnership to Advance Biomedical and Energy Applications of Nanocarbon, Texas Instruments, the Feinberg Foundation and the Weizmann Institute of Science.

Topics
engineering
health
science
innovation

Recommended News

  • June 12, 2019

    'Milky Way galaxy.'

    New evidence shows crash with Antlia 2 gave the Milky Way the ripples in its outer disc

    The newly-discovered dark dwarf galaxy Antlia 2’s collision with the Milky Way may be responsible for our galaxy’s characteristic ripples in its outer disc, according to a study led by Assistant Professor Sukanya Chakrabarti. The Antlia 2 dwarf galaxy was discovered from the second data release of the European Space Agency’s Gaia mission, which aims to chart a three-dimensional map of our galaxy.

  • June 11, 2019

    'Head-on view of baja car and driver covered in mud.'

    Grit Happens: Baja SAE Rochester crowns season race champion at RIT and Hogback Hill

    The University of Michigan-Ann Arbor took first place overall at the 2019 Baja SAE Rochester challenge, an international student-design competition that challenges students to apply classroom knowledge with real-world applications. RIT placed 10th overall among 100 collegiate race teams that took on a daunting motor cross field and four challenging days of competition.

  • June 10, 2019

    'Four people stand together, with two in center holding glass awards.'

    Saunders College names Optimax president, CEO as 2019 Vanden Brul Award recipients

    Michael Mandina, president of Optimax, and Richard Plympton, CEO of Optimax, have been named the 2019 recipients of the Herbert W. Vanden Brul Entrepreneurial Award, presented by Saunders College of Business. The award is given to entrepreneurial leaders in the greater Rochester region who have developed a business that has improved the local or regional economy or whose innovative management skills have changed the course of an existing business.